High Hardness Epoxy Resin Grout Waterproof Modified Epoxy Grouting Liquid
High Permeability Modified Two Component Epoxy Resin Injection Grout Concrete Repair Grouting Material
The high permeability modified epoxy is a low viscosity, double liquid, low temperature hardened, hardened type of epoxy for injection repair. The product can be cured in water, curing time can be controlled, non-shrinkage after curing characteristics, mainly used for concrete structure crack leakage repair. It has excellent binding force for various structures, especially for the reinforcement of concrete leakage. With the aid of mechanical high-pressure injection, the product can fully achieve the effect of water-proof and structural reinforcement for the micro-cracks in the structure.
- Double liquid type, operating at room temperature. Material A and material B through the special double liquid epoxy grouting, machine mixing after pouring, the effect is better.
- The consolidated body strength is big, after the synthesis water does not disperse, the high bonding, after the curing toughness is high, does not shrink.
- Applicable to all concrete structure of the structure of the leakage water plugging and structural reinforcement.
- Reinforce, strengthen and prevent leakage of tunnels, subways and other underground structures.
- Reinforcement and reinforcement of defects such as honeycombs and cracks of building beams, columns and piles.
- Corrosion prevention, reinforcement, waterproofing and seepage prevention of dams, ports, docks, swimming pools, water towers, etc.
- It is suitable for the joint sealing of water pipelines and chemical pipelines.
- The preparation of grouting liquid: (according to the weight ratio of modified epoxy resin: curing agent=1:1), pour the curing agent into the modified epoxy resin, disperse and mix it evenly with manual or slow electric mixer, The stand-by time is about five minutes.
- After about 72 hours of curing, the exposed grouting nozzle can be cut off and restored with cement mortar.
- The prepared grouting solution should be used up all at once.
- The construction temperature should be above 5 degrees, and the construction site should be ventilated.
- The construction personnel must wear labor protection supplies and pay special attention to eye protection.
- Pay close attention to the pressure gauge when grouting to avoid bursting of the grouting pipe due to excessive pressure.
- After grouting, clean the pressure grouting machine and other construction tools with a cetone in time.
| Number | Test Items | Unit | Index |
|---|---|---|---|
| 1 | Density | G/Cm3 | >1.00 |
| 2 | Compressive Strength | Mpa | ≥ 70 |
| 3 | Tensile Strength | Mpa | ≥ 15 |
| 4 | Dry Bond Strength | Mpa | ≥ 4.0 |
| 5 | Wet Bonding Strength | Mpa | ≥ 3.0 |
| 6 | Impermeability Pressure | Mpa | ≥ 1.2 |
| 7 | Anti-seepage pressure ratio | % | ≥ 400 |
Modified epoxy chemical grouting fluid is a new chemical grouting reinforcing material with low viscosity and high strength. It is composed of modified epoxy resin and curing agent. Under the action of curing agent, it not only achieves the function of plugging, but also realizes the effect of reinforcement.
| Product Model | 1:1 Epoxy Resin Grouting Material | 4:1 Epoxy Resin Grouting Material |
|---|---|---|
| Product Proportion | main agent :10kg, curing agent :10kg | main agent :20kg, curing agent :5kg |
| Mixing Ratio | A:B = 1:1 | A:B = 4:1 |
| Slurry Density (G/Cm3) | 1.16 | 1.16±0.05 |
| Initial Viscosity(Mpa/S) | 190 | 30minutes(23℃ ±2℃ ) |
| Initial Hardening | 40minutes-2hours | 10hours |
| Completely Hardened | 3-7days | 3-7days |
| Operational Time | 40minutes | 40minutes |
| Viscosity | 100-500 MPA.S | 100-500 MPA.S |
| Tensile Strength | 20MPA | > 15MPA |
| Compressive Strength | 70MPA | ≥ 70MPA |
| Tensile Shear Strength | 8.5 | ≥ 8.0 |
| Bond Strength | 6.0MPA | |
| Impermeable Pressure | 1.5 | ≥ 1.2 |
| Permeation Pressure Ratio(%) | 450 | ≥ 400 |
Synthetic resin type mixed into a milky yellow liquid room temperature about 30 minutes to set.
Fast curing, mixed with light yellow! Initial setting at room temperature about 30 minutes
High permeability, mixed with a light red amber color! Initial setting at room temperature about 30 minutes
- Dense without bubbles, high strength, Normal temperature hardening, High adhesion, no shrinkage
- High intensity, hammer smashing constantly, Low viscosity and toughness
- Reinforcement and impermeability engineering waterproof, Solve the problem of water leakage in building cracks and reinforce building bodies
- Stored in clean, dry and sealed iron drums
- Transport according to regular product requirements, prevent rain, exposure, squeezing, and collision, and ensure that the packaging is intact.
- The product should be stored in a ventilated, dry and cool place, away from direct sunlight and rain. The storage temperature should not be higher than 40℃.
- Under normal storage conditions, the shelf life is 9 months.
Lihong Technology continues to increase its investment in advanced safety and environmental protection facilities. It is a second-level enterprise for production safety standardization, and many of its products have passed food-grade product certification. The company always adheres to the bottom line that quality is life, establishes and operates advanced quality management system and information management system, effectively improves product quality process control. Relying on advanced technology and equipment, it actively creates world-class product quality and corporate image.
The company has always insisted on leading high-quality development with technological innovation. The company currently has more than 30 high-end talents in the industry and has three R&D platforms: Jiangsu Technology R&D Center, Jiangsu Polyurethane New Material Engineering Technology Research Center, and Jiangsu Special Polyurethane New Material Engineering Research Center.
The company has 5 invention patents, 22 utility model patents, and more than 10 invention patents are being applied for. The company's research and development of specific functional flame-retardant polyether polyols has been identified as a key R&D project in Huai'an City.
Quality Control (Click to enter)
- Worried about maintaining a seamless supply chain? As proud manufacturers, we boast an expansive 8000 square meter warehouse, ensuring a robust and abundant supply capacity at all times.
- Can't receive prompt replies? Our dedicated team and AI customer service are at your service 24/7, ready to meticulously address every inquiry, ensuring you experience peace of mind and ease.
- Is finding product information proving difficult? Enjoy complimentary access to product samples, and comprehensive test certificates.
- Concerned about maintaining top-notch quality? We are committed to rigorous technical inspections before each sale, guaranteeing our quality meets the highest standards.
- Unfamiliar with the technology? Our team of expert consultants is on hand to offer you complimentary, cutting-edge technical advice.
- Is your forwarder unable to manage the goods? Our seasoned chemical export service team provides comprehensive services including declaration, transportation, insurance, and customs clearance, ensuring a smooth, worry-free journey from start to finish.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.