FPC Easy On Right Angle SMT Connector 0.5mm Pitch with 50V AC Voltage Rating CAX CAX AFC01 09XCB H2 0
Product Overview
This product is a 0.5mm Pitch H=2.0 FPC Easy-on Right-Angle SMT type connector series. Designed for reliable connection with Flexible Printed Circuits (FPCs), it features a robust construction with LCP housing and actuator, and phosphor bronze terminals and fitting nails. The connector is rated for a maximum operating voltage of 50V AC and a current rating of 0.5A DC, with an operating temperature range of -55C to +85C. It is suitable for various applications requiring a secure and easy-to-use FPC connection, with specific operational instructions provided for insertion and withdrawal.
Product Attributes
- Brand: ZHE JIANG CHUANG DU ELECTRONICS CO.,LTD
- Origin: China
- Housing Material: LCP (Flammability Rating: UL94V-0)
- Actuator Material: LCP (Flammability Rating: UL94V-0)
- Terminal Material: Phosphor Bronze
- Fitting Nail Material: Phosphor Bronze
- Housing Color: White
- Actuator Color: Black
- Pitch: 0.5mm
- Height: 2.0mm
- Connector Type: FPC Easy-on R/A SMT
Technical Specifications
| Category | Item | Specifications |
|---|---|---|
| Rating | Operating Voltage (Max.) | 50V AC |
| Current Rating (Max.) | 0.5A DC | |
| Operating Temperature Range | -55C ~ +85C | |
| Electrical Performance | Contact Resistance | 30 m Max. |
| Insulation Resistance | 500 M Min. | |
| Mechanical Performance | FPC Retention Force | Pos.x 0.30N Min. |
| Environmental Performance | Durability | 20 cycles |
| Soldering | Solder Wetting | 75% of immersed area must show no voids, pin holes. |
Operational Instructions
Instruction upon usage of zif esay on type
- Step 1: Use the thumb or the forefinger, raise the top cover up.
- Step 2: FPC gets along with conductivity down. The parallel one inserts it in the connector.
- Step 3: Press the top cover lightly and rotate down to make a reservation, until FPC is totally inserted and not moved.
- Step 4: Lift the top cover carefully, withdraw FPC.
Warnings:
- The whirling angle can't be greater than 120 degrees.
- When the angle that FPC inserts in is askew, it may cause electrical discontinuity.
- The strength of dragging upwards don't exceed 0.04N/pin max.
- While opening the connector top cover, don't use excessive strength and avoid touching the terminals.
Infrared Reflow Condition
Temperature Condition Graph (Temperature on Board Pattern Side):
Start (Pre-Heat 150C MAX.)
Time(seconds): (60sec) (60~90sec) (30sec)
Temperature (C): 0, 50, 100, 150, 200, 230, 250
Specifications: 230C MIN./ 2040sec, 250C MAX. (Peak Temp) 3sec. or less
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.