0.5mm Pitch SMT Connector CAX CAX-AFC24-54XIB-H2.0 FPC Easy On Back Flip Right Angle Design
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This specification covers the 0.5mm Pitch H=2.0 FPC Easy-on Back-flip Right-Angle SMT type connectors series. Designed for reliable electrical connections, these connectors feature a back-flip actuator for easy FPC insertion and removal. They are suitable for applications requiring a 0.5mm pitch and a height of 2.0mm, with a robust operating temperature range and durable materials.
Product Attributes
- Brand: DAET
- Origin: ZHE JIANG CHUANG DU ELECTRONICS CO.,LTD
- Housing Material: LCP (Liquid Crystal Polymer), White, UL94V-0 Flammability Rating
- Actuator Material: LCP, Black, UL94V-0 Flammability Rating
- Terminal Material: Phosphor Bronze
- Fitting Nail Material: Phosphor Bronze
Technical Specifications
| Category | Item | Specifications | Test Condition |
|---|---|---|---|
| Rating | Operating Voltage (Max.) | 50V AC | |
| Current Rating (Max.) | 0.5A DC | *Includes temperature rise due to current. | |
| Operating Temperature Range | -55C ~ +85C | ||
| Operating Humidity Range | 90% Relative Humidity Max. | ||
| Electrical Performance | Contact Resistance | 40 m Max. | Mate applicable FPC, 20mV Max, 10mA (EIA-364-23) |
| Insulation Resistance | 500 M Min. | Mate applicable FPC, 500V DC between adjacent terminals/ground (EIA-364-21) | |
| Dielectric Strength | No Breakdown | Mate applicable FPC, 250V AC (rms) for 1 minute between adjacent terminals/ground (EIA-364-20) | |
| Mechanical Performance | FPC Retention Force | 0.30N Min. | Pull FPC at 253mm/min after actuator insertion. |
| Terminal Retention Force | 3N Min. | Axial pull out force at 253mm/min on terminal in housing. | |
| Fitting Nail Retention Force | 1.0N Min. | Axial pull out force at 253mm/min on Fitting Nail in housing. | |
| Environmental Performance | Durability | Contact Resistance: 60m Max. | 20 cycles, less than 10 cycles/min. |
| Temperature Rise | 30C Max. | Measure contact point temperature rise at max rated current (EIA-364-70 Method 2). | |
| Vibration | Appearance | No Damage | DC 1mA, 1.5mm amplitude, 10-55-10 Hz/min, 2 hrs in X,Y,Z axes (EIA-364-28 Condition I). |
| Contact Resistance | 60m Max. | ||
| Shock | Appearance | No Damage | DC 1mA, 490m/s {50G} for 3 times in 6 directions (EIA-364-27, test condition A). |
| Contact Resistance | 60m Max. | ||
| Heat Resistance | Appearance | No Damage | Mate FPC, expose to 852C for 96 hrs, condition at room temp 1-2 hrs. |
| Contact Resistance | 60m Max. | ||
| Cold Resistance | Appearance | No Damage | Mate FPC, expose to -402C for 96 hrs, condition at room temp 1-2 hrs. |
| Contact Resistance | 60m Max. | ||
| Humidity | Appearance | No Damage | Mate FPC, expose to 602C, 90-95% RH for 96 hrs, condition at room temp 1-2 hrs. |
| Contact Resistance | 60m Max. | ||
| Insulation Resistance | 30 M Min. | ||
| Temperature Cycling | Appearance | No Damage | 5 cycles: -553C (30 min), +853C (30 min), condition at room temp 1-2 hrs. |
| Contact Resistance | 60m Max. | ||
| Salt Spray | Appearance | No Damage | 51% NaCl solution, 352C for 484 hrs, wash with clean water and dry. |
| Contact Resistance | 60m Max. | ||
| SO2 Gas | Appearance | No Damage | 505 ppm SO2 gas, 402C for 24 hrs. |
| Contact Resistance | 60m Max. | ||
| NH3 Gas | Appearance | No Damage | 40 minutes exposure to NH3 gas from 28% Ammonia solution. |
| Contact Resistance | 60m Max. | ||
| Solderability | Solder Wetting | 75% of immersed area must show no voids, pinholes. | Immersion in molten solder (2455C) for 30.5 sec, 0.1mm from housing bottom. |
| Resistance to Soldering Heat (Manual) | No Damage | Soldering iron: 0.2mm from tip, 370-400C, 5 sec Max. | |
| Infrared Reflow Condition | Temperature Profile | See graph in original document. Peak Temp: 250C MAX. (20-40 sec), Pre-Heat Max: 150C. |
Usage Instructions:
- Insert FPC with actuator opened.
- Ensure FPC is fully inserted and not moved, then press actuator down to lock.
- To remove FPC: Lift actuator and withdraw FPC.
Warnings:
- Actuator rotation angle must not exceed 90 degrees.
- Apply pressure evenly to the center of the actuator.
- Lift the actuator from its center.
- PCB flatness must be within 0.1mm max.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina