High Molecular Weight Mining Flocculants Nonionic Polyacrylamide Grade N303
Solving the pain points of mine wastewater treatment
The core challenges of mine water treatment are high suspended solids, heavy metal residues, and high operating costs.
Our solution is through:
- PAC efficient electrical neutralization: rapid coagulation of colloidal particles, removal of more than 90% of suspended solids
- PAM enhanced bridging effect: long molecular chains capture fine particles, increase floc density by 50%, and double the sedimentation rate
- Intelligent compounding technology: dynamically match water quality changes (such as the case of our SOUTH AFRICA customers‘ mining area:
PAC 25mg/L + PAM 0.3mg/L → effluent turbidity <10 NTU
Why choose US?
- Customized formula: provide anionic/cationic/nonionic PAM and PAC with different contents
- Global verification: products are used in coal mines in Central Asia, gold mines in Africa, copper mines in South America and so on
- Water Samples testing → Laboratory test to determine the best ratio
- Free sample → Free 1kg sample
- Long-term technical support → 15 years of stable operation guarantee
- After-sales service quick response → within 12 hours
Customer Value: From Cost Consumption to Profit Transformation
|
Indicators |
Traditional solution |
Our PAC+PAM solution |
|
Cost of treating water |
0.4--0.5 USD /ton |
0.23-0.27 USD /ton (↓40%) |
|
Sludge disposal fee |
17 USD/ton |
10 USD/ton (↓42%) |
|
Stability of reaching the standard |
Large fluctuation |
90% can meet the national standard |
|
Resource benefits |
None |
Recycled water ≥90% reuse + by-product sales |
Instruction of polyacrylamide
- Before using,dissolve polyacrylamide with tap water at a ratio of 0.1%-0.5% and stir until fully dissolved.
- Do not use iron materials to stir or hold PAM, because the reaction performance of PAM will decrease when it encounters iron.
- The dosage needs to be calculated through laboratory pilot tests, with the aim of achieving the aggregation of flocs and presenting the phenomenon of sludge-water separation.
- It is better to use up the prepared PAM solution within 24 hours.
- Products should be stored in unopened package in a dry atmosphere at temperature no higher than 35℃.
Package of polyacrylamide
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.