1250mm Large Swing Lathe CW61125 with 6 Ton Load Capacity and 56 Feed Rate Options for Heavy Duty Flange Machining
1250mm Large Swing Lathe CW61125 | 6 Ton Load Capacity for Flange Machining
Summary
1250mm Large Swing Lathe CW61125 delivers 6 ton load capacity for heavy-duty flange and large-diameter component machining.
With 1250mm swing over bed, anti-crawling guide plates, and 56 feed rate options, this lathe ensures smooth, precise machining of large end faces and module threads. Its symmetrical headstock reduces thermal deformation, maintaining long-term accuracy.
Ideal for oil and gas, pipeline, and heavy machinery manufacturing clients requiring large flange components.
Features
- Integral cast bed with medium-frequency quenched guideways and anti-crawling guide plates, optimizing friction damping coefficient
- Symmetrical headstock with oil bath lubrication, minimizing spindle thermal deformation and ensuring consistent runout
- 1250mm swing over bed and 865mm swing over carriage, accommodating large flange and pipe end components
- 45 types of module threads and 38 types of diametral pitch threads, meeting diverse gear and flange machining needs
- Includes 4-jaw chuck, coolant device, and support tool box for immediate operational deployment
Technical Specifications
| Parameter | Specification |
|---|---|
| Max. swing over bed | 1250 mm |
| Max. swing over carriage | 865 mm |
| Max. workpiece length | 5000 |
| Max. Turning length | 4800 |
| Width of the bed guide rail | 755 mm |
| Spindle through-hole | ¢130 mm |
| Spindle hole font end taper | Metric 140 mm |
| Number of spindle forward rotation types | 21 |
| Spindle forward speed range | 3.15-315 rpm |
| Number of spindle reverse rotation types | 12 |
| Spindle reverse speed range | 3.5-291 rpm |
| Number of longitudinal and transverse feed rates of the tool post per spindle revolution | 56 |
| Range of feed rates of the tool post per spindle revolution-Longitudinal | 0.1-12 mm |
| Transverse (half of the longitudinal) | 0.05-6 mm |
| Upper tool post (1/4 of the longitudinal) | 0.025-3 mm |
| Metric threads | 44 types 1-120 mm |
| Inch threads | 31 types 28-1/4 T.P.I |
| Module threads | 45 types 0.5-60 mm |
| Dia. threads | 38 types 56-1/2 DP |
| Vertical distance from the spindle center to the tool mounting base surface | 48 mm |
| Tool cross-section | 45x45 mm |
| Tool post rotation angle | ±90° |
| Max. travel of the saddle | 4950 |
| Max. transverse travel of the lower tool post | 580 mm |
| Max. travel of the upper tool post | 300 mm |
| Travel of the tool post per division of the dial of the upper and lower tool posts | 0.05 mm |
| Rapid traverse speed of the tool post-Longitudinal/Transverse | 3740/1870 mm/min |
| Compound rest | 935 mm/min |
| Sleeve diameter | ¢160 mm |
| Sleeve travel | 300 mm |
| Center sleeve taper | MT.6 |
| Main motor power | 22 Kw |
| Main motor speed | 1460 rpm |
| Working pressure of the oil cylinder | 25 Kg/cm |
| Gear pump flow | 10 L/min |
| Gear pump speed | 1450 rpm |
| Max. Load of the lathe | 6 T |
Accessory Configurations
| Accessory | Configuration |
|---|---|
| 4-Jaw chuck | Included |
| Lightning device | Included |
| Coolant device | Included |
| Support tool box | Included |
| Operation manual | Included |
| Qualified instructions | Included |
| Packing list | Included |
Logistics & Support
Packing: Sea-worthy plywood case with waterproof lining, reinforced with steel bands for long-distance shipping
Warranty: Full 12 months warranty covering core mechanical systems (spindle, gearbox, bed guideways)
Technical Support: Lifetime free technical support via email, video call, or on-site service (extra charge applies for on-site visits)
Export Coverage: Exported to 30+ countries including Germany, Australia, Brazil, USA, and Southeast Asian markets
Customs Documentation: Complete export documentation provided, including CE certificate, commercial invoice, packing list, and bill of lading
FAQ
Q: What is the maximum swing over bed of CW61125 lathe?
A: 1250mm large swing lathe CW61125 has a 1250mm swing over bed, accommodating large flange and pipe end components.
Q: Can CW61125 machine module threads for gear components?
A: 1250mm large swing lathe CW61125 supports 45 types of module threads from 0.5mm to 60mm, ideal for gear component machining.
Q: How to reduce tool wear on CW61125 lathe?
A: Use the included coolant device and maintain correct feed rates on 1250mm large swing lathe CW61125 to minimize tool wear.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.