Surface Mount 0.5mm Pitch H2.0 FPC Connector Right Angle SMT Type CAX CAX C01 22XCB H2.0 for Connection
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This specification covers the 0.5mm Pitch H=2.0 FPC Easy-on R/A SMT type connectors series. Designed for reliable connection with Flexible Printed Circuits (FPC), these connectors feature a right-angle surface mount design with a low profile (H=2.0mm). They are suitable for applications requiring a compact and secure FPC interface.
Product Attributes
- Brand: CHUANG DU ELECTRONICS
- Origin: ZHE JIANG CHUANG DU ELECTRONICS CO.,LTD
- Housing Material: LCP (White)
- Actuator Material: LCP (Black)
- Terminal Material: Phosphor Bronze
- Fitting Nail Material: Phosphor Bronze
- Flammability Rating: UL94V-0
- Connector Type: 0.5mm Pitch H=2.0 FPC Easy-on R/A SMT
- Mounting Type: Surface Mount (SMT)
- Configuration: Right-Angle (R/A)
Technical Specifications
| Item | Specification | Test Condition |
|---|---|---|
| Ratings | ||
| Operating Voltage (Max.) | 50V AC | |
| Current Rating (Max.) | 0.5A DC | *Including terminal temperature rise. |
| Operating Temperature Range | -55C ~ +85C | |
| Operating Humidity Range | 90% RH Max. | Relative humidity |
| Storage Temperature Range | -10C ~ +50C | |
| Storage Humidity Range | 90% RH Max. | Relative humidity |
| Electrical Performance | ||
| Contact Resistance | 30 m Max. | Mate applicable FPC, test voltage 20mV, current 10mA. (EIA-364-23) |
| Insulation Resistance | 500 M Min. | Mate applicable FPC, apply 500V DC between adjacent terminals or ground. (EIA-364-21) |
| Dielectric Strength | No Breakdown | Mate applicable FPC, apply 250V AC(rms) for 1 minute between adjacent terminals or ground. (EIA-364-20) |
| Mechanical Performance | ||
| FPC Retention Force | 0.30N Min. | Insert actuator, pull FPC at 253mm/min. (Pos.x) |
| Terminal Retention Force | 3N Min. | Apply axial pull out force on terminal assembled in housing at 253mm/min. |
| Fitting Nail Retention Force | 1.0N Min. | Apply axial pull out force on Fitting Nail assembled in housing at 253mm/min. |
| Environmental Performance and Others | ||
| Durability | Contact Resistance: 60m Max. | Insert and withdraw actuator up to 20 cycles at |
| Temperature Rise | 30C Max. | Measure temperature rise at contact point when maximum rated current is passed. (EIA-364-70 METHOD 2) |
| Vibration | Appearance: No Damage; Contact Resistance: 60m Max.; Discontinuity: 1sec Max. | Mate connectors, DC 1mA, 1.5mm displacement, 10~55~10 Hz for 2 hours in each X,Y,Z axis. (EIA-364-28 Condition I) |
| Shock | Appearance: No Damage; Contact Resistance: 60m Max.; Discontinuity: 1sec Max. | Mate FPC, DC 1mA, 490m/s {50G} for 3 times in each of 6 directions. (EIA-364-27, test condition A) |
| Heat Resistance | Appearance: No Damage; Contact Resistance: 60m Max. | Mate FPC, expose to 852C for 96 hours, then condition at room temp. |
| Cold Resistance | Appearance: No Damage; Contact Resistance: 60m Max. | Mate FPC, expose to -402C for 96 hours, then condition at room temp. |
| Humidity | Appearance: No Damage; Contact Resistance: 60m Max.; Dielectric Strength: No Breakdown; Insulation Resistance: 30 M Min. | Mate FPC, expose to 602C, 90-95% RH for 96 hours, then condition at room temp. |
| Temperature Cycling | Appearance: No Damage; Contact Resistance: 60m Max. | Mate FPC, subject to 5 cycles of -553C (30min) and +853C (30min), then condition at room temp. |
| Salt Spray | Appearance: No Damage; Contact Resistance: 60m Max. | Mate FPC, expose to 51% NaCl solution at 352C for 484 hours, then rinse and dry. |
| SO2 Gas | Appearance: No Damage; Contact Resistance: 60m Max. | Mate FPC, expose to 505 ppm SO2 gas at 402C for 24 hours. |
| NH3 Gas | Appearance: No Damage; Contact Resistance: 60m Max. | 40 minutes exposure to NH3 gas from 28% Ammonia solution. |
| Solderability | Solder Wetting: 75% of immersed area must show no voids, pin holes. | Dip conductive terminals in molten solder (2455C) for 30.5 seconds. |
| Resistance to Soldering Heat (Soldering Iron) | Appearance: No Damage | Soldering iron method: 0.2mm from terminal tip, 5 seconds Max., 370~400C. |
Infrared Reflow Condition
Temperature Condition Graph (Temperature on Board Pattern Side)
| Stage | Temperature Range | Time |
|---|---|---|
| Pre-Heat | Start (150C MAX.) | (60sec) |
| 230C MIN. / 20~40sec | (60~90sec) | |
| Reflow | 250C MAX. (Peak Temp) | 3sec. or less |
(Graph visualization is not possible in text format, but the data points are represented above.)
Instructions upon usage of ZIF Easy-On Type
Step 1: Use the thumb or the forefinger, raise the top cover up.
Step 2: FPC gets along with conductivity down. The parallel one inserts it in the connector.
Step 3: Press the top cover lightly and rotate down to make a reservation, until FPC is totally inserted and not moved.
Step 4: Lift the top cover carefully, withdraw FPC.
Warnings:
- The whirling angle can't be greater than 120 degrees.
- When the angle that FPC inserts in is askew, it may cause electrical discontinuity.
- The strength of dragging upwards don't exceed 0.04N/pin max.
- While opening the connector and lifting and covering, don't use excessive strength and avoid touching the terminals.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina