1.0mm Pitch FPC Easy On R A SMT Connector CAX CAX A01 06XCB H2 0 Designed for Wide Temperature Range
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This specification covers the 1.0mm Pitch H=2.0 FPC Easy-on R/A SMT type connectors series. Designed for reliable electrical connections, these connectors feature a flip-top design for easy FPC insertion and extraction. They are constructed with LCP housing and actuator, phosphor bronze terminals, and are suitable for a wide operating temperature range.
Product Attributes
- Brand: DAET
- Manufacturer: ZHE JIANG CHUANG DU ELECTRONICS CO.,LTD
- Housing Material: LCP (White, UL94V-0)
- Actuator Material: LCP (Black, UL94V-0)
- Terminal Material: Phosphor Bronze
- Fitting Nail Material: Phosphor Bronze
- Certifications: UL94V-0 (Flammability Rating)
- Packaging Options: Tube (Small batch), Reel (Batch)
Technical Specifications
| Item | Specification | Test Condition |
|---|---|---|
| Pitch | 1.0mm | - |
| Height | 2.0mm | - |
| Type | FPC Easy-on R/A D/C Type1 SMT Connector | - |
| Operating Voltage (Max.) | 50V AC | - |
| Current Rating (Max.) | 0.5A DC | Includes terminal temperature rise |
| Operating Temperature Range | -55C to +85C | - |
| Operating Humidity Range | 90% RH Max. | - |
| Storage Temperature Range | -10C to +50C | - |
| Storage Humidity Range | 90% RH Max. | - |
| Contact Resistance | 40 m Max. | Mate applicable FPC, 20mV Max, 10mA (EIA-364-23) |
| Insulation Resistance | 500 M Min. | Mate applicable FPC, 500V DC between adjacent terminals or ground (EIA-364-21) |
| Dielectric Strength | No Breakdown | Mate applicable FPC, 250V AC (rms) for 1 minute between adjacent terminals or ground (EIA-364-20) |
| FPC Retention Force | 0.30N Min. (per position) | Insert actuator, pull FPC at 253mm/min |
| Terminal Retention Force | 3N Min. | Axial pull out force at 253mm/min |
| Fitting Nail Retention Force | 1.0N Min. | Axial pull out force at 253mm/min |
| Durability | Contact Resistance: 60m Max. | Insert/withdraw actuator up to 20 cycles at |
| Temperature Rise | 30C Max. | Measure contact point temperature rise at max rated current (EIA-364-70 Method 2) |
| Vibration Resistance | Appearance: No Damage; Contact Resistance: 60m Max.; Discontinuity: 1sec Max. | DC 1mA, 1.5mm displacement, 10-55-10 Hz, 2 hours per axis (X,Y,Z) (EIA-364-28 Condition I) |
| Shock Resistance | Appearance: No Damage; Contact Resistance: 60m Max.; Discontinuity: 1sec Max. | DC 1mA, 490m/s {50G} for 3 times in 6 directions (EIA-364-27, test condition A) |
| Heat Resistance | Appearance: No Damage; Contact Resistance: 60m Max. | Mate FPC, expose to 852C for 96 hours, condition at room temp 1-2 hours |
| Cold Resistance | Appearance: No Damage; Contact Resistance: 60m Max. | Mate FPC, expose to -402C for 96 hours, condition at room temp 1-2 hours |
| Humidity Resistance | Appearance: No Damage; Contact Resistance: 60m Max.; Insulation Resistance: 30 M Min.; Dielectric Strength: No Breakdown | Mate FPC, expose to 602C, 90-95% RH for 96 hours, condition at room temp 1-2 hours |
| Temperature Cycling | Appearance: No Damage; Contact Resistance: 60m Max. | Mate FPC, 5 cycles (-553C 30min / +853C 30min), condition at room temp 1-2 hours |
| Salt Spray | Appearance: No Damage; Contact Resistance: 60m Max. | Mate FPC, 51% NaCl, 352C for 484 hours, wash with clean water, dry |
| SO2 Gas Resistance | Appearance: No Damage; Contact Resistance: 60m Max. | Mate FPC, 505 ppm SO2 gas, 402C for 24 hours |
| NH3 Gas Resistance | Appearance: No Damage; Contact Resistance: 60m Max. | 40 minutes exposure to NH3 gas from 28% Ammonia solution |
| Solderability (Wetting) | 75% of immersed area must show no voids, pin holes. | Immersion in solder at 2455C for 30.5 seconds (0.1mm from housing bottom) |
| Resistance to Soldering Heat (Soldering Iron) | Appearance: No Damage | 0.2mm from terminal tip, 370-400C, 5 seconds Max. |
IR Reflow Temperature Curve
(Refer to attached drawing for detailed graph)
Conditions:
- Pre-Heat: 150C MAX. (60 sec)
- Time above 230C: 20-40 sec
- Peak Temperature: 250C MAX. (3 sec or less)
Usage Instructions (Flip-Top Type)
- Step 1: Use thumb or forefinger to lift the top cover upwards.
- Step 2: Insert FPC with conductive fingers facing down, parallel to the connector.
- Step 3: Lightly press the top cover down and rotate to lock, ensuring the FPC is fully inserted and not moved.
- Step 4: To withdraw FPC, carefully lift the top cover and then withdraw the FPC.
Warnings:
- Rotation angle must not exceed 120 degrees.
- Excessive FPC insertion angle may cause poor conductivity.
- Upward pulling force should not exceed 0.04N/pin max.
- Do not use excessive force when opening the connector cover to avoid touching the terminals.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina