Marble Cutting Purification Flocculant High Molecular Weight Anionic Polyacrylamide Grade AA6518

Price Negotiable

Price: USD1800

MOQ: 1 MT

Delivery Time: 7-`5 WORKING DAYS

Brand: OYI POLYMER

Product Description

Egypt Marble Cutting Purification Flocculant High Molecular Weight Anionic Polyacrylamide Grade AA6518

OYIFLOC Polyacrylamide is a water-soluble polymer available as a solid powder, with varying molecular weights and charge densities. This versatile product comes in anionic, cationic, and nonionic forms and is commonly used to enhance water viscosity or promote flocculation for rapid settlement of fine suspended solids in water.

Technical Specifications

Cost-effective with low dosage requirements.
Quickly dissolves in water for easy application.
Non-corrosive at recommended dosages; efficient and economical at low concentrations.
Replaces the need for alum and ferric salts when used as a primary coagulant.
Reduces sludge volume in dewatering processes.

Technical Specifications

Item	Standard
Appearance	White or yellowish granular
Charge degree (%)	medium to high
Mesh size (mesh)	20-80
Bulk Density, kg/m³	600-800
Molecular Weight	Very High
Recommend Dissolution Ratio	0.1%--0.5%
PH value at 0.1% solution at 25℃	4-9
Insoluble (%)	≤0.3
Remaining Monomer (%)	≤0.17
Dissolution Time (min)	≤90
Shelf Life	24 months

Primary Applications

Instruction of polyacrylamide

Before using,dissolve polyacrylamide with tap water at a ratio of 0.1%-0.5% and stir until fully dissolved.
Do not use iron materials to stir or hold PAM, because the reaction performance of PAM will decrease when it encounters iron.
The dosage needs to be calculated through laboratory pilot tests, with the aim of achieving the aggregation of flocs and presenting the phenomenon of sludge-water separation.
It is better to use up the prepared PAM solution within 24 hours.
Products should be stored in unopened package in a dry atmosphere at temperature no higher than 35℃.

Package of polyacrylamide