Anhydrous Calcium Chloride 94% Purity Flake and Pellet for Oil Drilling and Desiccant Use
Anhydrous Calcium Chloride 94% Flake And Pellet for Oil Drilling
Anhydrous Calcium Chloride is an industrial-grade inorganic salt available in flake and pellet form, with purity levels of 94% and above. It is produced through the reaction of hydrochloric acid with calcium carbonate, followed by high-temperature dehydration. The product contains minimal moisture and delivers consistent performance in moisture-absorption and exothermic applications.
|
Item |
Standard Value |
|
CaCl2 % ≥ |
94%min |
|
Basicity(according to Ca(OH)2) % ≤ |
0.25%max |
|
Alkali metal chloride(according to NaCl) % ≤ |
5%max |
|
Insoluble Part % |
0.15%max |
|
Fe % ≤ |
0.004%max |
|
MgCl2(Mg2+) % ≤ |
0.5%max |
|
PH |
6.0-11.0 |
|
CaSO4 % ≤ |
0.05%max |
Applications and Usage
In oil and gas drilling, anhydrous calcium chloride is used to prepare completion and workover fluids with density ranges of 1.30–1.50 g/cm³, helping control formation pressure. In construction, it accelerates cement setting in cold-weather concrete pouring at dosages of 1%–2% by cement weight. It also serves as a desiccant in gas drying units and as a raw material in chemical synthesis. For storage, keep bags sealed in a dry environment with relative humidity below 50%.
Product Advantages
Purity: ≥94%, verified per batch through titration analysis
Form: Flake 2–5 mm or pellet 1–4 mm, with fines content controlled
Packaging: 25 kg PP/PE bags or 1000 kg jumbo bags with inner liner
Solubility: Fully soluble in water, exothermic dissolution
Consistency: Production follows ISO 9001 quality management procedures
Documentation: COA, MSDS, and third-party inspection reports available
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.