FPC Easyon Right Angle SMT Connector CAX CAXA0112XCBH20 Suitable for Various Electronic Applications

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

The CAX-A01-XCB-H2.0 series is a 1.0mm pitch, 2.0mm height FPC Easy-on Right Angle SMT connector. Designed for reliability and ease of use, this connector features a flip-cover mechanism for simple FPC insertion and removal. It is suitable for various electronic applications requiring compact and secure FPC connections.

Product Attributes

Brand: DAET
Manufacturer: ZHE JIANG CHUANG DU ELECTRONICS CO.,LTD
Housing Material: LCP (UL94V-0)
Actuator Material: LCP (UL94V-0)
Terminal Material: Phosphor Bronze
Fitting Nail Material: Phosphor Bronze
Housing Color: White
Actuator Color: Black
Packaging: Tube packaging (small quantities), Reel packaging (bulk quantities)

Technical Specifications

Item	Specification	Test Condition
General Specifications
Pitch	1.0mm
Height	2.0mm
Type	FPC Easy-on R/A D/C Type SMT Connector
Rating
Operating Voltage (Max.)	50V AC
Current Rating (Max.)	0.5A DC	Including terminal temperature rise
Operating Temperature Range	-55C to +85C
Operating Humidity Range	90% RH Max.
Storage Temperature Range	-10C to +50C
Storage Humidity Range	90% RH Max.
Electrical Performance
Contact Resistance	40 m Max.	Mate applicable FPC, 20mV Max, 10mA (EIA-364-23)
Insulation Resistance	500 M Min.	Mate applicable FPC, 500V DC between adjacent terminals or ground (EIA-364-21)
Dielectric Strength	No Breakdown	Mate applicable FPC, 250V AC (rms) for 1 minute between adjacent terminals or ground (EIA-364-20)
Mechanical Performance
FPC Retention Force	0.30N Min.	Insert actuator, pull FPC at 253mm/min
Terminal Retention Force	3N Min.	Axial pull out force at 253mm/min
Fitting Nail Retention Force	1.0N Min.	Axial pull out force at 253mm/min
Environmental Performance and Others
Durability	Contact Resistance: 60 m Max.	Insert/withdraw actuator up to 20 cycles at
Temperature Rise	30C Max.	Measure contact point temperature rise when passing max rated current (EIA-364-70 Method 2)
Vibration Resistance	Appearance: No Damage; Contact Resistance: 60 m Max.; Discontinuity: 1sec Max.	DC 1mA, 1.5mm displacement, 10-55-10 Hz for 2 hours in X,Y,Z axes (EIA-364-28 Condition I)
Shock Resistance	Appearance: No Damage; Contact Resistance: 60 m Max.; Discontinuity: 1sec Max.	490m/s {50G} shock for 3 times in 6 directions (EIA-364-27, test condition A)
Heat Resistance	Appearance: No Damage; Contact Resistance: 60 m Max.	Mate FPC, expose to 852C for 96 hours, then condition at room temp 1-2 hours
Cold Resistance	Appearance: No Damage; Contact Resistance: 60 m Max.	Mate FPC, expose to -402C for 96 hours, then condition at room temp 1-2 hours
Humidity Resistance	Appearance: No Damage; Contact Resistance: 60 m Max.; Insulation Resistance: 30 M Min.; Dielectric Strength: No Breakdown	Mate FPC, expose to 602C, 90-95% RH for 96 hours, then condition at room temp 1-2 hours
Temperature Cycling	Appearance: No Damage; Contact Resistance: 60 m Max.	5 cycles of -553C (30 min) to +853C (30 min), then condition at room temp 1-2 hours
Salt Spray	Appearance: No Damage; Contact Resistance: 60 m Max.	51% NaCl solution, 352C for 484 hours, then wash and dry
SO2 Gas	Appearance: No Damage; Contact Resistance: 60 m Max.	505 ppm SO2 gas, 402C for 24 hours
NH3 Gas	Appearance: No Damage; Contact Resistance: 60 m Max.	40 minutes exposure to NH3 gas from 28% Ammonia solution
Solderability	Solder Wetting: 75% Min. wetting area, no voids/pinholes.	Immersion at 2455C for 30.5 seconds, 0.1mm from housing bottom
Resistance to Soldering Heat	Appearance: No Damage.	Soldering iron method: 0.2mm from tip, 5 sec Max., 370-400C
Infrared Reflow Condition
Temperature Profile	Peak Temp: 250C Max. (3 sec or less); Pre-Heat: 150C Max.; Time above 230C: 20-40 sec	(See graph in source document)

Operation Instructions

Step 1: Use thumb or forefinger to lift the top cover upwards.

Step 2: Insert FPC with conductive side down, parallel to the connector.

Step 3: Lightly press the top cover and rotate down to secure, ensuring FPC is fully inserted without movement.

Step 4: To withdraw FPC, carefully lift the top cover and slide out the FPC.

Warnings

Rotation angle of the cover should not exceed 120 degrees.
Excessive FPC insertion angle may cause poor conductivity.
Upward pulling force on FPC should not exceed 0.04N/pin max.
Avoid using excessive force when opening the connector cover to prevent contact with terminals.