0.5mm Pitch H2.0 FPC Easy On Back Flip Right Angle SMT Connector CAX CAX C24 40XIB H2.0 for FPC Assembly
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
0.5mm Pitch H=2.0 FPC Easy-on Back-Flip R/A SMT Connector Series
Product Overview
This specification covers the 0.5mm Pitch H=2.0 FPC Easy-on Back-flip Right-Angle SMT type connectors series from ZHE JIANG CHUANG DU ELECTRONICS CO.,LTD. Designed for reliable FPC connectivity, these connectors feature a back-flip actuator mechanism for easy insertion and secure mating. They are suitable for applications requiring a compact 0.5mm pitch and a height of 2.0mm.
Product Attributes
- Brand: ZHE JIANG CHUANG DU ELECTRONICS CO.,LTD
- Origin: China
- Housing Material: LCP (White, UL94V-0 Flammability Rating)
- Actuator Material: LCP (Black, UL94V-0 Flammability Rating)
- Terminal Material: Phosphor Bronze
- Fitting Nail Material: Phosphor Bronze
- RoHS Compliance: Pass (Directive 2011/65/EU with amendment (EU) 2015/863)
Technical Specifications
| Item | Specifications | Test Condition |
|---|---|---|
| Ratings | ||
| Operating Voltage (Max.) | 50V AC | |
| Current Rating (Max.) | 0.5A DC | *Including terminal temperature rise. |
| Operating Temperature Range | -55C ~ +85C | |
| Operating Humidity Range | 90% RH Max. | |
| Storage Temperature Range | -10C ~ +50C | |
| Storage Humidity Range | 90% RH Max. | |
| Electrical Performance | ||
| Contact Resistance | 40 m Max. | Mate applicable FPC and measure by dry circuit, 20mV Max, 10mA. (EIA-364-23) |
| Insulation Resistance | 500 M Min. | Mate applicable FPC and apply 500V DC between adjacent terminal or ground. (EIA-364-21) |
| Dielectric Strength | No Breakdown | Mate applicable FPC, apply 250V AC(rms) for 1 minute between adjacent terminal or ground. (EIA-364-20) |
| Mechanical Performance | ||
| FPC Retention Force | Pos.x 0.30N Min. | Insert the actuator, pull the FPC at a rate of 253mm per minute. |
| Terminal Retention Force | 3N Min. | Apply axial pull out force at the rate of 253 mm/minute on the terminal assembled in the housing. |
| Fitting Nail Retention Force | 1.0N Min. | Apply axial pull out force at the rate of 253 mm/minute on the Fitting Nail assembled in the housing. |
| Environmental Performance and Others | ||
| Durability | Contact Resistance: 60m Max. | Insert and withdraw actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. |
| Temperature Rise | 30C Max. | Mate applicable FPC and measure the temperature rise of contact when the maximum AC rated current is passed. (EIA-364-70 METHOD 2) |
| Vibration | Appearance: No Damage Contact Resistance: 60m Max. Discontinuity: 1sec Max. | Mate connectors and subject to vibration conditions (1.5mm Amplitude, 10~55~10 Hz, 2 hours in each of X,Y,Z axes, passing DC 1mA). (EIA-364-28 Condition I) |
| Shock | Appearance: No Damage Contact Resistance: 60m Max. Discontinuity: 1sec Max. | Mate applicable FPC, subject to 490m/s {50G} shock (3 times each of 6 directions, passing DC 1 mA). (EIA-364-27, test condition A) |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and expose to 852C for 96 hours, then condition at ambient room conditions for 1 to 2 hours. |
| Cold Resistance | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and expose to -402C for 96 hours, then condition at ambient room conditions for 1 to 2 hours. |
| Humidity | Appearance: No Damage Contact Resistance: 60m Max. Dielectric Strength: No Breakdown Insulation Resistance: 30 M Min. | Mate applicable FPC and expose to 60 2C, 90-95% RH for 96 hours, then condition at ambient room conditions for 1 to 2 hours. |
| Temperature Cycling | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and subject to 5 cycles of -553C (30 min) and +853C (30 min), then condition at ambient room conditions for 1 to 2 hours. |
| Salt Spray | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and expose to 51% NaCl solution at 352C for 484 hours, then rinse with clean water and dry. |
| SO2 Gas | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and expose to 505 ppm SO2 gas at 402C for 24 hours. |
| NH3 Gas | Appearance: No Damage Contact Resistance: 60m Max. | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solderability | Solder Wetting: 75% of immersed area must show no voids, pin holes. Resistance to Soldering Heat: (Soldering iron method) | Tip of solder tails and fitting nails into molten solder (2455C) up to 0.1mm from housing bottom for 30.5 seconds. Soldering iron method: 0.2mm from terminal tip and fitting nail tip, 5 seconds Max, 370~400C. |
Infrared Reflow Condition
Refer to the attached temperature condition graph for infrared reflow soldering.
Instructions for Use
- Step 1: Insert the FPC with the actuator opened.
- Step 2: FPC is totally inserted and not moved. Press the actuator and rotate down to lock.
- Step 3: Lift the actuator and withdraw FPC.
Warnings:
- The rotation angle of the actuator should not exceed 90 degrees.
- Apply pressure evenly on the center of the actuator.
- Lift the actuator from its center.
- PCB flatness must be within 0.1mm max.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina