Cationic Flocculant used in Paper Making Sludge Thickening Agent Grade C985H
Price:
USD1500-2500
MOQ:
1 MT
Delivery Time:
7-`5 WORKING DAYS
Brand:
OYI POLYMER
Product Description
Cationic Flocculant used in Paper Making Sludge Thickening Agent Grade C985H
- Cationic polyacrylamide powder(CPAM) could be used in industrial and urban wastewater treatment as flocculant and sludge dewatering agent.
- The treatment of industrial wastewater or the mixture of industrial and urban wastewater normally use middle/low electric density and middle/high molecular weight product.
- The treatment of urban sewage use middle/high electric density, midde/high molecular weight product.The treatment of sludge need use high electric density PAM for better effect.
- CPAM could remove the organic part from the wasted water effectively after concentration and flotation process.
OYIFLOC Cationic Polyacrylamide Specifications
| Appearance | White Powder |
| Mass fraction of polymer content | ≥89% |
| Charge degree: | 50-80% |
| Molecular weight | 8-15 million |
| Mass fraction of acrylamide monomer | ≤0.25% |
| Dissolving time (1g/L) | ≤60min |
| Mass fraction of water-insoluble substances | ≤0.2% |
Product Advantages
- Economical and achieve good effects at low dosage.
- Significantly improve the sludge production efficiency and reduce the moisture content of sludge cake
- lncrease the settling rate of suspended solids during the solid-liquid separation in sewage treatment process.
- Highly effective in a wide PH range(2-9), it is capable of treating waste water and sludge under weak acidic condition.
Product Forms
Cationic Polymer Flocculant Powder |
Cationic Polymer Flocculant Emulsion |
|
|
|
|
|
How to use OYIFLOC Cationic Polymer Flocculant?
-
Prepare stock solution if using powder: dissolve 0.1-0.2 g/L in water (adjust per lab test). Stir for 30–60 minutes until fully hydrated.
-
Liquid product: dilute to recommended working concentration per technical sheet.
-
Typical dosage range: 0.1–10 mg/L (vary by application and water quality). Perform jar test to determine optimal dose.
-
Add flocculant after coagulation stage or directly to influent stream; mix gently then allow settling. Adjust pH and dose based on jar test results.
FAQ
1 .Q: How can we get a sample for lab test?
A: Yes, pls contact us to describe your usage, we will match you with most suitable and cost-effective type.
2. Q: How can we get an offical quotation?
A: Pls tell us the quantity of products you need, the incoterm you need(EXW, FOB ,FCA or CIF), if for CIF, Pls also share your destination sea port, so that we can check the sea freight and then make an offical quotation for you.
3. Q: can you customize the package for us?
A: yes, of course, you can send your current package to us for printing, if you do not have a package version currently, you can provide your logo, and describe your demand to us, we can do the design for you.
4.Q: Is there a minimum quantity order?
A: Yes, usually the MOQ is one FCL, but in order to support more customers, we can accept MOQ 1 ton for trial order.
5. Q: Can you provide after-sales service?
A:For foreign customers, we provide technical and after-sales services combining online (remote) and offline (on-site).
A: Yes, pls contact us to describe your usage, we will match you with most suitable and cost-effective type.
2. Q: How can we get an offical quotation?
A: Pls tell us the quantity of products you need, the incoterm you need(EXW, FOB ,FCA or CIF), if for CIF, Pls also share your destination sea port, so that we can check the sea freight and then make an offical quotation for you.
3. Q: can you customize the package for us?
A: yes, of course, you can send your current package to us for printing, if you do not have a package version currently, you can provide your logo, and describe your demand to us, we can do the design for you.
4.Q: Is there a minimum quantity order?
A: Yes, usually the MOQ is one FCL, but in order to support more customers, we can accept MOQ 1 ton for trial order.
5. Q: Can you provide after-sales service?
A:For foreign customers, we provide technical and after-sales services combining online (remote) and offline (on-site).
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
WUXI OYI ENVIRONMENTAL TECHNOLOGY CO LTD
Location
NO.01, YIXING ECONOMIC DEVELOPMENT ZONE, JIANGSU, CHINA, 214200
Contact Person
Doris