Flexible Printed Circuit Connector FPC ZIF R A SMT 0.5mm Pitch 2.0mm Height CAX CAX AFC07 45SCB H2.0
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This FPC ZIF R/A SMT connector series, with a 0.5mm pitch and a height of 2.0mm, is designed for SMT (Surface Mount Technology) applications. It features a right-angle (R/A) upper type connection for Flexible Printed Circuits (FPC). The connectors are suitable for a rated voltage of 50V AC and a current rating of 0.4A DC, operating within a temperature range of -25C to +85C. They are available in both small batch tube packaging and recommended bulk reel packaging.
Product Attributes
- Brand: DAET
- Manufacturer: (ZHE JIANG CHUANG DU ELECTRONICS CO.,LTD)
- Housing Material: LCP (White, UL94V-0 Flammability Rating)
- Actuator Material: PA6T (Black, UL94V-0 Flammability Rating)
- Terminal Material: Phosphor Bronze
- Fitting Nail Material: Brass
- Pitch: 0.5mm
- Height: 2.0mm
- Type: FPC ZIF R/A Upper Type SMT Connector
- Packaging: Small batch available in tube, recommended for bulk in reel.
Technical Specifications
| Item | Specification | Test Condition |
|---|---|---|
| Rating | ||
| Operating Voltage (Max.) | 50V AC | |
| Current Rating (Max.) | 0.4A DC | (*Including temperature rise due to current) |
| Operating Temperature Range | -25C ~ +85C | |
| Operating Humidity Range | Relative humidity 90% max. | |
| Storage Temperature Range | -10C ~ +50C | |
| Storage Humidity Range | Relative humidity 90% max. | |
| Performance - Electrical | ||
| Contact Resistance | 40 m Max. | Mate applicable FPC and measure by dry circuit, 20mV Max, 10mA. (EIA-364-23) |
| Insulation Resistance | 500 M Min. | Mate applicable FPC and apply 500V DC between adjacent terminal or ground. (EIA-364-21) |
| Dielectric Strength | No Breakdown | Mate applicable FPC, apply 250V AC(rms) for 1 minute between adjacent terminal or ground. (EIA-364-20) |
| Performance - Mechanical | ||
| FPC Retention Force | Pos.x 0.3N Min. | Insert the actuator, pull the FPC at a rate of 253mm per minute. |
| Terminal Retention Force | 3N Min. | Apply axial pull out force at the rate of 253 mm/minute on the terminal assembled in the housing. |
| Fitting Nail Retention Force | 1N Min. | Apply axial pull out force at the rate of 253 mm/minute on the Fitting Nail assembled in the housing. |
| Performance - Environmental and Others | ||
| Durability | Contact Resistance: 60m Max. | Insert and withdraw actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. |
| Temperature Rise | 30C Max. | Mate applicable FPC and measure the temperature rise of contact when the maximum AC rated current is passed. (EIA-364-70 METHOD 2) |
| Vibration | Appearance: No Damage Contact Resistance: 60m Max. Discontinuity: 1sec Max. | Mate connectors and subject to vibration conditions (Amplitude: 1.5mm P-P, Frequency: 10~55~10 Hz in 1 minute, Duration: 2 hours in each of X,Y,Z axes), passing DC 1mA. (EIA-364-28 Condition I) |
| Shock | Appearance: No Damage Contact Resistance: 60m Max. Discontinuity: 1sec Max. | Mate applicable FPC and subject to shock conditions (Peak value: 490m/s2 {50G}), 3 times for each of 6 directions along 3 axes, passing DC 1mA. (EIA-364-27, test condition A) |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and expose to 852C for 96 hours, then condition at ambient room conditions for 1-2 hours. |
| Cold Resistance | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and expose to -402C for 96 hours, then condition at ambient room conditions for 1-2 hours. |
| Humidity | Appearance: No Damage Contact Resistance: 60m Max. Dielectric Strength: No Breakdown Insulation Resistance: 40 M Min. | Mate applicable FPC and expose to 602C, 90-95% RH for 96 hours, then condition at ambient room conditions for 1-2 hours. |
| Temperature Cycling | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and subject to 5 cycles of -553C (30 min) and +853C (30 min), then condition at ambient room conditions for 1-2 hours. |
| Salt Spray | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and expose to 51% NaCl solution at 352C for 484 hours, then rinse with clean water and dry. |
| SO2 Gas | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and expose to 505 ppm SO2 gas at 402C for 24 hours. |
| NH3 Gas | Appearance: No Damage Contact Resistance: 60m Max. | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solderability | Solder Wetting: 75% of immersed area must show no voids, pin holes. Appearance: No Damage | Tip of solder tails and fitting nails into molten solder (2455C) up to 0.1mm from housing bottom for 30.5 seconds. |
| Resistance to Soldering Heat (Soldering Iron) | Appearance: No Damage | 0.3mm from terminal tip and fitting nail tip. Soldering time: 3 seconds Max. Solder temperature: 370~400C. |
Infrared Reflow Condition
Refer to the temperature graph provided for infrared reflow soldering.
Temperature Graph:
250 230 200 150 100 50 0 (C) (60sec) (60~90sec) (30sec) 230C MIN./ 2040sec 250C MAX.(Peak Temp) 3sec. or less Start (Pre-Heat 150C MAX.) Time(seconds)
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina