TAP-1100 Drilling And Tapping Center 36000mm/Min 48000mm/Min Rapid Speed
- High-speed spindle movement for highly effective processing
- Servo fast tool change system
- Silent guide rail with low friction and high sensitivity
- Large span herringbone columns resist high acceleration and deceleration impact
- Maximum tapping speed of 5000rpm for greatly improved efficiency
| Item | Unit | TAP-1100 | |
|---|---|---|---|
| System | CNC System | - | FANUC |
| Rapid Speed | mm/min | 36000/48000/48000 | |
| Cutting Feed Rate | mm/min | 1-10000 | |
| 3-Axis Rated Power | Kw | 2.7/2.7/2.7 [Note①] | |
| 3-Axis Rated Torque | N.m | 12.0/12.0/12.0 [Note①] | |
| Worktable | T-Slot Size | - | 3-14-125 |
| Worktable Size | mm | 1200*400 | |
| Max Worktable Load | Kg | 400 | |
| Stroke | 3-Axis Stroke | mm | 1100*400*300 |
| Spindle Nose to Worktable Distance | mm | 120-420 | |
| Spindle | Spindle Power | Kw | 3.7-5.5 |
| Max Spindle Speed | rpm | 20000 | |
| Spindle Taper | - | BT30 | |
| Transmission | Screw Diameter/Pitch | mm | Φ40D12/Φ32D16/Φ32D16 |
| Linear Rail Brand/Type/Width | - | PMI Ball 45mm/PMI Ball 30mm/PMI Roller 35mm [Note②] | |
| Guideway Quantity/Slider Quantity | Pcs | 2-6/4-8/2-4 | |
| Tool Magazine | Tool Capacity (Pocket) | Pcs | 21 |
| BT1/BBT Pull Stud Angle | ° | 45° | |
| Max Tool Diameter | mm | Φ60(Full Magazine)/Φ80(Empty Adjacent Tool) | |
| Max Tool Length/Weight | mm/kg | 200/2 | |
| Tool Change Time (Adjacent/Distant) | s | 0.35/1.3 | |
| Partial Configuration | Automatic Chip Removal | - | Rear Flush |
| Automatic Lubrication System | - | Thin Oil Lubrication | |
| Electrical Cabinet Cooling | - | Heat Exchanger | |
| Accuracy | Positioning Accuracy (Full Stroke) | mm | 0.008 |
| Repeat Positioning Accuracy (Full Stroke) | mm | 0.005 | |
| Others | Air Flow/Pressure | - | Flow 150L/(min)/Pressure(6Bar) |
| Total Power | Kw | 25 | |
| Machine Weight | Kg | 4500 | |
| Machine Overall Dimensions (L*W*H) | mm | 3200*2100*2200/3200*2320*2200 (with water tank) | |
Umbrella-shaped servo tool magazine, rear-flush chip removal, spindle oil cooler, water gun, air gun, spindle air curtain, spindle ring spray, centralized lubrication, air source treatment, oil-water separation, heat exchanger
Mitsubishi/Syntec system, direct-drive 24000rpm spindle, hollow screw, grease lubrication, electrical cabinet air conditioner, 4-axis, 5-axis, column heightening, tool internal cooling, fixtures, clamps
※ The product appearance and configuration are subject to improvement with technological development, but will not be lower than current technical requirements. No separate notification will be given; the specific details shall be based on the technical agreement at the time of purchase.
Note ①: The 3-axis power and torque are based on FANUC. For detailed information on Mitsubishi, Syntec and other systems, please consult the corresponding account manager.
Note ②: In case of stock shortage, equivalent specifications (such as HIWIN, Rexroth, THK) will be used as substitutes. No separate notification will be given.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.