VMC-1480HL Industrial Vertical Machining Centers High Precision
Product Features
- Low-Center-of-Gravity Chassis Design for Maximum Stability
- Y-Direction Four-Guide-Rail Design Effectively Resists Heavy-Load Deformation
- Meticulous Design and Elaborate Assembly
- Perfect Combination of Stability, High Rigidity and Precision
Technical Specifications
| Item | Unit | VMC-1480HL | |
|---|---|---|---|
| System | CNC System | - | FANUC |
| Rapid Speed | mm/min | 20000/20000/20000 | |
| Cutting Feed Speed | mm/min | 1-10000 | |
| 3-Axis Rated Power | Kw | 3.0/3.0/3.0 [Note①] | |
| 3-Axis Rated Torque | N.m | 27.0/27.0/27.0 [Note①] | |
| Worktable | T-Slot Dimensions | - | 5-18-125 |
| Worktable Dimensions | mm | 1500*800 | |
| Max Worktable Load | Kg | 1300 | |
| Travel | 3-Axis Travel | mm | 1400*800*700 |
| Distance from Spindle Nose to Worktable | mm | 150-850 | |
| Spindle | Spindle Power | Kw | 15-18.5 |
| Max Spindle Speed | rpm | 6000(Belt)/8000(Belt)/10000(Direct Drive) | |
| Spindle Taper | - | BT50 | |
| Transmission | Screw Diameter/Pitch | mm | Φ50D10/Φ50D10/Φ50D10 |
| Linear Rail Brand/Type/Width | - | PMI Roller 45mm/Roller 45mm/Roller 45mm [Note②,③] | |
| Number of Rails/Sliders | Pcs | 2-6/4-8/2-6 | |
| Tool Magazine | Tool Magazine Capacity | Pcs | 24 [Note④] |
| BT/BBT Pull Stud Angle | ° | 45° | |
| Max Tool Diameter | mm | Φ110(Full Magazine)/Φ210(Empty Adjacent Tool) | |
| Max Tool Length/Weight | mm/kg | 350/15 | |
| Tool Change Time | s | 2.2 | |
| Partial Configuration | Automatic Chip Removal | - | Rear Flushing |
| Automatic Lubrication System | - | Thin Oil Lubrication | |
| Electrical Cabinet Cooling | - | Heat Exchanger | |
| Accuracy | Positioning Accuracy (Full Travel) | mm | 0.01 |
| Repeat Positioning Accuracy (Full Travel) | mm | 0.008 | |
| Others | Air Supply Flow/Pressure | - | Flow 150(L/min)/Pressure(6Bar) |
| Total Power | Kw | 35 | |
| Machine Weight | Kg | 11500 | |
| Machine Overall Dimensions (L*W*H) | mm | 3900*2900*3000 [Note⑤] | |
Mechanical manual tool magazine,Rear-flush chip removal,Spindle oil cooler,Water gun,Air gun,Spindle air curtain,Spindle ring spray,Centralized lubrication,Air source treatment,Oil-water separation,Heat exchanger,Nitrogen balance
Mitsubishi/Syntec system,Hollow screw,Chain-type chip removal,Grease lubrication,Electrical cabinet air conditioner,4-axis,5-axis,Column heightening,Tool internal,coolingFixtures,Clamps
※ The product appearance and configuration are subject to improvement with technological development, but will not be lower than current technical requirements. No separate notification will be given; the specific details shall be based on the technical agreement at the time of purchase.
Note ①: The 3-axis power and torque are based on FANUC. For detailed information on Mitsubishi, Syntec and other systems, please consult the corresponding account manager.
Note ②: In case of stock shortage, equivalent specifications (such as HIWIN, Rexroth, THK) will be used as substitutes. No separate notification will be given.
Note ③: The width of X/Y/Z-axis linear rails can be optionally 55mm.
Note ④: Optional 30-tool capacity for the tool magazine.
Note ⑤: This dimension does not include the water tank (the width of the rear-flush water tank increases by 550mm) or the chain (the length of the chain increases by 1000mm). Select one option based on the actual configuration.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.