SMT Mounting Easy On Connector CAX CAX-AFA01-10XCG-H2.0 1.0mm Pitch and 2.0mm Height for Connections
Product Overview
This specification covers the 1.0mm Pitch H=2.0 FPC Easy-on R/A SMT type connectors series. Designed for reliable electrical connections, these connectors offer a compact 1.0mm pitch and a height of 2.0mm, suitable for surface mount technology (SMT) applications. The easy-on design facilitates simplified FPC insertion and removal, enhancing usability. They are manufactured by ZHE JIANG CHUANG DU ELECTRONICS CO.,LTD.
Product Attributes
- Brand: ZHE JIANG CHUANG DU ELECTRONICS CO.,LTD
- Origin: China
- Housing Material: LCP (White, UL94V-0 Flammability Rating)
- Actuator Material: LCP (Black, UL94V-0 Flammability Rating)
- Terminal Material: Phosphor Bronze
- Fitting Nail Material: Phosphor Bronze
- Pitch: 1.0mm
- Height: 2.0mm
- Mounting Type: SMT
- Type: Easy-on R/A D/C Type1
- Packaging: Tube packaging available for small quantities, Reel packaging recommended for bulk.
Technical Specifications
| Item | Specifications |
|---|---|
| Operating Voltage (Max.) | 50V AC |
| Current Rating (Max.) | 0.5A DC |
| Operating Temperature Range | -55C to +85C |
| Operating Humidity Range | 90% RH Max. |
| Storage Temperature Range | -10C to +50C |
| Storage Humidity Range | 90% RH Max. |
| Electrical Performance: Contact Resistance | 40 m Max. (Mate applicable FPC, 20mV Max, 10mA) |
| Electrical Performance: Insulation Resistance | 500 M Min. (Mate applicable FPC, 500V DC between adjacent terminals/ground) |
| Electrical Performance: Dielectric Strength | No Breakdown (Mate applicable FPC, 250V AC(rms) for 1 minute between adjacent terminals/ground) |
| Mechanical Performance: FPC Retention Force | Pos.x 0.30N Min. (Insert actuator, pull FPC at 253mm/min) |
| Mechanical Performance: Terminal Retention Force | 3N Min. (Axial pull out force at 253mm/min) |
| Mechanical Performance: Fitting Nail Retention Force | 1.0N Min. (Axial pull out force at 253mm/min) |
| Environmental Performance: Durability | Contact Resistance: 60m Max. (20 cycles, |
| Environmental Performance: Temperature Rise | 30C Max. (When max rated current passes through FPC) |
| Environmental Performance: Vibration | Appearance: No Damage; Contact Resistance: 60m Max.; Discontinuity: 1sec Max. (1.5mm P-P, 10-55-10 Hz, 2 hrs in X,Y,Z axes, DC 1mA) |
| Environmental Performance: Shock | Appearance: No Damage; Contact Resistance: 60m Max.; Discontinuity: 1sec Max. (490m/s {50G}, 3 times in 6 directions, DC 1mA) |
| Environmental Performance: Heat Resistance | Appearance: No Damage; Contact Resistance: 60m Max. (852C for 96 hours) |
| Environmental Performance: Cold Resistance | Appearance: No Damage; Contact Resistance: 60m Max. (-402C for 96 hours) |
| Environmental Performance: Humidity | Appearance: No Damage; Contact Resistance: 60m Max.; Insulation Resistance: 30 M Min.; Dielectric Strength: No Breakdown (602C, 90-95% RH for 96 hours) |
| Environmental Performance: Temperature Cycling | Appearance: No Damage; Contact Resistance: 60m Max. (5 cycles of -553C for 30 min and +853C for 30 min) |
| Environmental Performance: Salt Spray | Appearance: No Damage; Contact Resistance: 60m Max. (51% NaCl, 352C for 484 hours) |
| Environmental Performance: SO2 Gas | Appearance: No Damage; Contact Resistance: 60m Max. (505 ppm SO2, 402C for 24 hours) |
| Environmental Performance: NH3 Gas | Appearance: No Damage; Contact Resistance: 60m Max. (40 minutes exposure to NH3 gas from 28% Ammonia solution) |
| Soldering Performance: Solderability | Solder Wetting: 75% Min. wetting area, no voids/pinholes. (Immersion at 2455C for 30.5 sec) |
| Soldering Performance: Resistance to Soldering Heat | Appearance: No Damage. (Iron soldering: 370-400C for 5 sec Max.) |
Note on Operation: The connector features a flip-top design. To insert FPC, lift the top cover, insert FPC with conductive side down, then press the cover down to lock. To eject, lift the cover and withdraw FPC. Maximum opening angle is 120 degrees. Avoid excessive force when opening/closing and ensure proper FPC insertion angle to prevent discontinuity.
RoHS Compliance: Test reports indicate compliance with EU RoHS Directive 2011/65/EU for Lead (Pb), Cadmium (Cd), Mercury (Hg), and Hexavalent Chromium (Cr(VI)) in various components.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.