Factory Direct Automatic Labeling Machine Honey and Wine Bottles Label Printer Sticker Machine with Date Coding Print Function
Food and beverage brands live and die by what the customer sees on the shelf. A crooked label, a wrinkled corner, or a smeared barcode on a sauce bottle reads as low quality — and sends shoppers to the next brand. The YM610 square bottle labeling machines solves this at the source, applying crisp, perfectly aligned labels to sauce, juice, condiment, oil, and mineral-water bottles at up to 180 pieces per minute, with an accuracy of ±0.5 mm.
Food packaging lines have demands that generic labelers cannot meet. Bottles are often wet or cold from the filling stage. Condiment and syrup bottles carry nutrition panels, barcodes, and batch codes that must remain machine-readable. And hygiene regulations require surfaces that can be cleaned thoroughly between production runs.
Manual labeling fails all three tests: it is slow, its placement drifts, and it introduces handling errors. The YM610 addresses each point with purpose-built engineering.
Hygiene-first construction. The entire frame is SUS304 stainless steel, the standard food-contact material. It resists rust, resists the mild acids and oils common in food production, and wipes clean between batches. There are no painted surfaces to flake into the product zone.
Readable codes, every time. The ±0.5 mm placement accuracy means barcodes and QR codes land exactly where the scanner expects them. The elastic cotton idler wheel applies labels without creases, so printed information is never distorted.
Stable application on wet or heavy bottles. The servo-driven top-press conveyor holds every bottle against the bottom conveyor at 100% synchronized speed. A full 500 ml sauce bottle will not wobble or rotate during application.
- Sauces and condiments — soy sauce, ketchup, chili sauce, salad dressing bottles
- Beverages — juice, mineral water, energy drinks, bottled tea
- Edible oils — square and flat oil bottles with large front panels
- Honey, syrups, and spreads — glass and PET jars with wrap-around labels
- Dairy and specialty drinks — flat-panel bottles requiring precise front-and-back labels
| Parameter | Specification |
|---|---|
| Model | YM610 Labeling machines |
| Labeling modes | Single-side, multi-side |
| Capacity | up to 180 pcs/min |
| Labeling accuracy | ±0.5 mm |
| Label size (W × L) | W 5–300 mm, L 10–500 mm |
| Conveyor speed | ≤ 40 m/min |
| Label reel inner diameter | 76 mm |
| Label reel outer diameter | 360 mm max |
| Power supply | AC 220V, single phase, 50/60 Hz |
| Power consumption | 1300 W |
| Frame material | SUS304 stainless steel |
| Machine size (L×W×H) | 2500 × 1100 × 1750 mm |
Selling into supermarkets and export markets means your labels must satisfy a long list of requirements beyond looking good. Nutrition panels, ingredient lists, allergen declarations, country-of-origin marks, and barcodes must all be present, correctly positioned, and machine-readable. A label that is applied off-angle or with a crease can render a barcode unscannable at the checkout or fail an automated inspection gate — which means rejected pallets, chargebacks, and lost shelf placement.
The YM610 Bottle Labeling machine addresses this directly through its placement accuracy and application method. Because labels are applied progressively by the elastic cotton idler wheel rather than slapped on flat, printed information stays undistorted. Because placement is repeatable to ±0.5 mm, the barcode always lands inside the scanner's read zone, and the nutrition panel stays inside its designated area. And because the machine stores over 1,000 product recipes, the exact compliant label position for each SKU is locked in and reproduced on every run — no operator drift between batches.
This matters most for producers exporting to markets with strict food-labeling rules. A labeling machine that cannot hold a compliant position is not just a quality issue; it is a market-access issue. The YM610 Labeling machine turns label compliance from something you hope for into something the equipment guarantees.
The label stock and adhesive you run matter as much as the machine, especially in food production where bottles may be cold, damp, or lightly coated from the filling stage. Paper labels work well on dry, room-temperature containers but can wrinkle on condensation; film labels resist moisture and are the better choice for cold-filled beverages. The adhesive must bond to glass, PET, or HDPE at the line's temperature and humidity, and it should release cleanly if the label is ever removed.
The YM610 Labeling machine accommodates this variety without requiring mechanical changes. Its adjustable application pressure and the elastic cotton idler wheel conform to different label thicknesses and surfaces, and the label feed handles the full width range from 5 to 300 mm. This means a producer can switch from a paper sauce label to a film juice label within the same recipe system, rather than reserving the machine for a single material.
Discussing your label stock during the sample-testing stage is worthwhile: YIMUPACK's engineers can confirm how a given material runs on the machine and advise on settings that keep adhesion consistent across a full production run, avoiding the mid-batch label failures that disrupt food lines.
Q: Is the YM610 Labeling machine made from food-grade materials?
A: Yes. The frame and product-contact surfaces are built from SUS304 stainless steel, the standard material for food processing equipment. It resists corrosion from acidic foods and oils and is easy to clean and sanitize between production batches.
Q: Can the machine keep barcodes and nutrition panels scannable?
A: Absolutely. The ±0.5 mm placement accuracy and the crease-free application from the elastic cotton idler wheel ensure barcodes, QR codes, and nutrition facts panels are applied flat, straight, and fully readable by retail scanners and automated inspection systems.
Q: Can I label both round and square beverage bottles on one machine?
A: Yes. The YM610 handles square, flat, round, and conical containers, so a single machine can cover your entire product range — square juice bottles, round water bottles, and flat sauce bottles — without changing labelers.
Q: Can the machine add a production date or batch code?
A: Yes, as an optional add-on. A hot-stamp or thermal-transfer code printer, or a non-contact ink-jet printer, can be integrated to print batch numbers, production dates, and expiry dates inline during labeling.
Q: Does YIMUPACK have experience with food exporters?
A: Yes. YIMUPACK has over 20 years in the labeling-machine industry and has supplied food and beverage producers in more than 80 countries, with over 10,000 projects completed. The team understands the labeling standards required for international food retail.
Q: Are CE and SGS certificates available for food-export compliance?
A: Yes. Every YM610 Labeling machine ships with CE and SGS certification documents, which support customs clearance and regulatory compliance for food lines in the EU, North America, and other regulated markets.
Q: Can I test the Labeling machine with my own sauce or juice bottles before ordering?
A: Yes. YIMUPACK recommends sending samples to its Shanghai engineering center, where R&D engineers will configure and run the labeler on your actual bottles, complete a 24-hour test, and confirm labeling quality before shipment.
Q: What is the typical delivery time for a food labeling line?
A: Standard-configuration machines ship in 15–25 working days after order confirmation. Customized food-line configurations typically take 25–35 working days, depending on the specific requirements.
Request a labeling test with your own sauce, juice, or condiment bottles — contact YIMUPACK for a quote and sample-run details.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.