Polyamine 50% Used as Primary Coagulant and Flocculant AM503

• Polyamine is  is mainly used to synthesize high molecular water treatment complex. lt often works asdecolourant , flocculant, Electric neutralization, adsorbent , clarifier.It is especially effective with charged particles while inorganic flocculant are ineffective to it .
• It can be blended with inorganic polymers in water purification for better performance, such aspolyaluminium chloride (PAc) and aluminum chlorohydrate (ACH) 

• In the treatment of municipal domestic sewage and industrial wastewater, it is used as flocculant for solid-liquid separation and filter or centrifugal assistant for sludge dewatering.Especially the oil removal effect in oily wastewater.
• In papermaking, it can be used as a conductive polymer of paper, as a medium charge agent and color fixing.
  High charge same as C573  and FL2749 
• Polyamine is used as a biocide in cooling water treatment, which can kill or inhibit the growth of various bacteria and algae. It is an effective slime control agent.
• Polyamine is used as anti swelling agent, sewage treatment flocculant, electroplating additive, anti fog agent and anti-static agent on glass surface in oil exploitation.
• In the post-treatment of textile dyeing and finishing, polyamine with low molecular weight can improve the wet solid of dyeing without affect the light fastness.
• Use as mud additive in Drilling industry
• Water clarification
• Belt filter, centrifuge and screw press dewatering
• Demulsification
• Dissolved air flotation
• Filtration

Paper Industry:
Wet-end retention and drainage aid
Enhances fiber and filler retention
Improves AKD/ASA sizing efficiency
Can partially replace cationic starch or PAM to reduce cost

Wastewater Treatment:
Primary coagulant for paper, textile, dyeing and industrial wastewater
Effective in color removal, COD reduction and solid–liquid separation
Works alone or together with PAC/PAM

Other Industries:
Mining, oilfield produced water, leather, chemical wastewater
Intermediate for polyamide resin and wet-strength agent production

• When used alone, it should be diluted to the concentration of 0.5%-0.05%.
• When used to treat different source water or waste water, the dosage is based on the turbidity andthe concent solid content ration of the water. The most economical dosage is based on the trial. Thedosing spot and the mixing velocity should be carefully decided to guarantee that the chemical can bemixed evenly with the other chemicals in the water and the flocs can not be broken.
• It is better to dose the product continuously.

• 200 L plastic drums
• 1000 L IBC containers