High Temperatures Special Alloy Wire Mesh
Material: Bright pure tungsten wire, tungsten content > 99.95%, black pure tungsten wire
Mesh count: 2-200 mesh
- Smooth surface, greaseless with no broken wires
- Stable nature with large resistance
- High melting point (3400°C)
- Excellent high temperature resistance
- Electromagnetic shielding mesh
- Vacuum heat treatment furnace grate
- RF electromagnetic shielding
- High temperature filtering
- Vacuum furnace heating elements
Material: Pure molybdenum wire, molybdenum alloy wire
Mesh count: 1-300 (some in stock)
Melting point: 2610-2640°C
Weaving: Plain weave, twill weave, dutch weave
- High tensile strength with low elongation
- Resistant to acids, alkalis, and corrosion
- Excellent high temperature resistance
- Good electrical conductivity
- Lightweight with various hole shapes
- Superior filtering performance
- Aerospace and nuclear power fields
- Electro-vacuum industry
- Glass furnaces
- Petroleum, oil and gas industry
- New energy industries
- Food processing
Purity: 99.99%, 99.95%, 99.90%
Mesh counts: 0.2-200 mesh
Wire diameter: 0.08-2.0mm
Roll width: 0.01-2m
Weaving type: Plain weave or twill weave
Minimum Order Quantity: Stocked items: 10cm×10cm, Customized items: 1 square meter
Material: 1Cr13AL4, 1Cr12AL4, 0Cr21AL6, 0Cr23AL5, 0Cr25AL5, 0Cr21AL6Nb, 0Cr27AL7Mo2
Mesh counts: 2-200 mesh
Weave type: Plain weave and twill weave
| Material | Temperature (°C) |
|---|---|
| 1Cr13Al4 | 950° |
| 1Cr21Al4 | 1100° |
| 0Cr21Al6 | 1250° |
| 0Cr23Al5 | 1250° |
| 0Cr25Al5 | 1250° |
| 0Cr21Al6Nb | 1350° |
| 0Cr27Al7Mo2 | 1400° |
- Excellent heating resistance
- Superior oxidation and sulfur resistance
- Anti-penetration properties
- High surface load capacity
- High electrical resistivity
- Long-lasting durability
Material: Monel400, Monel401, Monel404, Monel R405, Monel k-500
Mesh: 2-200 mesh
Weave: Plain weave, Twill weave
Melting point: 1300-1350°C
- Superior corrosion and acid-alkali resistance
- Excellent high temperature resistance
- Resistance to stress corrosion
- High tensile strength and hardness
- Chemical and petrochemical industry
- Marine development
| Mesh/Inch | Wire diameter (mm) | Aperture (mm) | Mesh/Inch | Wire diameter (mm) | Aperture (mm) |
|---|---|---|---|---|---|
| 1 mesh | 5.00×5.00 | 20.40 | 18 mesh | 0.35×0.35 | 1.06 |
| 2 mesh | 1.80×1.80 | 10.90 | 20 mesh | 0.30×0.30 | 0.97 |
| 3 mesh | 1.60×1.60 | 6.87 | 30 mesh | 0.25×0.25 | 0.60 |
| 4 mesh | 1.20×1.20 | 5.15 | 40 mesh | 0.21×0.21 | 0.43 |
| 5 mesh | 1.00×1.00 | 4.08 | 50 mesh | 0.19×0.19 | 0.32 |
| 6 mesh | 0.80×0.80 | 3.43 | 60 mesh | 0.15×0.15 | 0.27 |
| 7 mesh | 0.70×0.70 | 2.93 | 70 mesh | 0.14×0.14 | 0.22 |
| 8 mesh | 0.65×0.65 | 2.53 | 80 mesh | 0.12×0.12 | 0.20 |
| 10 mesh | 0.60×0.60 | 1.94 | 100 mesh | 0.10×0.10 | 0.154 |
| 12 mesh | 0.50×0.50 | 1.62 | 120 mesh | 0.08×0.08 | 0.132 |
| 14 mesh | 0.45×0.45 | 1.36 | 150 mesh | 0.065×0.065 | 0.104 |
| 15 mesh | 0.40×0.40 | 1.29 | 200 mesh | 0.050×0.050 | 0.077 |
| 16 mesh | 0.40×0.40 | 1.19 | 250 mesh | 0.040×0.040 | 0.062 |
The nickel-chromium system shows excellent solubility of chromium in nickel, reaching maximum at 47% at eutectic temperature and about 30% at room temperature. These commercial alloys offer outstanding resistance to high temperature oxidation, corrosion, and good wear resistance.
- Low nickel content with low temperature resistivity factor
- Cost-effective alternative to higher nickel content alloys
- Maintains performance with slight element redesign
90% Ni, 10% Cr (Chromel alloy): Used in positive conductors of Type E and K thermocouples, suitable for use up to 1100°C in oxidizing atmospheres.
- Oxidation resistance components
- Heating elements
- Thermocouples
- High temperature corrosion resistant alloys
- Wear resistant alloys
| C % | Si % | Mn % | Cr % | Ni % | Fe % | |
|---|---|---|---|---|---|---|
| Nominal composition | Bal. | |||||
| Min | - | 1.5 | - | 21.0 | - | 8.0 |
| Max | 0.10 | 3.0 | 1.0 | 23.0 | - | 9.0 |
| Wire size | Yield strength | Tensile strength | Elongation | Hardness |
|---|---|---|---|---|
| Ø 0.5mm (0.020in.) | 390 MPa (56.6 ksi) | 800 MPa (116 ksi) | 35% | 190 Hv |
| Density | 8.10 g/cm³ (0.293 lb/in³) |
|---|---|
| Electrical resistivity at 20°C | 1.19 Ω mm²/m (716 Ω/cmf) |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.