0.5mm Pitch FPC SMT Connector CAX CAX-AFC24-16XIB-H2.0 with UL94V-0 Flammability Rating and Back-flip Design
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This specification covers the 0.5mm Pitch H=2.0 FPC Easy-on Back-flip R/A SMT type connectors series. These connectors are designed for SMT applications and feature a back-flip actuator for easy operation. They are suitable for a wide operating temperature range of -55C to +85C and a maximum operating voltage of 50V AC with a current rating of 0.5A DC.
Product Attributes
- Brand: DAET
- Origin: Zhejiang Chuang Du Electronics Co., Ltd.
- Housing Material: LCP (Liquid Crystal Polymer)
- Housing Color: White
- Actuator Material: LCP
- Actuator Color: Black
- Terminal Material: Phosphor Bronze
- Fitting Nail Material: Phosphor Bronze
- Flammability Rating: UL94V-0
Technical Specifications
| Category | Item | Specifications | Test Condition |
|---|---|---|---|
| Rating | Operating Voltage (Max.) | 50V AC | |
| Current Rating (Max.) | 0.5A DC | *Includes temperature rise due to current flow. | |
| Operating Temperature Range | -55C ~ +85C | ||
| Rating | Operating Humidity Range | 90% RH Max. | |
| Storage Temperature Range | -10C ~ +50C | ||
| Rating | Storage Humidity Range | 90% RH Max. | |
| Pitch | 0.5mm | ||
| Electrical Performance | Contact Resistance | 40 m Max. | Mate applicable FPC, test voltage 20mV, current 10mA (EIA-364-23) |
| Insulation Resistance | 500 M Min. | Mate applicable FPC, apply 500V DC between adjacent terminals or ground (EIA-364-21) | |
| Dielectric Strength | No Breakdown | Mate applicable FPC, apply 250V AC (rms) for 1 minute between adjacent terminals or ground (EIA-364-20) | |
| Mechanical Performance | FPC Retention Force | 0.30N Min. | Insert actuator, pull FPC at 253mm/min. |
| Terminal Retention Force | 3N Min. | Apply axial pull out force on terminal at 253mm/min. | |
| Fitting Nail Retention Force | 1.0N Min. | Apply axial pull out force on Fitting Nail at 253mm/min. | |
| Environmental Performance | Durability | Contact Resistance: 60m Max. | Insert/withdraw actuator up to 20 cycles at |
| Temperature Rise | 30C Max. | Measure contact point temperature rise when maximum rated current passes through FPC (EIA-364-70 Method 2) | |
| Vibration | Appearance: No Damage, Contact Resistance: 60m Max., Discontinuity: 1sec Max. | DC 1mA, 1.5mm displacement, 10~55~10 Hz/min for 2 hrs in X,Y,Z axes (EIA-364-28 Condition I) | |
| Environmental Performance | Shock | Appearance: No Damage, Contact Resistance: 60m Max., Discontinuity: 1sec Max. | DC 1mA, 490m/s {50G} for 3 times in 6 directions (X,Y,Z axes) (EIA-364-27, test condition A) |
| Heat Resistance | Appearance: No Damage, Contact Resistance: 60m Max. | Expose to 852C for 96 hours, then condition at room temp for 1-2 hours. | |
| Cold Resistance | Appearance: No Damage, Contact Resistance: 60m Max. | Expose to -402C for 96 hours, then condition at room temp for 1-2 hours. | |
| Environmental Performance | Humidity | Appearance: No Damage, Contact Resistance: 60m Max., Dielectric Strength: No Breakdown, Insulation Resistance: 30 M Min. | Expose to 602C, 90-95% RH for 96 hours, then condition at room temp for 1-2 hours. |
| Temperature Cycling | Appearance: No Damage, Contact Resistance: 60m Max. | 5 cycles of -553C (30 min) and +853C (30 min), then condition at room temp for 1-2 hours. | |
| Salt Spray | Appearance: No Damage, Contact Resistance: 60m Max. | 51% NaCl solution, 352C for 484 hours, then rinse with clean water and dry. | |
| Environmental Performance | SO2 Gas | Appearance: No Damage, Contact Resistance: 60m Max. | 505 ppm SO2 gas, 402C for 24 hours. |
| NH3 Gas | Appearance: No Damage, Contact Resistance: 60m Max. | 40 minutes exposure to NH3 gas from 28% Ammonia solution. | |
| Soldering | Solderability (Wetting) | 75% of immersed area must show no voids or pinholes. | Immersion in molten solder at 2455C up to 0.1mm from housing for 30.5 sec. |
| Resistance to Soldering Heat (Manual) | Appearance: No Damage | Soldering iron method: 0.2mm from terminal tip, 5 sec Max, 370-400C. |
Infrared Reflow Condition
Temperature on Board Pattern Side:
- Pre-Heat: Start (150C MAX.)
- Time: 60sec
- Time: 60~90sec
- Time: 30sec
- 230C MIN./ 20~40sec
- 250C MAX. (Peak Temp)
- Time: 3sec or less
Instructions for Use
- Step 1: Insert the FPC with the actuator opened.
- Step 2: FPC is totally inserted and not moved. Press the actuator and rotate down to secure.
- Step 3: Lift the actuator and withdraw FPC.
Warnings:
- The rotation angle cannot be greater than 90 degrees.
- The pressure applied should be average and on the center of the actuator.
- Lift the actuator at the center.
- PCB board flatness must be within 0.1mm max.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina