Low MOQ 1000PCS Empty Aerosol Tin Can with 2K Two-Component Valve and Corrosion Resistant Tinplate for Industrial Spray Paint

This aerosol 2k can is purpose-engineered for 2K (two-component) coating systems, delivering professional-grade coating performance with the ease of a spray can. Whether you fill acrylic enamel, polyurethane clear coat, epoxy primer or automotive base coat, this tinplate aerosol container turns a hand-held can into a precision finishing tool.

• 2-Component Design: Ideal for precise two-component spray applications, ensuring optimal mixing and curing.
• Durable Tinplate: Strong and resistant to corrosion, providing long-lasting performance in various industrial settings.
• 2 Valves & 2 Plastic Caps: Easy customization and secure closure, enhancing usability and control.
• Low MOQ 1000PCS: Ideal for small-scale production runs, offering flexibility and cost efficiency.

Choosing between a 2K aerosol can and a standard (1K) aerosol can determines the final film quality of your coating. Here is how they differ:

• Curing mechanism: A 2K can keeps the paint resin and hardener (activator) in separate internal chambers until the moment of spraying, so cross-linking occurs during application. A regular 1K can holds a pre-mixed, air-drying formula that never achieves true chemical curing.
• Film hardness and durability: 2K systems form a tough, chemical-resistant film with outstanding adhesion and scratch resistance. 1K systems remain softer and are prone to yellowing, chalking and solvent attack.
• Gloss and leveling: The reactive curing of 2K paint delivers deep gloss and mirror-like leveling comparable to spray gun application, while 1K finishes often show orange peel and lower gloss retention.
• UV and weather resistance: 2K clear coats resist UV degradation and weathering for years; 1K lacquers fade and crack quickly under sunlight.
• No pot-life waste: In a 2K can, the activator is released only when the user presses the actuator, eliminating the pot-life waste typical of pre-mixed paint.

• Spray-gun grade finish: Fine atomization and consistent internal pressure deliver smooth, even coats without brush marks, runs or sags.
• Internal separator design: Keeps resin and activator isolated until use, guaranteeing fresh, reactive paint on every spray.
• Corrosion-resistant tinplate body: Electrolytic tinplate with epoxy-phenolic inner lacquer protects solvent-based and waterborne formulations.
• High burst strength: 1.5 MPa test pressure with a minimum burst pressure of 1.8 MPa ensures safe filling, transport and storage.
• Precision valve compatibility: Works with 2K valves, bag-on-valve and piston systems for full formulation flexibility.

• Automotive refinish and touch-up (clear coat, base coat, primer)
• Industrial maintenance and anti-corrosion coating
• Marine and aerospace touch-up repair
• Furniture and wood finishing (PU lacquer)
• DIY restoration and custom painting projects

• Capacity: 250 ml
• Material: Electrolytic tinplate, 0.18-0.28 mm
• Can diameter: 52mm; Can height: 130 mm
• Inner coating: Epoxy-phenolic, FDA-grade option available
• Test pressure: 1.3 MPa; Burst pressure: 1.5 MPa minimum
• Valve system: 2K two-component valve with internal separator
• Propellant compatibility: LPG, DME, compressed air, nitrogen
• Printing: CMYK

Yes. The internal separator keeps the resin and activator apart until spraying, making it ideal for 2K clear coat, base coat, PU paint and epoxy primer.

A 2K aerosol can stores two reactive components separately and mixes them at the moment of spraying, producing a chemically cured, spray-gun grade finish. A regular aerosol can contains pre-mixed paint that only air-dries and cannot match 2K durability, gloss or weather resistance.

Yes, we offer CMYK offset printing, but the printing MOQ should reach 7500pcs.