0.5mm Pitch FPC Easy-on Back-flip Right-Angle SMT Connector CAX CAX-AFC24-20XIB-H2.0 with LCP Housing
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This specification covers the 0.5mm Pitch H=2.0 FPC Easy-on Back-flip Right-Angle SMT connector series. Designed for reliable electrical connections, these connectors feature a durable LCP housing and phosphor bronze terminals. They are suitable for applications requiring a 50V AC maximum operating voltage and 0.5A DC current rating, operating within a temperature range of -55C to +85C.
Product Attributes
- Brand: DAET
- Origin: ZHE JIANG CHUANG DU ELECTRONICS CO.,LTD
- Housing Material: LCP (White, UL94V-0)
- Actuator Material: LCP (Black, UL94V-0)
- Terminal Material: Phosphor Bronze
- Fitting Nail Material: Phosphor Bronze
- Pitch: 0.5mm
- Height: 2.0mm
- Type: FPC Easy-on Back-flip R/A Type1 SMT Connector
Technical Specifications
| Item | Specifications | Test Condition |
|---|---|---|
| Rating | ||
| Operating Voltage (Max.) | 50V AC | |
| Current Rating (Max.) | 0.5A DC | *Including terminal temperature rise. |
| Operating Temperature range | -55C ~ +85C | |
| Operating humidity range | 90% max. Relative humidity | |
| Storage temperature range | -10C ~ +50C | |
| Storage humidity range | 90% max. Relative humidity | |
| Electrical Performance | ||
| Contact Resistance | 40 m Max. | Mate applicable FPC and measure by dry circuit, 20mV Max, 10mA. (EIA-364-23) |
| Insulation Resistance | 500 M Min. | Mate applicable FPC and apply 500V DC between adjacent terminal or ground. (EIA-364-21) |
| Dielectric Strength | No Breakdown | Mate applicable FPC, apply 250V AC(rms) for 1 minute between adjacent terminal or ground. (EIA-364-20) |
| Mechanical Performance | ||
| FPC Retention Force | Pos.x 0.30N Min. | Insert the actuator, pull the FPC at a rate of 253mm per minute. |
| Terminal Retention Force | 3N Min. | Apply axial pull out force at the rate of 253 mm/minute on the terminal assembled in the housing. |
| Fitting Nail Retention Force | 1.0N Min. | Apply axial pull out force at the rate of 253 mm/minute on the Fitting Nail assembled in the housing. |
| Environmental Performance and Others | ||
| Durability | Contact Resistance: 60m Max. | Insert and withdraw actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. |
| Temperature Rise | 30C Max. | Mate applicable FPC and measure the temperature rise of contact when the maximum AC rated current is passed. (EIA-364-70 METHOD 2) |
| Vibration | Appearance: No Damage Contact Resistance: 60m Max. Discontinuity: 1sec Max. | Mate connectors and subject to the following vibration conditions, for period of 2 hours in each of 3 mutually perpendicular axes, passing DC 1mA during the test. Amplitude : 1.5mm P-P Frequency : 10~55~10 Hz in 1 minute. Duration : 2 hours in each of X,Y,Z axes. (EIA-364-28 Condition I) |
| Shock | Appearance: No Damage Contact Resistance: 60m Max. Discontinuity: 1sec Max. | Mate applicable FPC and subject to the following shock conditions. 3 times of shocks shall be applied for each 6 directions along 3 mutually perpendicular axes, passing DC 1 mA current during the test. (Total of 18 shocks) Peak value : 490m/s {50G} (EIA-364-27, test condition A) |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and expose to 852C for 96 hours. Condition at ambient room conditions for 1 to 2 hours afterwards. |
| Cold Resistance | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and expose to -402C for 96 hours. Condition at ambient room conditions for 1 to 2 hours afterwards. |
| Humidity | Appearance: No Damage Contact Resistance: 60m Max. Dielectric Strength: No Breakdown Insulation Resistance: 30 M Min. | Mate applicable FPC and expose to 60 2C, relative humidity 90 to 95% for 96 hours. Condition at ambient room conditions for 1 to 2 hours afterwards. |
| Temperature Cycling | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and subject to 5 cycles of -553C for 30 minutes and +853C for 30 minutes. Condition at ambient room conditions for 1 to 2 hours afterwards. |
| Salt Spray | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and expose to NaCl solution (5 1%) at 352C for 484 hours. Rinse with clean water and dry afterwards. |
| SO2 Gas | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and expose to 50 5 ppm SO2 gas at 40 2C for 24 hours. |
| NH3 Gas | Appearance: No Damage Contact Resistance: 60m Max. | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solderability | Solder Wetting: 75% of immersed area must show no voids, pinholes. Resistance to Soldering Heat: (Soldering iron method) Appearance: No Damage | Solder temperature: 2455C, Immersion time: 30.5 seconds. (Soldering iron method) 0.2mm from terminal tip and fitting nail tip. Soldering time : 5 seconds Max. Solder temperature : 370~400C |
Infrared Reflow Condition
Temperature on board pattern side:
- Pre-Heat: Max 150C
- Time: 60sec
- Soak: 230C MIN./ 20~40sec
- Time: 60~90sec
- Peak Temp: 250C MAX.
- Time: 3sec or less
Instructions for Use
Step 1: Insert the FPC with the actuator opened.
Step 2: FPC is totally inserted and not moved. Press the actuator and rotate down to secure.
Step 3: Lift the actuator, withdraw FPC.
Warnings:
- The rotation angle cannot be greater than 90 degrees.
- The pressure applied should be average and on the center of the actuator.
- Lift the actuator at the center.
- PCB board flatness must be within 0.1mm max.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina