VMC-1575HL Vertical Machining Centers Precision High Speed 3 Axis
- Integrated Optimization: Structural Strengthening of Moving Components
- Y-axis Lightening: Low-Center-of-Gravity Base Design
- Component Optimization: Higher Load-Bearing Capacity
- Cost Optimization Control: Achieve Extreme Cost-Effectiveness
| Item | Unit | VMC-1575HL | |
|---|---|---|---|
| System | CNC System | - | FANUC |
| Rapid Speed | mm/min | 24000/24000/24000 | |
| Cutting Feed Speed | mm/min | 1-10000 | |
| 3-Axis Rated Power | Kw | 3.0/3.0/3.0 [Note①] | |
| 3-Axis Rated Torque | N.m | 20.0/20.0/27.0 [Note①] | |
| Worktable | T-Slot Dimensions | - | 7-18-100 |
| Worktable Dimensions | mm | 1600×700 | |
| Max Worktable Load | Kg | 1000 | |
| Travel | 3-Axis Travel | mm | 1500×750×600 [Note②] |
| Distance from Spindle Nose to Worktable | mm | 150-750 | |
| Spindle | Spindle Power | Kw | 11-15 |
| Max Spindle Speed | rpm | 10000(Belt)/12000(Direct Drive)/15000(Direct Drive) | |
| Spindle Taper | - | BT40 [Note③] | |
| Transmission | Screw Diameter/Pitch | mm | Φ40D12/Φ40D12/Φ40D12 |
| Linear Rail Brand/Type/Width | - | PMI Roller 45mm/Roller 55mm/Roller 45mm [Note④] | |
| Number of Rails/Sliders | Pcs | 2-6/2-4/2-6 | |
| Tool Magazine | Tool Magazine Capacity | Pcs | 24 [Note⑤] |
| BT/BBT Pull Stud Angle | ° | 45° | |
| Max Tool Diameter | mm | Φ80(Full Magazine)/Φ150(Empty Adjacent Tool) | |
| Max Tool Length/Weight | mm/kg | 300/8 | |
| Tool Change Time | s | 1.3 | |
| Partial Configuration | Automatic Chip Removal | - | Rear Flushing |
| Automatic Lubrication System | - | Thin Oil Lubrication | |
| Electrical Cabinet Cooling | - | Heat Exchanger | |
| Accuracy | Positioning Accuracy (Full Travel) | mm | 0.008 |
| Repeat Positioning Accuracy (Full Travel) | mm | 0.006 | |
| Others | Air Supply Flow/Pressure | - | Flow 150(L/min)/Pressure(6Bar) |
| Total Power | Kw | 30 | |
| Machine Weight | Kg | 8300 | |
| Machine Overall Dimensions (L×W×H) | mm | 3800×2900×2900 [Note⑥] | |
Standard Configuration:
Mechanical manual tool magazine,rear-flush chip removal,spindle oil cooler,water gun,air gun,spindle air curtain,spindle ring spray,centralized lubrication,air source treatment,oil-water separation,heat exchanger,nitrogen balance
Optional Configuration:
Mitsubishi/Syntec system,hollow screw,chain-type chip removal,grease lubrication,electrical cabinet air conditioner,4-axis,5-axis,column heightening,tool internal cooling,fixtures,clamps
※ The product’s appearance and configuration will be updated with technological development (but will not be lower than current technical requirements). No separate notification will be given; specific details shall be subject to the technical agreement at the time of purchase.
Note ①: The 3-axis power and torque are based on FANUC. For detailed information on Mitsubishi, Syntec and other systems, please consult the corresponding account manager.
Note ②: This model is designed for export (considering container height), so the standard Z-axis travel is 600mm; domestic customers can opt for the model with 700mm Z-axis travel.
Note ③: Optional BT50-155 spindle.
Note ④: In case of stock shortage, equivalent specifications (e.g., HIWIN, Rexroth, THK) will be used as substitutes. No separate notification will be given.
Note ⑤: Optional 30-tool capacity for the tool magazine.
Note ⑥:This dimension does not include the water tank (the width of the rear-flush water tank increases by 550mm) or the chain (the length of the chain increases by 1000mm). Select one option based on the actual configuration.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.