D16 3D Flexible Welding Table for Rapid Tooling and Jig Setup
Our D16 3D Flexible Welding Table for Rapid Tooling and Jig Setup is a full 5-sided modular grid fixture system tailored for modern multi-variety metal fabrication. Designed with dense Φ16 locating holes and standard 50×50mm grid spacing, this welding platform supports complete X/Y/Z three-dimensional clamping on both the top surface and four vertical side walls.
All matching clamps, locating blocks and quick lock pins are fully interchangeable, allowing operators to rebuild brand-new jig layouts within 10 to 30 minutes instead of waiting days for custom dedicated tooling. Manufactured from stress-relieved HT300 cast iron or lightweight Q355 nitrided steel, it maintains long-term dimensional stability with tight positioning tolerance, perfectly suited for thin sheet metal, aluminum frames, tubular workpieces and automated robot welding cells.
| Item | Specification Details |
|---|---|
| Standard Hole Parameter | Φ16mm locating holes, 50×50mm dense grid pitch |
| Hole Layout | 5-sided full hole design (top + 4 vertical side walls) |
| Working Height (Standard) | 700mm; Custom height: 800mm / 900mm available |
| Optional Material Grade 1 | HT300 Cast Iron (0 Precision Grade) Flatness: ≤0.05mm/1000mm Position tolerance: ±0.03mm Nitride depth: 0.12-0.2mm, Hardness HV850-1000 |
| Optional Material Grade 2 | Q355 Nitrided Steel (1 General Grade) Flatness: ≤0.10mm/1000mm Position tolerance: ±0.05mm Lighter weight, cost-effective |
| Standard Stock Dimensions | 1000×500mm 1000×800mm 1500×1000mm 2000×1000mm 2400×1200mm Custom non-standard sizes supported |
| Load Capacity | Even distributed load: 3-5 T/㎡ Max single-point concentrated load: 2 T |
| Surface Treatment | High temp annealing + vibration stress relief + full shot blasting + plasma ion nitriding Non-working sides: High-temperature anti-rust paint |
| Standard Included Accessories | Heavy adjustable leveling feet (±50mm adjustment range) |
| Optional Extra Attachments | Brake casters, lifting rings, height raising frames, tool hangers, dust-proof hole plugs, complete D16 clamp kits, pneumatic clamping sets, robot adapter plates |
| Certification | CE, ISO factory inspection test reports |
- Step 1: Stress Elimination (Anti-Warp Core Process)
All raw blanks go through high-temperature annealing + vibration aging to remove internal casting/welding stress. No natural aging required, effectively avoid table bending and precision loss after years of workshop use. - Step 2: Full Shot Blasting
Whole table shot blast to remove oxide skin, burr and rust, enhance adhesion of nitriding layer for longer service life. - Step 3: Plasma Ion Nitriding (Wear & Splash Resistant)
Nitride layer withstand 350℃ high temperature, welding spatter will not form permanent pits
Anti-rust performance fits coastal high humidity factories
5-10 times higher wear resistance than untreated steel plate
Optional upgrade: High-temperature anti-spatter coating for easier daily cleaning - Step 4: Protective Coating
Non-working side walls sprayed with black high-temperature anti-rust paint to prevent workshop moisture corrosion.
- Dramatically Reduce Jig Setup Time
Replace weeks of custom fixture machining with 10-30 minutes modular reconfiguration, accelerate new product trial order delivery and win more customer orders. - High-Dense D16 Grid For Precision Micro Adjustment
50×50mm hole pitch provides 4 times more clamping points than D28 welding tables. Perfect for thin sheets, tiny aluminum brackets and complex curved tubular parts with strict tolerance requirements. - Full 5-Sided 3D Clamping Solution
Top surface + four vertical walls all with standard D16 holes. Realize X/Y/Z three-dimensional multi-angle positioning, avoid repeated secondary clamping and dimension error accumulation. - Long Service Life
Double stress relief + deep ion nitriding effectively prevent table deformation and hole expansion. The 3d welding table maintains original precision for 8-10 years under normal use, far better than low-cost domestic tables without vibration aging treatment. - Wide Compatibility
100% interchangeable with international mainstream brand D16 accessories; support multi-table splicing to form large continuous welding production lines, freely match robots, positioners and automated equipment.
Heavy thick steel plates, large construction machinery frames, oversized structural parts with ultra-heavy clamping demand - select D28 100mm grid welding table for heavy load.
- Main table body: 2-year warranty (exclude man-made hammer strike and arc burning damage)
- Standard clamps, quick lock pins and other wearing parts: 1-year free replacement
- Nitride wear layer: 2-year quality guarantee, free repair or replacement if mass hole expansion occurs without human damage
Tell us your workpiece size, welding type (manual / robot), required table dimension and target material version.
Our professional engineer team will send free fixture layout drawing and best quotation within 24 hours.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.