CPAM Polyacrylamide Powder for Wastewater Treatment in Southeast Asia Flocculant for Palm Oil Textile and Sugar Industry
Price:
USD1500-2500
MOQ:
1 MT
Delivery Time:
7-`5 WORKING DAYS
Brand:
OYI POLYMER
Product Description
CPAM Polyacrylamide Powder for Wastewater Treatment in Southeast Asia Flocculant for Palm Oil Textile and Sugar Industry
Cationic Polyacrylamide (CPAM) produced by Vanzon Water is a high-performance water-soluble polymer with a positive charge density. Engineered for superior interaction with negatively charged particles, CPAM excels in sludge dewatering, wastewater clarification, and organic matter removal. Its tailored molecular structure ensures rapid flocculation, reduced sludge volume, and compliance with stringent environmental standards.
OYIFLOC Cationic Polyacrylamide Specifications
| Appearance | White Powder |
| Mass fraction of polymer content | ≥89% |
| Charge degree: | 5-80% |
| Molecular weight | 8-15 million |
| Mass fraction of acrylamide monomer | ≤0.25% |
| Dissolving time (1g/L) | ≤60min |
| Mass fraction of water-insoluble substances | ≤0.2% |
Main Applications
- Livestock farm wastewater treatment
- Pig feed mills wastewater clarification
- Sludge dewatering and thickening
- Organic-rich industrial wastewater treatment
- Agricultural and animal husbandry sewage systems
Product Advantages
- Economical and achieve good effects at low dosage.
- Significantly improve the sludge production efficiency and reduce the moisture content of sludge cake
- lncrease the settling rate of suspended solids during the solid-liquid separation in sewage treatment process.
- Highly effective in a wide PH range(2-9), it is capable of treating waste water and sludge under weak acidic condition.
Product Forms
Anionic Polymer Flocculant Powder |
Anionic Polymer Flocculant Emulsion |
|
|
|
|
|
Usage Instructions
Preparation:
Dissolve CPAM in clean water to make a 0.1%–0.3% aqueous solution. Stir slowly to avoid clumping.
Application:
Add the prepared solution evenly into the wastewater system.
Dosage:
Typical dosage is 1–10 ppm, depending on wastewater characteristics.
Mixing:
Allow proper mixing and reaction time for optimal floc formation.
How to use OYIFLOC Anionic Polymer Flocculant?
-
Prepare stock solution if using powder: dissolve 0.1-0.2 g/L in water (adjust per lab test). Stir for 30–60 minutes until fully hydrated.
-
Liquid product: dilute to recommended working concentration per technical sheet.
-
Typical dosage range: 0.1–10 mg/L (vary by application and water quality). Perform jar test to determine optimal dose.
-
Add flocculant after coagulation stage or directly to influent stream; mix gently then allow settling. Adjust pH and dose based on jar test results.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
WUXI OYI ENVIRONMENTAL TECHNOLOGY CO LTD
Location
NO.01, YIXING ECONOMIC DEVELOPMENT ZONE, JIANGSU, CHINA, 214200
Contact Person
Doris