FPC Easy-on Back-flip Right-Angle SMT Connector CAX CAX-AFC24-30XIB-H2.0 0.5mm Pitch 2.0mm Height
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
The CAX-AFC24-XIB-H2.0 series connector is a 0.5mm pitch, 2.0mm height FPC (Flexible Printed Circuit) Easy-on Back-flip Right-Angle SMT (Surface Mount Technology) connector. Designed for reliable electrical connections, it features a LCP housing in white and a LCP actuator in black, both with UL94V-0 flammability rating. The connector is suitable for a wide operating temperature range of -55C to +85C and a maximum operating voltage of 50V AC with a current rating of 0.5A DC. Its robust mechanical and environmental performance makes it ideal for various electronic applications requiring secure FPC termination.
Product Attributes
- Brand: DAET
- Manufacturer: (ZHE JIANG CHUANG DU ELECTRONICS CO.,LTD)
- Housing Material: LCP (Liquid Crystal Polymer)
- Housing Color: White
- Housing Flammability Rating: UL94V-0
- Actuator Material: LCP (Liquid Crystal Polymer)
- Actuator Color: Black
- Actuator Flammability Rating: UL94V-0
- Terminal Material: Phosphor Bronze
- Fitting Nail Material: Phosphor Bronze
- Pitch: 0.5mm
- Height: 2.0mm
- Type: FPC Easy-on Back-flip R/A Type 1 SMT Connector
Technical Specifications
| Item | Specification | Test Condition | Requirement |
|---|---|---|---|
| Rating | |||
| Operating Voltage (Max.) | 50V AC | ||
| Current Rating (Max.) | 0.5A DC | *Including temperature rise due to current. | |
| Operating Temperature Range | -55C ~ +85C | ||
| Operating Humidity Range | Relative humidity 90% max. | ||
| Storage Temperature Range | -10C ~ +50C | ||
| Storage Humidity Range | Relative humidity 90% max. | ||
| Electrical Performance | |||
| Contact Resistance | 40 m Max. | Mate applicable FPC and measure by dry circuit, 20mV Max, 10mA. (EIA-364-23) | |
| Insulation Resistance | 500 M Min. | Mate applicable FPC and apply 500V DC between adjacent terminal or ground. (EIA-364-21) | |
| Dielectric Strength | No Breakdown | Mate applicable FPC, apply 250V AC(rms) for 1 minute between adjacent terminal or ground. (EIA-364-20) | |
| Mechanical Performance | |||
| FPC Retention Force | Pos.x 0.30N Min. | Insert the actuator, pull the FPC at a rate of 253mm per minute. | |
| Terminal Retention Force | 3N Min. | Apply axial pull out force at the rate of 253 mm/minute on the terminal assembled in the housing. | |
| Fitting Nail Retention Force | 1.0N Min. | Apply axial pull out force at the rate of 253 mm/minute on the Fitting Nail assembled in the housing. | |
| Environmental Performance and Others | |||
| Durability | Contact Resistance: 60m Max. | Insert and withdraw actuator up to 20 cycles at the speed rate of less than 10 cycles/minute. | |
| Temperature Rise | 30C Max. | Mate applicable FPC and measure the temperature rise of contact when the maximum AC rated current is passed. (EIA-364-70 METHOD 2) | |
| Vibration | Appearance: No Damage Contact Resistance: 60m Max. Discontinuity: 1sec Max. | Mate connectors and subject to vibration conditions (Amplitude: 1.5mm P-P, Frequency: 10~55~10 Hz in 1 minute, Duration: 2 hours in each of X,Y,Z axes), passing DC 1mA. (EIA-364-28 Condition I) | |
| Shock | Appearance: No Damage Contact Resistance: 60m Max. Discontinuity: 1sec Max. | Mate applicable FPC and subject to shock conditions (Peak value: 490m/s {50G}), 3 times of shocks for each of 6 directions along 3 axes, passing DC 1 mA. (EIA-364-27, test condition A) | |
| Heat Resistance | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and expose to 852C for 96 hours. Condition at ambient room conditions for 1-2 hours before measurement. | |
| Cold Resistance | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and expose to -402C for 96 hours. Condition at ambient room conditions for 1-2 hours before measurement. | |
| Humidity | Appearance: No Damage Contact Resistance: 60m Max. Dielectric Strength: No Breakdown Insulation Resistance: 30 M Min. | Mate applicable FPC and expose to 602C, 90-95% RH for 96 hours. Condition at ambient room conditions for 1-2 hours before measurement. | |
| Temperature Cycling | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and subject to 5 cycles of -553C (30 min) and +853C (30 min). Condition at ambient room conditions for 1-2 hours before measurement. | |
| Salt Spray | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and expose to 51% NaCl solution at 352C for 484 hours. Wash with clean water and dry before measurement. | |
| SO2 Gas | Appearance: No Damage Contact Resistance: 60m Max. | Mate applicable FPC and expose to 505 ppm SO2 gas at 402C for 24 hours. | |
| NH3 Gas | Appearance: No Damage Contact Resistance: 60m Max. | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | |
| Solderability (Solder Wetting) | 75% of immersed area must show no voids, pinholes. | Tip of solder tails and fitting nails into molten solder (2455C) up to 0.1mm from housing bottom for 30.5 seconds. | |
| Resistance to Soldering Heat (Soldering Iron Method) | Appearance: No Damage | 0.2mm from terminal tip and fitting nail tip. Soldering time: 5 seconds Max. Solder temperature: 370~400C. | |
Infrared Reflow Condition
Refer to the provided temperature graph for infrared reflow specifications, including pre-heat, peak temperature, and time duration.
Temperature Graph:
(C) 250 | | 230 +------- Peak Temp (250C MAX.) 3sec. or less | 200 | | 150 +------- Pre-Heat (150C MAX.) | 100 | | 50 | +-------------------------------------------- Time(seconds) (60sec) (60~90sec) (30sec) Start
Key Reflow Parameters:
- Pre-Heat Max Temperature: 150C
- Pre-Heat Time: 60~90 seconds
- Soak/Reflow Temperature: 230C MIN. / 20~40 seconds
- Peak Temperature: 250C MAX.
- Peak Time: 3 seconds or less
Usage Instructions & Warnings
Instructions upon usage of ZIF Back-flip Type:
- Step 1: Insert the FPC with the actuator opened.
- Step 2: FPC is totally inserted and not moved. Press the actuator and rotate down to lock.
- Step 3: Lift the actuator, withdraw FPC.
Warnings:
- The rotation angle of the actuator cannot exceed 90 degrees.
- The pressure applied should be average and directed at the center of the actuator.
- Lift the actuator from its center.
- The flatness of the PCB board must be within 0.1mm max.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina