VMC-1890HL Machining Center Vertical Low Friction High Precision Large Size Worktable
VMC-1890HL Vertical Machining Center
- Full-series roller linear guideways for reduced motor burden
- High load capacity with low friction and high precision
- Large-size worktable for wide machining range
- Wide-field spindle motor for stronger cutting force
| Item | Unit | VMC-1890HL | |
|---|---|---|---|
| System | CNC System | - | FANUC |
| Rapid Speed | mm/min | 20000/20000/20000 | |
| Cutting Feed Speed | mm/min | 1-10000 | |
| 3-Axis Rated Power | Kw | 3.0/3.0/3.0 [Note①] | |
| 3-Axis Rated Torque | N.m | 36.0/36.0/36.0 [Note①] | |
| Worktable | T-Slot Dimensions | - | 7-22-125 |
| Worktable Dimensions | mm | 2000×900 | |
| Max Worktable Load | Kg | 2000 | |
| Travel | 3-Axis Travel | mm | 1800×900×800 |
| Distance from Spindle Nose to Worktable | mm | 150-950 | |
| Spindle | Spindle Power | Kw | 15-18.5 (Wide Range) |
| Max Spindle Speed | rpm | 6000(Belt)/8000(Direct Drive)/10000(Direct Drive) | |
| Spindle Taper | - | BT50 | |
| Transmission | Screw Diameter/Pitch | mm | Φ55D10/Φ55D10/Φ55D10 |
| Linear Rail Brand/Type/Width | - | PMI Roller 55mm/Roller 45mm/Roller 55mm [Note②] | |
| Number of Rails/Sliders | Pcs | 2-6/4-8/2-6 | |
| Tool Magazine | Tool Magazine Capacity | Pcs | 24 [Note③] |
| BT/BBT Pull Stud Angle | ° | 45° | |
| Max Tool Diameter | mm | Φ110(Full Magazine)/Φ210(Empty Adjacent Tool) | |
| Max Tool Length/Weight | mm/kg | 350/15 | |
| Tool Change Time | s | 2.2 | |
| Partial Configuration | Automatic Chip Removal | - | Rear Flushing |
| Automatic Lubrication System | - | Thin Oil Lubrication | |
| Electrical Cabinet Cooling | - | Heat Exchanger | |
| Accuracy | Positioning Accuracy (Full Travel) | mm | 0.012 |
| Repeat Positioning Accuracy (Full Travel) | mm | 0.008 | |
| Others | Air Supply Flow/Pressure | - | Flow 150(L/min)/Pressure 6Bar |
| Total Power | Kw | 40 | |
| Machine Weight | Kg | 14600 | |
| Machine Overall Dimensions (L×W×H) | mm | 4200×3200×3200 [Note④] | |
Mechanical manual tool magazine, rear-flush chip removal, spindle oil cooler, water gun, air gun, spindle air curtain, spindle ring spray, centralized lubrication, air source treatment, oil-water separation, heat exchanger, nitrogen balance
Mitsubishi/Syntec system, hollow screw, chain-type chip removal, grease lubrication, electrical cabinet air conditioner, 4-axis, 5-axis, column heightening, tool internal cooling, fixtures, clamps
※ The product appearance and configuration are subject to improvement with technological development, but will not be lower than current technical requirements. No separate notification will be given; the specific details shall be based on the technical agreement at the time of purchase.
Note①: The 3-axis power and torque are based on FANUC. For detailed information on Mitsubishi, Syntec and other systems, please consult the corresponding account manager.
Note②: In case of stock shortage, equivalent specifications (such as HIWIN, Rexroth, THK) will be used as substitutes. No separate notification will be given.
Note③: Optional 30-tool capacity for the tool magazine.
Note④: This dimension does not include the water tank (the width of the rear-flush water tank increases by 550mm) or the chain (the length of the chain increases by 1000mm). Select one option based on the actual configuration.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.