Non Ionic PAM NPAM Textile Printing And Sizing Thickener Mining Water Recovery N830

Price Negotiable

Price: USD1200

MOQ: 1 MT

Delivery Time: 7-5 WORKING DAYS

Brand: OYI POLYMER

Product Description

Non Ionic PAM NPAM Textile Printing And Sizing Thickener Mining Water Recovery N830

OYIFLOC N830 is a type of polyacrylamide with a large molecular weight and is non-ionic. The powder is supplied in a granular form that flows freely. This chemical is very useful in several industries, such as wastewater treatment, oil drilling, paper manufacturing, textile production, and mining.
One of the key benefits of OYIFLOC N830 is its versatility. It can be used for various applications within each of these industries.
For example, in wastewater treatment, it can help to neutralize pollutants and remove solid waste.
In oil drilling, it can be used as a friction reducer and thickener of drilling mud.
In paper manufacturing, it can improve the paper's strength and reduce its water absorption.
In textile production, it can improve dye absorption and help to reduce shrinking. And in mining, it can help to separate minerals from their ores.
In addition to its versatility, OYIFLOC N830 is also known for its effectiveness. It effectively addresses a range of challenges in each of these industries. Whether dealing with wastewater that needs to be treated, minerals that need to be extracted, or paper that needs to be strengthened, OYIFLOC N830 can help.

Technical Specifications

Item	Standard
Appearance	White or yellowish granular
Cation degree of charge (%)	80%
Mesh size (mesh)	20-80
Bulk Density, kg/m³	600-800
Molecular Weight	Medium to Very High
Recommend Dissolution Ratio	0.1%--0.5%
PH value at 0.1% solution at 25℃	4-9
Insoluble (%)	≤0.3
Remaining Monomer (%)	≤0.17
Dissolution Time (min)	≤90
Shelf Life	24 months

Primary Effects

Instruction of polyacrylamide

Before using,dissolve polyacrylamide with tap water at a ratio of 0.1%-0.5% and stir until fully dissolved.
Do not use iron materials to stir or hold PAM, because the reaction performance of PAM will decrease when it encounters iron.
The dosage needs to be calculated through laboratory pilot tests, with the aim of achieving the aggregation of flocs and presenting the phenomenon of sludge-water separation.
It is better to use up the prepared PAM solution within 24 hours.
Products should be stored in unopened package in a dry atmosphere at temperature no higher than 35℃.

Package of polyacrylamide