USB C TYPE Series Connector FG FG-ST-C-FS-16PLS-5.75 Featuring Stainless Steel Parts and Beige Color
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
USB C TYPE Series Connectors
This specification covers the performance requirements and test methods for USB C TYPE Series Connectors. Designed for reliability and durability, these connectors are suitable for applications requiring robust electrical performance and mechanical resilience. They adhere to specified design, construction, and physical dimensions as detailed in applicable product drawings.
Product Attributes
- Material: LCP Plastic (for housing), Brass (for contacts), Stainless Steel (for unspecified parts)
- Color: Beige (for LCP Plastic)
- Certifications: EU RoHS Directive (EU) 2015/863 compliant
Technical Specifications
| Specification | Details | Test Method / Requirement |
|---|---|---|
| Ratings | ||
| Current Rating | VBUS pins (A4, B4, A9, B9) & GND pins (A1, B1, B12, A12): 5.0A (1.25A/Pin) Other pins: 0.25A/Pin | |
| Temperature Range (Storage) | -20 to +60 | |
| Temperature Range (Operating) | -30 to +80 | |
| Humidity (Max) | 90% Rh max. | |
| Test Conditions | ||
| Temperature Range | +15 to +35 | Unless otherwise specified |
| Humidity Range | 90% Rh max | Unless otherwise specified |
| Electrical Performance | ||
| Low Level Contact Resistance | 40m (Max) at 20mv(max) open circuit at 100mA. Below 50 m after 10000 insertion/extraction cycles. | EIA 364-23 (or MIL-STD-1344A, Method 3002.1, Test Condition B) |
| Insulation Resistance | 100 M Minimum | D.C 500 V applied between adjacent contacts, measured within 1 minute. (EIA 364-21 or MIL-STD-202F, Method 302, Test Condition B) |
| Dielectric Withstanding Voltage | No shortcircuiting and damage at AC 100 V R.M.S for 1 minute. | Test between adjacent contacts of mated and unmated connector assemblies. (EIA 364-20 or MIL-STD-202F, Method 301, Test Condition B) |
| Mechanical Performance | ||
| Insertion Force | 5~20N | Maximum rate of 12.5mm/min. (EIA 364-13) |
| Extraction Force | 8~20N | Maximum rate of 12.5mm/min. (EIA 364-13) |
| Durability | 10000 cycles (max rated 500 cycles/hour) | Mate and unmate Connector assemblies. Flip Interval: Every 2500 cycles. Requirements: No flashover/insulation breakdown, Extraction Force: Initial 8~20N, After 6~20N, Contact Resistance: Max.50m. (EIA 364-09) |
| Mechanical Shock | No discontinuities of 1 microsecond or longer duration. | Subject mated connector to 50Gs half-sine shock pulses of 11msec duration (18 shocks total). (EIA-364-27B) |
| Vibration | No discontinuities of 1 microsecond or longer duration. | Subject mated connectors to 10~55~10Hz traversed in 1 minute at 1.52mm amplitude for 2 hours each in 3 mutually perpendicular planes. (EIA-364-28) |
| Environmental Performance | ||
| Thermal Shock | Shall meet visual requirements, show no physical damage. Shall meet requirements of additional tests. | Ten cycles between 30 to +80. (EIA 364-32, Test Condition I, or MIL-202F, Method 107G Condition A.) |
| Humidity | Shall meet visual requirements, show no physical damage. Shall meet requirements of additional tests. | 96 Hours (Four complete cycles). (EIA 364-31, Test Condition A Method III, or MIL-202F, Method 103B Test Condition B.) |
| Salt Spray | Shall meet visual requirements, show no physical damage. Shall meet requirements of additional tests. | Environment: 35C2C, 95~98%RH, 51% Gas (by weight) for 48 hours. (EIA-364-26B Method 101D, Condition B) |
| Temperature Life | Shall meet visual requirements, show no physical damage. Shall meet requirements of additional tests. | Subject mated connectors to 80 for 250 hours. (EIA 364-17 Test Condition 3 Method A) |
| Solderability | The surface of the portion to be soldered shall be at least 95% covered with new solder coating. | After one hour steam aging. (EIA 364-52) |
| Resistance to Soldering Heat (Wave Soldering) | No mechanical defect on housing or other parts. | Pre-heat: 80, 60 Sec; Temperature: 260 5 ; Immersion duration: 10 1 sec. (MIL-STD-202F, Method 210A, Test Condition B) |
| Resistance to Soldering Heat (Reflow Soldering) | No mechanical defect on housing or other parts. | Pre-heat: 150(Min)~200(Max) , 60 ~180 Sec; Temperature: 260 5 ; Immersion duration: 10~40 sec. (EIAJ RCX-0101/102) |
| RoHS Compliance | ||
| Lead (Pb) | ND (Not Detected) | Limit: 1000 mg/kg (EU RoHS Directive (EU) 2015/863) |
| Mercury (Hg) | ND (Not Detected) | Limit: 1000 mg/kg (EU RoHS Directive (EU) 2015/863) |
| Cadmium (Cd) | ND (Not Detected) | Limit: 100 mg/kg (EU RoHS Directive (EU) 2015/863) |
| Hexavalent Chromium (Cr(VI)) | ND (Not Detected) | Limit: 0.10 g/cm (EU RoHS Directive (EU) 2015/863) |
| Polybrominated Biphenyls (PBBs) | ND (Not Detected) | Limit: 1000 mg/kg (EU RoHS Directive (EU) 2015/863) |
| Polybrominated Diphenyl Ethers (PBDEs) | ND (Not Detected) | Limit: 1000 mg/kg (EU RoHS Directive (EU) 2015/863) |
| Bis(2-ethylhexyl) Phthalate (DEHP) | ND (Not Detected) | Limit: 1000 mg/kg (EU RoHS Directive (EU) 2015/863) |
| Butyl Benzyl Phthalate (BBP) | ND (Not Detected) | Limit: 1000 mg/kg (EU RoHS Directive (EU) 2015/863) |
| Dibutyl Phthalate (DBP) | ND (Not Detected) | Limit: 1000 mg/kg (EU RoHS Directive (EU) 2015/863) |
| Diisobutyl Phthalate (DIBP) | ND (Not Detected) | Limit: 1000 mg/kg (EU RoHS Directive (EU) 2015/863) |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina