BOOMELE Boom Precision Elec 1.25T12P bar connectors providing insulation resistance and electrical performance

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification covers the 1.25mm Pitch Bar Connectors (SMT) series, designed for electrical interconnections. These connectors are suitable for applications requiring reliable performance under various environmental conditions, including vibration, shock, and humidity.

Product Attributes

Product Name: Bar Connectors
Material (Main body): LCP
Material (Terminal): Copper
Terminal Plating: Tin plated

Technical Specifications

Item	Specification/Requirement	Test Condition
Ratings
Rated Voltage (MAX)	50V
Rated Current (MAX)	1.0A [AC (virtual value) / DC]
Ambient Temperature Range	-25 +85
Performance - Electrical Performance
Contact Resistance	20 m MAX	Mate applicable and measure by dry circuit, 20mV MAX, 10mA.
Insulation Resistance	500 M MIN	Mate applicable and apply 500V DC between adjacent terminal or ground.
Dielectric Strength	No Breakdown	Mate applicable and apply 500V AC (virtual value) for 1 minute between adjacent terminal or ground.
Performance - Mechanical Performance
Insertion Force	5 * n (N) MAX	Insert and extract applicable at the speed rate of 253mm/minute.
Withdrawal Force	0.3 * n (N) MIN	Insert and extract applicable at the speed rate of 253mm/minute.
Terminal Retention Force	10 N MIN	Pull the terminal at the speed rate of 253mm per minute.
Performance - Environmental Performance and Others
Repeated Insertion and Withdrawal (Contact Resistance)	60 m MAX	Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute.
Temperature Rise (Rated Current)	30 MAX	Carrying rated current load. (UL 498)
Vibration (Discontinuity)	1 ms MAX	Amplitude: 1.5mm P-P, Sweep time: 10-55-10Hz in 1 minute, Duration: 2 hours in each X.Y.Z. axes, under DC 1mA.
Shock (Discontinuity)	1 ms MAX	490m/s {50G}, 3 strokes in each X.Y.Z. axes, under DC 1mA.
Heat Resistance (Contact Resistance)	60 m MAX	852, 96 hours.
Heat Resistance (Dielectric Strength)	Must meet 4.1.3	852, 96 hours.
Cold Resistance (Contact Resistance)	60 m MAX	-402, 96 hours.
Humidity (Insulation Resistance)	100 M MIN	Temperature: 402, Relative Humidity: 90-95%, Duration: 96 Hours.
Temperature Cycling (Contact Resistance)	60 m MAX	5 cycles of: a) -553 30 minutes, b) 852 30 minutes.
Salt Spray (Contact Resistance)	60 m MAX	484 hours exposure to a salt spray from the 51% solution at 352.
SO2 Gas (Contact Resistance)	60 m MAX	24 hours exposure to 505ppm SO2 gas at 402.
NH3 Gas (Contact Resistance)	60 m MAX	40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.
Solderability (Solder Wetting)	95%	Soldering Time: 20.5 sec, Soldering Temperature: 2355, 0.2 mm from terminal tip.
Resistance to Soldering Heat (Appearance)	No Damage, Deformation	Soldering Time: 305 sec, Soldering Temperature: 2605.
Product Models
Part Number	1.25T-nPWB