0.5mm Pitch H2.0 FPC Easy-on Right-Angle SMT Connectors CAX CAX-AFC01-15XCB-H2.0 Electrical Connection
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This product is a series of 0.5mm Pitch H=2.0 FPC Easy-on Right-Angle SMT type connectors. Designed for reliable connections, these connectors feature a robust construction with LCP housing and actuator, and phosphor bronze terminals and fitting nails. They are suitable for applications requiring a 0.5A DC current rating and a maximum operating voltage of 50V AC, operating within a temperature range of -55C to +85C. The Easy-on design facilitates simple and secure FPC insertion and removal.
Product Attributes
- Brand: ZHE JIANG CHUANG DU ELECTRONICS CO.,LTD
- Product Series: 0.5mm Pitch H=2.0 FPC Easy-on R/A SMT type connectors
- Housing Material: LCP (White, UL94V-0 Flammability Rating)
- Actuator Material: LCP (Black, UL94V-0 Flammability Rating)
- Terminal Material: Phosphor Bronze
- Fitting Nail Material: Phosphor Bronze
- Pitch: 0.5mm
- Height: 2.0mm
- Type: Easy-on, Right-Angle (R/A), SMT
Technical Specifications
| Item | Specifications | Test Conditions |
|---|---|---|
| Ratings | ||
| Operating Voltage (Max.) | 50V AC | |
| Current Rating (Max.) | 0.5A DC | *Including terminal temperature rise. |
| Operating Temperature Range | -55C ~ +85C | |
| Operating Humidity Range | 90% RH Max. | Relative humidity 90% max. |
| Storage Temperature Range | -10C ~ +50C | |
| Storage Humidity Range | 90% RH Max. | Relative humidity 90% max. |
| Electrical Performance | ||
| Contact Resistance | 30 m Max. | Mate applicable FPC and measure by dry circuit, 20mV Max, 10mA. (EIA-364-23) |
| Insulation Resistance | 500 M Min. | Mate applicable FPC and apply 500V DC between adjacent terminal or ground. (EIA-364-21) |
| Dielectric Strength | No Breakdown | Mate applicable FPC, apply 250V AC(rms) for 1 minute between adjacent terminal or ground.(EIA-364-20) |
| Mechanical Performance | ||
| FPC Retention Force | 0.30N Min. | Insert the actuator, pull the FPC at a rate of 253mm per minute. |
| Terminal Retention Force | 3N Min. | Apply axial pull out force at the rate of 253 mm/minute on the terminal assembled in the housing. |
| Fitting Nail Retention Force | 1.0N Min. | Apply axial pull out force at the rate of 253 mm/minute on the Fitting Nail assembled in the housing. |
| Environmental Performance and Others | ||
| Durability | Contact Resistance: 60m Max. | Insert and withdraw actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. |
| Temperature Rise | 30C Max. | Mate applicable FPC and measure the temperature rise of contact when the maximum AC rated current is passed. (EIA-364-70 METHOD 2) |
| Vibration | Appearance: No Damage Contact Resistance: 60m Max. Discontinuity: 1sec Max. | Mate connectors and subject to vibration conditions: Amplitude: 1.5mm P-P, Frequency: 10~55~10 Hz in 1 minute, Duration: 2 hours in each of X,Y,Z axes. (EIA-364-28 Condition I), passing DC 1mA. |
| Shock | Appearance: No Damage Contact Resistance: 60m Max. Discontinuity: 1sec Max. | Mate applicable FPC and subject to 3 times of shocks in each of 6 directions along 3 mutually perpendicular axes, Peak value: 490m/s2 {50G}. (EIA-364-27, test condition A), passing DC 1 mA. |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and expose to 852C for 96 hours. Condition at ambient room conditions for 1 to 2 hours. |
| Cold Resistance | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and expose to -402C for 96 hours. Condition at ambient room conditions for 1 to 2 hours. |
| Humidity | Appearance: No Damage Contact Resistance: 60m Max. Dielectric Strength: No Breakdown Insulation Resistance: 30 M Min. | Mate applicable FPC and expose to 60 2C, 90-95% RH for 96 hours. Condition at ambient room conditions for 1 to 2 hours. |
| Temperature Cycling | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and subject to 5 cycles: a) -553C 30 minutes, b) +853C 30 minutes. Condition at ambient room conditions for 1 to 2 hours. |
| Salt Spray | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and expose to 5 1% NaCl solution at 35 2C for 48 4 hours. Wash with clean water and dry. |
| SO2 Gas | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and expose to 50 5 ppm SO2 gas at 40 2C for 24 hours. |
| NH3 Gas | Appearance: No Damage Contact Resistance: 60m Max. | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. |
| Solderability | Solder Wetting: 75% of immersed area must show no voids, pin holes. | Tip of solder tails and fitting nails into molten solder (2455C) up to 0.1mm from housing bottom for 30.5 seconds. |
| Resistance to Soldering Heat | Appearance: No Damage | Soldering iron method: 0.2mm from terminal tip and fitting nail tip, 5 seconds Max, Solder temperature: 370~400C. |
Infrared Reflow Condition
Temperature Condition Graph (Temperature on Board Pattern Side):
| Stage | Temperature (C) | Time (seconds) |
|---|---|---|
| Start (Pre-Heat) | 150C MAX. | 60 |
| 230C MIN. / 20~40sec | 60~90 | |
| Peak Temp | 250C MAX. | 3sec. or less |
Operation Instructions for Easy-On Type Connectors
- Step 1: Use the thumb or forefinger to lift the top cover upwards.
- Step 2: Insert the FPC with the conductive side facing down, parallel to the connector.
- Step 3: Press the top cover lightly and rotate it down to secure, ensuring the FPC is fully inserted and stable.
- Step 4: To withdraw the FPC, carefully lift the top cover and then remove the FPC.
Warnings:
- The rotation angle of the cover should not exceed 120 degrees.
- Inserting the FPC at an excessive angle may cause electrical discontinuity.
- The upward pulling force should not exceed 0.04N/pin max.
- When opening the connector's top cover, avoid using excessive force to prevent touching the terminals.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina