Back Flip Actuator FPC Connector 0.5mm Pitch CAX CAX-AFC24-32XIB-H2.0 with UL94V-0 Housing Material
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This specification covers the 0.5mm Pitch H=2.0 FPC Easy-on Back-flip R/A SMT type connectors series. Designed for reliable electrical connections, these connectors feature a back-flip actuator for easy FPC insertion and removal. They are suitable for applications requiring a 0.5mm pitch and a height of 2.0mm, with a rated voltage of 50V AC and a current rating of 0.5A DC. The operating temperature range is -55C to +85C.
Product Attributes
- Brand: DAET
- Origin: ZHE JIANG CHUANG DU ELECTRONICS CO.,LTD
- Housing Material: LCP (Liquid Crystal Polymer), White, UL94V-0 Flammability Rating
- Actuator Material: LCP, Black, UL94V-0 Flammability Rating
- Terminal Material: Phosphor Bronze
- Fitting Nail Material: Phosphor Bronze
Technical Specifications
| Item | Specifications | Test Condition | Requirement |
|---|---|---|---|
| Rating | |||
| Operating Voltage (Max.) | 50V AC | ||
| Current Rating (Max.) | 0.5A DC | *Including terminal temperature rise. | |
| Operating Temperature Range | -55C ~ +85C | ||
| Operating Humidity Range | Relative humidity 90% max. | ||
| Storage Temperature Range | -10C ~ +50C | ||
| Storage Humidity Range | Relative humidity 90% max. | ||
| Electrical Performance | |||
| Contact Resistance | 40 m Max. | Mate applicable FPC and measure by dry circuit, 20mV Max, 10mA. (EIA-364-23) | |
| Insulation Resistance | 500 M Min. | Mate applicable FPC and apply 500V DC between adjacent terminal or ground. (EIA-364-21) | |
| Dielectric Strength | No Breakdown | Mate applicable FPC, apply 250V AC(rms) for 1 minute between adjacent terminal or ground.(EIA-364-20) | |
| Mechanical Performance | |||
| FPC Retention Force | Pos.x 0.30N Min. | Insert the actuator, pull the FPC at a rate of 253mm per minute. | |
| Terminal Retention Force | 3N Min. | Apply axial pull out force at the rate of 253 mm/minute on the terminal assembled in the housing. | |
| Fitting Nail Retention Force | 1.0N Min. | Apply axial pull out force at the rate of 253 mm/minute on the Fitting Nail assembled in the housing. | |
| Environmental Performance and Others | |||
| Durability | Contact Resistance: 60m Max. | Insert and withdraw actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. | |
| Temperature Rise | 30C Max. | Mate applicable FPC and measure the temperature rise of contact when the maximum AC rated current is passed. (EIA-364-70 METHOD 2) | |
| Vibration | Appearance: No Damage Contact Resistance: 60m Max. Discontinuity: 1sec Max. | Mate connectors and subject to vibration conditions (1.5mm P-P, 10~55~10 Hz in 1 minute, 2 hours in each X,Y,Z axes, passing DC 1mA). (EIA-364-28 Condition I) | |
| Shock | Appearance: No Damage Contact Resistance: 60m Max. Discontinuity: 1sec Max. | Mate applicable FPC and subject to shock conditions (490m/s {50G} for 3 times in each of 6 directions, passing DC 1mA). (EIA-364-27, test condition A) | |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and expose to 852C for 96 hours, then condition at ambient for 1-2 hours. | |
| Cold Resistance | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and expose to -402C for 96 hours, then condition at ambient for 1-2 hours. | |
| Humidity | Appearance: No Damage Contact Resistance: 60m Max. Dielectric Strength: No Breakdown Insulation Resistance: 30 M Min. | Mate applicable FPC and expose to 602C, 90-95% RH for 96 hours, then condition at ambient for 1-2 hours. | |
| Temperature Cycling | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and subject to 5 cycles of -553C (30 min) and +853C (30 min), then condition at ambient for 1-2 hours. | |
| Salt Spray | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and expose to 51% NaCl solution at 352C for 484 hours, then wash with clean water and dry. | |
| SO2 Gas | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and expose to 505 ppm SO2 gas at 402C for 24 hours. | |
| NH3 Gas | Appearance: No Damage Contact Resistance: 60m Max. | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | |
| Solderability | Solder Wetting: 75% of immersed area must show no voids, pinholes. Resistance to Soldering Heat: Meets soldering conditions (soldering iron method). Appearance: No Damage | Tip of solder tails and fitting nails into molten solder (2455C) up to 0.1mm from housing bottom for 30.5 seconds. Soldering iron method: 0.2mm from terminal tip and fitting nail tip, 5 seconds Max, 370~400C. | |
Infrared Reflow Condition
Temperature on Board Pattern Side:
Pre-Heat: Max 150C (60 sec)
Soak: 20~40 sec at 230C MIN.
Peak Temp: 250C MAX. (3 sec. or less)
Time above 230C: 60~90 sec
Instructions for Use of ZIF Back-flip Type
- Insert the FPC with the actuator opened.
- FPC is totally inserted and not moved. Press the actuator and rotate down to make a reservation.
- Lift the actuator, withdraw FPC.
Warnings:
- The whirling angle can't be greater than 90 degrees.
- The strength of exerting pressure should be average and pushing actuator at the center.
- To lift actuator at the center.
- The roughness of PCB board must be in 0.1mm max.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina