Durable electrical connectors BOOMELE Boom Precision Elec 1.25T-6P with tin plated copper terminals

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification covers the 1.25mm Pitch Bar Connectors (SMT) series. These connectors are designed for applications requiring reliable electrical connections with specific performance characteristics under various environmental conditions.

Product Attributes

Main Body Material: LCP
Terminal Material: Copper
Terminal Surface Plating: Tin-plated

Technical Specifications

Item	Specification	Requirement
3. RATINGS
Rated Voltage (MAX)		50V
Rated Current (MAX) [AC (virtual value)/DC]		1.0A
Ambient Temperature Range		-25 +85
4. PERFORMANCE
4.1 Electrical Performance
Contact Resistance	Mate applicable and measure by dry circuit, 20mV MAX, 10mA.	20 m MAX
Insulation Resistance	Mate applicable and apply 500V DC between adjacent terminal or ground.	500M MIN
Dielectric Strength	Mate applicable and apply 500V AC (virtual value) for 1 minute between adjacent terminal or ground.	No Breakdown
4.2 Mechanical Performance
Insertion and Withdrawal Force	Insert and extract applicable at the speed rate of 253mm/minute.	Insertion: 5 * n (N) MAX Withdrawal: 0.3 * n (N) MIN
Terminal Retention Force	Pull the terminal at the speed rate of 253mm per minute.	10 N MIN
4.3 Environmental Performance and Others
Repeated Insertion and Withdrawal	Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute.	Contact Resistance: 60 m MAX
Temperature Rise	Carrying rated current load. (UL 498)	Temperature Rise: 30 MAX
Appearance		No Damage
Contact Resistance		60 m MAX
Vibration	DC 1mA under energized condition; vibration along X, Y, Z axes; amplitude 1.5mm; frequency 10-55-10Hz/min; duration 2 hours.	Discontinuity: 1 ms MAX. Appearance: No Damage
Shock	DC 1mA under energized condition; 490m/s {50G} shock in 6 directions perpendicular to each other; 3 times each.	Discontinuity: 1 ms MAX. Appearance: No Damage
Heat Resistance	852, 96 hours.	Contact Resistance: 60 m MAX Appearance: No Damage
Cold Resistance	-402, 96 hours.	Contact Resistance: 60 m MAX Appearance: No Damage
Dielectric Strength		Must meet 4.1.3
Humidity	Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours.	Insulation Resistance: 100 M MIN Appearance: No Damage
Temperature Cycling	5 cycles of: a) -553 30 minutes, b) 852 30 minutes.	Contact Resistance: 60 m MAX Appearance: No Damage, Corrosion
Salt Spray	484 hours exposure to a salt spray from the 51% solution at 352.	Contact Resistance: 60 m MAX
SO2 Gas Resistance	24 hours exposure to 505ppm SO2 gas at 402.	Contact Resistance: 60 m MAX Appearance: No Damage
NH3 Gas Resistance	40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.	Contact Resistance: 60 m MAX
Solder ability	Soldering Time: 20.5 sec. Soldering Temperature: 2355 0.2 mm from terminal tip	Solder Wetting: 95% or more area
Resistance to Soldering Heat	Soldering Time: 305 sec. Soldering Temperature: 2605	Appearance: No Damage, Deformation