Compact RF Transformer CND-tek JXDBT3F-434PT-S226-2S for Frequency Mixer and Broadband Applications
Product Overview
This RF Transformer, model JXDBT3F-434PT-S226-2S, is designed for Frequency Mixer applications, CATV, TVB-D, HomePlug AV MAC and PHY, and MII/RMII host interfaces. It incorporates common mode chokes to prevent signal interference and improve the signal-to-noise ratio. The transformer also provides isolation, enhancing transmitter and receiver circuitry balance while reducing common mode noise and EMI. Materials used are UL94V-0 recognized and meet IEC 695-2-2 standards. Designed for compact devices, it converts between unbalanced and balanced signals in tuner circuits for terrestrial digital broadcast. Windings utilize paired or triple wires for uniformity, and base pins allow direct PCB mounting. It is ideal for double-balanced mixers, broadband transformers, transistors, and impedance conversion, with options for different inductance values and Q specifications.
Product Attributes
- Brand: JXD Electronics
- Origin: Shenzhen magnetic Lianda Electronics Co., LTD
- Certifications: UL94V-0 recognized, IEC 695-2-2 (needle flame test)
- Compliance: RoHS (2002/95/EC)
Technical Specifications
| Specification | Details |
|---|---|
| Product Name | RF Transformer |
| Customer P/N | Not specified |
| JXD P/N | JXDBT3F-434PT-S226-2S |
| Issued Date | 2022-10-11 |
| Revision | A |
| Application Areas | Frequency Mixer, CATV, TVB-D, HomePlug AV MAC and PHY, MII/RMII host interface, integrated memory, insulation, terrestrial digital broadcast tuner circuits |
| Material Compliance | UL94V-0 recognized, IEC 695-2-2 (needle flame test) |
| Dimensions | Unit: mm (Refer to Mechanicals section for drawing) |
| Electrical Specifications @ 25 | 3~200MHz, Z=75 ohms |
| Turns (Pin1~Pin2) | 3Ts |
| Turns (Pin2~Pin3) | 3Ts |
| Turns (Pin4~Pin6) | 6Ts |
| Insertion Loss | 3MHz~200MHz @ 2.0dB Max |
| Impedance Ratio | 75 : 75 |
| Input Return Loss | 3MHz~200MHz @ 6.0dB Min |
| Operating Temperature | -40 to +85 |
| Storage Temperature | -55 to 100 |
| RF Power | 0.25W |
| Plastic Base Material | PM9820 |
| Ferrite Core Material | RID Core Ni-Zn uiac1000 |
| Copper Wire Diameter | 0.10mm /0UEW 155 |
| Silicon Varnish | 1EVA-V1380FC |
| Solder Bar Material | Sn/Cu: 99.3/0.7 |
| Package Type | Carrier Tape & Reel |
| Carrier Tape Material | Black Anti-Static Polystyrene |
| Packing Quantity | 2000pcs/Reel, 3Reels/Middle Carton, 5 Middle Cartons/Big Carton (30000pcs/Big Carton) |
| Reliability Testing - Temperature Rise Test | 40 MAX (t) with allowed DC current for 4 hours |
| Reliability Testing - Solder Heat Resistance | Preheat: 150 100s Max; Solder Temp: 2605; Dip Time: 10s Max |
| Reliability Testing - Vibration Test (Low Frequency) | Amplitude: 1.5mm; Frequency: 10~55~10Hz/1Min; Direction: X,Y,Z; Duration: 2Hrs/X,Y,Z |
| Reliability Testing - Shock Test | Dropped 10 times from 1M height onto 3cm wooden board |
| Reliability Testing - Solderability Test | >90% terminal electrode covered with solder; Preheat: 150 120s; Solder Temp: 2455; Dip Time: 10s MAX |
| Reliability Testing - Component Adhesion (Push Test) | 1.5Kg MIN |
| Reliability Testing - Component Adhesion (Pull Test) | 1.5Kg MIN |
| Reliability Testing - Flexture Strength | Forces applied should not damage dielectric; Bend substrate by 2mm and return |
| Reliability Testing - Resistance to Solvent Test | Withstand 6 minutes of alcohol without case deformation, appearance change, or marking alteration |
| Reliability Testing - Climatic Test (Temperature Characteristic) | -40 ~ +85 |
| Reliability Testing - Climatic Test (Humidity Test) | 602, 90%~95%RH, Max rated current, 962Hrs |
| Reliability Testing - Climatic Test (Low Temperature Storage) | -402, 962Hrs, 10 cycles, 30min per cycle |
| Reliability Testing - Climatic Test (Thermal Shock Test) | Temp1: -452, Temp2: 1252, 10 cycles, 30min per cycle |
| Reliability Testing - High Temperature Storage | 1252, 962Hrs, with max rated current |
| Reliability Testing - Life Test (High Temperature Load Life Test) | 1252, 50012Hrs, with allowed DC current |
| Reliability Testing - Life Test (Humidity Load Life Test) | 602, 90~95% RH, 50012Hr, with allowed DC current |
| Hazardous Substance Compliance | Fulfills 2002/95/EC-RoHS restrictive list (Cadmium, Mercury, Lead, Hexavalent Chromium, PBB, PBDE) |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.