FPC Easy-on Right-Angle SMT Connector 0.5mm Pitch Connection CAX CAX-AFC01-50XCB-H2.0 for Industrial
Product Overview
This product is a series of 0.5mm Pitch H=2.0 FPC Easy-on Right-Angle SMT type connectors. Designed for reliable connections, these connectors feature a unique "Easy-on" mechanism for simplified FPC insertion and removal. They are suitable for a wide range of operating temperatures and humidity levels, making them versatile for various industrial applications.
Product Attributes
- Brand: ZHE JIANG CHUANG DU ELECTRONICS CO.,LTD
- Origin: China
- Housing Material: LCP (White, UL94V-0 Flammability Rating)
- Actuator Material: LCP (Black, UL94V-0 Flammability Rating)
- Terminal Material: Phosphor Bronze
- Fitting Nail Material: Phosphor Bronze
- Pitch: 0.5mm
- Height: 2.0mm
- Type: FPC Easy-on R/A SMT
- Certifications: UL94V-0 (Flammability Rating)
Technical Specifications
| Item | Specifications | Test Condition |
|---|---|---|
| Ratings | ||
| Operating Voltage (Max.) | 50V AC | |
| Current Rating (Max.) | 0.5A DC | *Including terminal temperature rise. |
| Operating Temperature Range | -55C ~ +85C | |
| Operating Humidity Range | 90% RH Max. | Relative humidity 90% max. |
| Storage Temperature Range | -10C ~ +50C | |
| Storage Humidity Range | 90% RH Max. | Relative humidity 90% max. |
| Electrical Performance | ||
| Contact Resistance | 30 m Max. | Mate applicable FPC, 20mV Max, 10mA. (EIA-364-23) |
| Insulation Resistance | 500 M Min. | Mate applicable FPC, 500V DC between adjacent terminals or ground. (EIA-364-21) |
| Dielectric Strength | No Breakdown | Mate applicable FPC, 250V AC (rms) for 1 minute between adjacent terminals or ground. (EIA-364-20) |
| Mechanical Performance | ||
| FPC Retention Force | 0.30N Min. (per position) | Insert actuator, pull FPC at 253mm/min. |
| Terminal Retention Force | 3N Min. | Axial pull out force on terminal in housing at 253mm/min. |
| Fitting Nail Retention Force | 1.0N Min. | Axial pull out force on fitting nail in housing at 253mm/min. |
| Environmental Performance and Others | ||
| Durability | Contact Resistance: 60m Max. | 20 cycles insertion/withdrawal at |
| Temperature Rise | 30C Max. | Measure at contact point when max rated current is passed. (EIA-364-70 METHOD 2) |
| Vibration Resistance | Contact Resistance: 60m Max. Discontinuity: 1sec Max. | DC 1mA, 1.5mm amplitude, 10-55-10 Hz, 2 hours per axis (X,Y,Z). (EIA-364-28 Condition I) |
| Shock Resistance | Contact Resistance: 60m Max. Discontinuity: 1sec Max. | 490m/s {50G} shock, 3 times per direction (6 directions total), DC 1mA. (EIA-364-27, test condition A) |
| Heat Resistance | Contact Resistance: 60m Max. | Exposed to 852C for 96 hours, then conditioned at room temp. |
| Cold Resistance | Contact Resistance: 60m Max. | Exposed to -402C for 96 hours, then conditioned at room temp. |
| Humidity Resistance | Contact Resistance: 60m Max. Dielectric Strength: No Breakdown Insulation Resistance: 30 M Min. | Exposed to 602C, 90-95% RH for 96 hours, then conditioned at room temp. |
| Temperature Cycling | Contact Resistance: 60m Max. | 5 cycles of -553C (30 min) and +853C (30 min), then conditioned at room temp. |
| Salt Spray | Contact Resistance: 60m Max. | 51% NaCl solution, 352C, 484 hours, followed by rinse and dry. |
| SO2 Gas | Contact Resistance: 60m Max. | 505 ppm SO2 gas, 402C, 24 hours. |
| NH3 Gas | Contact Resistance: 60m Max. | 40 minutes exposure to NH3 gas from 28% Ammonia solution. |
| Solderability | Solder Wetting: 75% of immersed area must show no voids, pin holes. | Immersion in molten solder (2455C) up to 0.1mm from housing bottom for 30.5 sec. |
| Resistance to Soldering Heat | Visual appearance: No damage. | Soldering iron method: 0.2mm from terminal tip, 370-400C, 5 sec Max. |
Infrared Reflow Condition
Temperature Condition Graph (Temperature on Board Pattern Side)
Start (Pre-Heat 150C MAX.): 60 sec
230C MIN./ 2040sec: 60~90 sec
250C MAX.(Peak Temp) 3sec. or less: 30 sec
Operating Instructions
Step 1: Use the thumb or the forefinger, raise the top cover up.
Step 2: FPC metal fingers pointing down, parallel insertion into the connector.
Step 3: Lightly press the top cover down and rotate to lock, until FPC is fully inserted and not moved.
Step 4: To withdraw FPC, carefully lift the top cover and sequentially withdraw the FPC.
Warning: The rotation angle should not exceed 120 degrees.
Warning: If the FPC insertion angle is too large, it may cause electrical discontinuity.
Warning: Upward pulling force should not exceed 0.04N/pin max.
Warning: When opening the connector's top cover, do not use excessive force to avoid touching the terminals.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.