10hp Chiller Air Cooled Scroll Chiller Air Chiller for Injection Machine Water Chiller 10hp Process Chiller Extruder Chiller for IMM Chiller
10hp Chiller Air Cooled Scroll Chiller Air Chiller for Injection Machine Water Chiller 10hp Process Chiller Extruder Chiller for Mould Chiller
About Air-Cooled Chillers
Air-cooled scroll chillers have a cooling capacity range of 3 kW to 185 kW and are widely used in commercial and light industrial applications. They feature high-efficiency scroll compressors, known for quiet operation, durability, and excellent part-load performance. Key components include copper tubes with hydrophilic aluminum fins condensers, shell-and-tube or plate heat exchangers, and microprocessor-based controls. Water chillers are equipped with multiple protection functions and support communication protocols such as Modbus. These air chillers or water chiller offer reliable, energy-efficient, and low-maintenance operation, making them suitable for diverse cooling requirements.
10HP chiller is popular for injection machine and extruder machine.
10HP Air Cooled Scroll Chiller Specification:
|
Model |
BSK-10AD |
|
|---|---|---|
| Cooling capacity |
Kcal/h |
28,896 |
|
kW |
33.6 |
|
|
Input power |
kW |
9.87 |
|
Power supply |
3PH~380V/50HZ |
|
| Refrigerant |
Type |
R410a |
|
Type of control |
Capillary |
|
| Compressor |
Type |
Hermetic scroll type |
|
Power (kW) |
8.2 |
|
|
Condenser |
Type |
high-efficiency inner grooved copper tube and hydrophilic aluminum foil fins |
| Fan |
Power(kW) |
0.92 |
|
Total air flow(m³/h) |
10,000 |
|
| Evaporator |
Type |
Shell and tube |
|
Chilled water flow(m³/h) |
5 |
|
|
Built-in tank |
Tank volume(L) |
85 |
| Water pump |
Power(kW) |
0.75 |
|
Flow (m³/h) |
8 |
|
|
Lift(m) |
20 |
|
|
Inlet/outlet pipe |
Pipe diameter(inch) |
1-1/2 |
|
Safety protection |
compressor over temperature, over-current protection, high and low pressure protection, over -temperature protection ,flow switch protection,phase sequence or missing phase protection,exhaust overheating protection |
|
|
Net weight |
kg |
450 |
|
Dimension |
mm |
1500*780*1530 |
Water Chiller Features
- Environment-friendly refrigerant R407C, R410A, R404A, R134a, etc, which is no harm to the ozone layer.
- SCHNEIDER brand electric components ensure stable running of the machine.
- Imported stainless steel water pump featuring wide working range, low noise, reliable performance, no leaking and maintenance-free.
- High quality stainless steel tank and pipelines ensure pure water, and easy to clean and maintain.
Why do injection molding machines choose air-cooled chillers?
Principle: The fan drives air to flow through the condenser fins, dissipating heat into the air (no external water source required).
Advantages:
Easy installation: No need for cooling towers, pumps, or pipes, takes up less space, and is easy to move.
Wide application scenarios: Especially suitable for water-scarce areas, small and medium-sized workshops, such as small injection molding machine chillers.
Simple maintenance: No cooling water system, reducing problems like scale and pipe blockage.
Limitations:
Heat dissipation efficiency is greatly affected by ambient temperature: In summer when the temperature is high (ambient > 35°C), the cooling capacity may decrease by 10% to 20%.
Slightly higher noise: The fan operation generates some noise, not suitable for noise-sensitive places (such as laboratories, medical equipment).
Slightly higher energy consumption: Compared to water-cooled chillers, the power consumption is about 5% to 15% higher for the same cooling capacity.
Suitable applicants:
Small and medium-sized plastic machine, such as injection molding machine and extruder machine, laser equipment, small electroplating tanks, laboratory instruments, and temporary outdoor cooling needs.
If you need the detailed informations, just feel free to contact the whatsapp/wechat:+86 139 0260 8450.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.