Abrasion Resistant Permeable Running Track Porous PU Running Track Durable Low Maintenance

Key Advantages: Extra abrasion resistance | Self‑cleaning pores | 10‑year structural warranty | Resists UV, oil spills, and chewing gum | Simple annual sweep

This variant of the breathable porous track is formulated for extreme durability in public spaces with continuous use. The top layer uses oversized EPDM granules (2.5–4mm) and a high‑strength PU binder that resists wear from running spikes, bicycle tyres, and even light maintenance vehicles. The open pores are sized to prevent clogging by dust – natural rain and wind keep them clear.

Designed for city parks, urban greenways, stadium concourses, and any track expected to handle >500 users per day without visible degradation.

• Coarser top granules – more rubber mass to wear down

• High‑solids binder – resists cracking from freeze‑thaw or heavy loads

• Anti‑clog pore geometry – pores are funnel‑shaped, particles fall through

• Optional extra 1mm wear layer – add 20% more life for high‑abuse zones

No expensive resurfacing, no special cleaners.

• Central park jogging loops (urban)

• School tracks used daily by 800+ students

•   training base fitness tracks

• Stadium warm‑up areas for multiple sports

*Centennial Park, Sydney – 2.4km public running trail installed in 2015, used by ~1,200 runners/day. Inspected 2025: top wear <1.5mm, still fully porous, no blistering. Annual cost: $0.08 per m².*

• 5‑year full material warranty (covers fading, granule loss, binder failure)

• 10‑year structural integrity (no delamination or base separation)

• 24h claim response – replacement material shipped free within 7 days if defect confirmed.

Q: Do dogs or bikes damage it?
→ No. The surface is puncture‑resistant. Bike tyres cause no wear if used occasionally. For dedicated bike lanes we recommend a separate layer.

Q: Can I powerwash it?
→ Yes, with a fan nozzle and ≤2000 PSI. Do not use a rotating turbo nozzle.