0.5mm Pitch H2.0 FPC Easy-on R A SMT Connectors CAX CAX AFC01 26XCB H2.0 with Electrical Connections
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This specification covers the 0.5mm Pitch H=2.0 FPC Easy-on R/A SMT type connectors series. Designed for reliable electrical connections, these connectors are manufactured by Zhejiang Chuang Du Electronics Co., Ltd. and are suitable for a wide range of operating temperatures and humidity levels. The Easy-on design facilitates simple and secure FPC insertion and removal.
Product Attributes
- Brand: Zhejiang Chuang Du Electronics Co., Ltd.
- Origin: China
- Product Series: 0.5mm Pitch H=2.0 FPC Easy-on R/A SMT type connectors
- Housing Material: LCP (Flammability Rating: UL94V-0)
- Actuator Material: LCP (Flammability Rating: UL94V-0)
- Terminal Material: Phosphor Bronze
- Fitting Nail Material: Phosphor Bronze
- Housing Color: White
- Actuator Color: Black
Technical Specifications
| Category | Item | Specifications | Test Condition |
|---|---|---|---|
| Rating | Operating Voltage (Max.) | 50V AC | |
| Current Rating (Max.) | 0.5A DC | *Including terminal temperature rise. | |
| Operating Temperature Range | -55C ~ +85C | ||
| Operating Humidity Range | 90% RH Max. | Relative humidity 90% max. | |
| Storage Temperature Range | -10C ~ +50C | ||
| Electrical Performance | Contact Resistance | 30 m Max. | Mate applicable FPC and measure by dry circuit, 20mV Max, 10mA. (EIA-364-23) |
| Insulation Resistance | 500 M Min. | Mate applicable FPC and apply 500V DC between adjacent terminal or ground. (EIA-364-21) | |
| Dielectric Strength | No Breakdown | Mate applicable FPC, apply 250V AC(rms) for 1 minute between adjacent terminal or ground. (EIA-364-20) | |
| Mechanical Performance | FPC Retention Force | 0.30N Min. | Insert the actuator, pull the FPC at a rate of 253mm per minute. |
| Terminal Retention Force | 3N Min. | Apply axial pull out force at the rate of 253 mm/minute on the terminal assembled in the housing. | |
| Fitting Nail Retention Force | 1.0N Min. | Apply axial pull out force at the rate of 253 mm/minute on the Fitting Nail assembled in the housing. | |
| Environmental & Others | Durability | Contact Resistance: 60m Max. | Insert and withdraw actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. |
| Temperature Rise | 30C Max. | Mate applicable FPC and measure the temperature rise of contact when the maximum AC rated current is passed. (EIA-364-70 METHOD 2) | |
| Vibration | Contact Resistance: 60m Max. Discontinuity: 1sec Max. | Mate connectors and subject to vibration conditions (Amplitude: 1.5mm P-P, Frequency: 10~55~10 Hz in 1 minute, Duration: 2 hours in each of X,Y,Z axes), passing DC 1mA. (EIA-364-28 Condition I) | |
| Shock | Contact Resistance: 60m Max. Discontinuity: 1sec Max. | Mate applicable FPC and subject to 3 times of shocks (Peak value: 490m/s {50G}) for each of 6 directions along 3 mutually perpendicular axes, passing DC 1 mA current. (EIA-364-27, test condition A) | |
| Heat Resistance | Contact Resistance: 60m Max. | Mate applicable FPC and expose to 852C for 96 hours. Condition at ambient room conditions for 1 to 2 hours before measurement. | |
| Cold Resistance | Contact Resistance: 60m Max. | Mate applicable FPC and expose to -402C for 96 hours. Condition at ambient room conditions for 1 to 2 hours before measurement. | |
| Humidity | Contact Resistance: 60m Max. Insulation Resistance: 30 M Min. Dielectric Strength: No Breakdown | Mate applicable FPC and expose to 60 2C, 90-95% RH for 96 hours. Condition at ambient room conditions for 1 to 2 hours before measurement. | |
| Temperature Cycling | Contact Resistance: 60m Max. | Mate applicable FPC and subject to 5 cycles of -553C (30 min) and +853C (30 min). Condition at ambient room conditions for 1 to 2 hours before measurement. | |
| Salt Spray | Contact Resistance: 60m Max. | Mate applicable FPC and expose to 5 1% NaCl solution at 352C for 484 hours. Wash with clean water and dry. | |
| SO2 Gas | Contact Resistance: 60m Max. | Mate applicable FPC and expose to 50 5 ppm SO2 gas at 402C for 24 hours. | |
| NH3 Gas | Contact Resistance: 60m Max. | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | |
| Solderability | Solder Wetting | 75% of immersed area must show no voids, pin holes. | Tip of solder tails and fitting nails into molten solder (2455C) up to 0.1mm from housing bottom for 30.5 seconds. |
| Resistance to Soldering Heat (Soldering Iron) | No Damage | 0.2mm from terminal tip and fitting nail tip. Soldering time: 5 seconds Max. Solder temperature: 370~400C. |
Infrared Reflow Condition
Temperature on Board Pattern Side:
- Start (Pre-Heat 150C MAX.)
- 230C MIN. / 20~40 sec
- 250C MAX. (Peak Temp) 3 sec. or less
- 60 sec (Soak)
- 60~90 sec (Cooling)
Operating Instructions
Step 1: Use the thumb or the forefinger, raise the top cover up.
Step 2: FPC metal fingers facing down, insert parallel into the connector.
Step 3: Press the top cover lightly and rotate down to lock, until FPC is fully inserted and not moved.
Step 4: To withdraw FPC, lift the top cover carefully and withdraw the FPC.
Warnings:
- The rotation angle of the cover should not exceed 120 degrees.
- Inserting FPC at an excessive angle may cause electrical discontinuity.
- The upward pulling force should not exceed 0.04N/pin max.
- Do not use excessive force when opening the connector's top cover to avoid touching the terminals.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina