Compact 0.5mm Pitch FPC ZIF R A SMT Connector with Phosphor Bronze Terminals CAX CAX AFC07 06SCB H2 0
Product Overview
This specification covers the 0.5mm Pitch FPC ZIF R/A SMT Type Connectors series. Designed for reliable connectivity, these connectors feature a robust construction with LCP housing and PA6T actuator, ensuring durability and compliance with UL94V-0 flammability rating. They are suitable for applications requiring a 0.5mm pitch and a height of 2.0mm, offering a compact solution for various electronic assemblies.
Product Attributes
- Brand: ZHE JIANG CHUANG DU ELECTRONICS CO.,LTD
- Origin: China
- Housing Material: LCP (Liquid Crystal Polymer)
- Housing Color: White
- Actuator Material: PA6T (Polyamide-6T)
- Actuator Color: Black
- Terminal Material: Phosphor Bronze
- Fitting Nail Material: Brass
- Flammability Rating: UL94V-0 (Housing and Actuator)
- Packaging Options: Tube (small batch), Reel (bulk shipment)
Technical Specifications
| Item | Specification | Test Condition |
|---|---|---|
| General | ||
| Pitch | 0.5mm | |
| Height | 2.0mm | |
| Type | FPC ZIF R/A Upper Type | |
| Rating | ||
| Operating Voltage (Max.) | 50V AC | |
| Current Rating (Max.) | 0.4A DC | |
| Operating Temperature Range | -25C ~ +85C | |
| Operating Humidity Range | 90% RH max. | |
| Storage Temperature Range | -10C ~ +50C | |
| Storage Humidity Range | 90% RH max. | |
| Performance | ||
| Contact Resistance | 40 m Max. | Mate applicable FPC, 20mV Max, 10mA (EIA-364-23) |
| Insulation Resistance | 500 M Min. | Mate applicable FPC, 500V DC between adjacent terminals or ground (EIA-364-21) |
| Dielectric Strength | No Breakdown | Mate applicable FPC, 250V AC (rms) for 1 minute between adjacent terminals or ground (EIA-364-20) |
| FPC Retention Force | Pos.x 0.3N Min. | Insert actuator, pull FPC at 253mm/min |
| Terminal Retention Force | 3N Min. | Apply axial pull out force at 253mm/min on terminal in housing |
| Fitting Nail Retention Force | 1N Min. | Apply axial pull out force at 253mm/min on fitting nail in housing |
| Environmental & Other Performance | ||
| Durability | Contact Resistance: 60m Max. | Insert/withdraw actuator up to 20 cycles at |
| Temperature Rise | 30C Max. | Measure contact point temperature rise at max rated current (EIA-364-70 METHOD 2) |
| Vibration | Appearance: No Damage; Contact Resistance: 60m Max.; Discontinuity: 1sec Max. | DC 1mA, 1.5mm displacement, 10-55-10 Hz/min for 2 hours in X, Y, Z axes (EIA-364-28 Condition I) |
| Shock | Appearance: No Damage; Contact Resistance: 60m Max.; Discontinuity: 1sec Max. | DC 1mA, 490m/s {50G} for 3 times in 6 directions (X, Y, Z axes) (EIA-364-27, test condition A) |
| Heat Resistance | Appearance: No Damage; Contact Resistance: 60m Max. | Expose to 852C for 96 hours, then condition at room temp. |
| Cold Resistance | Appearance: No Damage; Contact Resistance: 60m Max. | Expose to -402C for 96 hours, then condition at room temp. |
| Humidity | Appearance: No Damage; Contact Resistance: 60m Max.; Dielectric Strength: No Breakdown; Insulation Resistance: 40 M Min. | Expose to 602C, 90-95% RH for 96 hours, then condition at room temp. |
| Temperature Cycling | Appearance: No Damage; Contact Resistance: 60m Max. | 5 cycles of -553C (30 min) to +853C (30 min), then condition at room temp. |
| Salt Spray | Appearance: No Damage; Contact Resistance: 60m Max. | 51% NaCl solution, 352C for 484 hours, then wash and dry. |
| SO2 Gas | Appearance: No Damage; Contact Resistance: 60m Max. | 505 ppm SO2 gas, 402C for 24 hours. |
| NH3 Gas | Appearance: No Damage; Contact Resistance: 60m Max. | 40 minutes exposure to NH3 gas from 28% Ammonia solution. |
| Solderability | Solder Wetting: 75% Min. wetting area, no voids/pinholes. | Immersion in 2455C solder bath for 30.5 seconds, 0.1mm from housing bottom. |
| Resistance to Soldering Heat | Appearance: No Damage. | Refer to Paragraph 7 for IR reflow. Soldering iron method: 0.3mm from tip, 3 sec max, 370-400C. |
Infrared Reflow Condition
Temperature Condition Graph (Temperature on Board Pattern Side):
Start (Pre-Heat 150C MAX.)
Time(seconds): (60sec) (60~90sec) (30sec)
Temperature (C): 0, 50, 100, 150, 200, 230 (MIN./ 2040sec), 250 (MAX. Peak Temp) (3sec. or less)
RoHS Compliance
Material testing reports indicate compliance with RoHS Directive 2011/65/EU for Lead (Pb), Cadmium (Cd), Mercury (Hg), Hexavalent Chromium (Cr(VI)), Polybrominated Biphenyls (PBBs), and Polybrominated Diphenyl Ethers (PBDEs). Specific test results for LCP plastic core, PA6T plastic core, tinned terminals, and brass strips show detected levels below the regulated limits or as 'Not Detected' (N.D.).
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.