0.5mm Pitch H2.0 FPC Easy On SMT Connectors CAX CAX AFC01 34XCB H2.0 with Phosphor Bronze Terminals
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This specification covers the 0.5mm Pitch H=2.0 FPC Easy-on R/A SMT type connectors series. Designed for reliable electrical connections, these connectors feature a LCP housing and actuator, with phosphor bronze terminals and fitting nails. They are suitable for a wide operating temperature range of -55C to +85C and offer a maximum operating voltage of 50V AC and a current rating of 0.5A DC. The easy-on design facilitates simple insertion and removal of FPC components.
Product Attributes
- Brand: ZHE JIANG CHUANG DU ELECTRONICS CO.,LTD
- Product Series: 0.5mm Pitch H=2.0 FPC Easy-on R/A SMT type connectors
- Housing Material: LCP (White, UL94V-0 Flammability Rating)
- Actuator Material: LCP (Black, UL94V-0 Flammability Rating)
- Terminal Material: Phosphor Bronze
- Fitting Nail Material: Phosphor Bronze
- Pitch: 0.5mm
- Height: 2.0mm
- Type: Easy-on, Right Angle (R/A), SMT
Technical Specifications
| Category | Item | Test Condition | Specification |
|---|---|---|---|
| Rating | Operating Voltage (Max.) | 50V AC | |
| Current Rating (Max.) | 0.5A DC (*) | ||
| Operating Temperature Range | -55C ~ +85C | ||
| Rating | Operating Humidity Range | Relative humidity 90% max. | |
| Storage Temperature Range | -10C ~ +50C | ||
| Rating | Storage Humidity Range | Relative humidity 90% max. | |
| (*) Including terminal temperature rise. | |||
| Electrical Performance | Contact Resistance | Mate applicable FPC, 20mV Max, 10mA (EIA-364-23) | 30 m Max. |
| Insulation Resistance | Mate applicable FPC, 500V DC between adjacent terminals/ground (EIA-364-21) | 500 M Min. | |
| Dielectric Strength | Mate applicable FPC, 250V AC (rms) for 1 minute between adjacent terminals/ground (EIA-364-20) | No Breakdown | |
| Mechanical Performance | FPC Retention Force | Insert actuator, pull FPC at 253mm/min | Pos.x 0.30N Min. |
| Terminal Retention Force | Axial pull out force on terminal in housing at 253mm/min | 3N Min. | |
| Fitting Nail Retention Force | Axial pull out force on fitting nail in housing at 253mm/min | 1.0N Min. | |
| Environmental & Other Performance | Durability | Insert/withdraw actuator up to 20 cycles at | Contact Resistance: 60m Max. |
| Temperature Rise | Measure temp rise at contact point when max rated current passed (EIA-364-70 Method 2) | 30C Max. | |
| Vibration | DC 1mA, 1.5mm displacement, 10~55~10 Hz for 2 hrs in X,Y,Z axes (EIA-364-28 Condition I) | Appearance: No Damage Contact Resistance: 60m Max. Discontinuity: 1sec Max. | |
| Environmental & Other Performance | Shock | DC 1mA, 490m/s {50G} for 3 times in 6 directions (EIA-364-27, Condition A) | Appearance: No Damage Contact Resistance: 60m Max. Discontinuity: 1sec Max. |
| Heat Resistance | Expose to 852C for 96 hrs, then condition at room temp 1-2 hrs | Appearance: No Damage Contact Resistance: 60m Max. | |
| Cold Resistance | Expose to -402C for 96 hrs, then condition at room temp 1-2 hrs | Appearance: No Damage Contact Resistance: 60m Max. | |
| Environmental & Other Performance | Humidity | Expose to 602C, 90-95% RH for 96 hrs, then condition at room temp 1-2 hrs | Appearance: No Damage Contact Resistance: 60m Max. Dielectric Strength: No Breakdown Insulation Resistance: 30 M Min. |
| Temperature Cycling | 5 cycles: -553C (30min) to +853C (30min), then condition at room temp 1-2 hrs | Appearance: No Damage Contact Resistance: 60m Max. | |
| Salt Spray | 51% NaCl solution, 352C for 484 hrs, then wash and dry | Appearance: No Damage Contact Resistance: 60m Max. | |
| Environmental & Other Performance | SO2 Gas | 402C, 505 ppm SO2 for 24 hrs | Appearance: No Damage Contact Resistance: 60m Max. |
| NH3 Gas | 40 minutes exposure to NH3 gas from 28% Ammonia solution | Appearance: No Damage Contact Resistance: 60m Max. | |
| Soldering | Solderability | Immersion in molten solder (2455C) up to 0.1mm from housing bottom for 30.5 sec | Solder Wetting: 75% of immersed area must show no voids, pin holes. |
| Resistance to Soldering Heat | Refer to paragraph 7 for IR reflow. For soldering iron: 0.2mm from terminal tip, 370-400C, 5 sec Max. | Appearance: No Damage | |
Infrared Reflow Condition
Temperature Curve:
- Start (Pre-Heat 150C MAX.)
- 230C MIN./ 20~40sec
- 250C MAX. (Peak Temp) 3sec. or less
- (60sec)
- (60~90sec)
- (30sec)
(Temperature on Board Pattern Side)
Operating Instructions for ZIF Easy-On Type
- Step 1: Use the thumb or the forefinger, raise the top cover up.
- Step 2: FPC gets along with conductivity down. The parallel one inserts it in the connector.
- Step 3: Press the top cover lightly and rotate down to make a reservation, until FPC is totally inserted and not moved.
- Step 4: Lift the top cover carefully, withdraw FPC.
Warnings:
- The whirling angle cannot be greater than 120 degrees.
- When the angle that FPC inserts in is askew, it may cause electrical discontinuity.
- The strength of dragging upwards should not exceed 0.04N/pin max.
- While opening the connector top cover, do not use excessive strength and avoid touching the terminals.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina