USB C TYPE Plug and Receptacle Connectors FG FG-ST-C-24P-CL03-14.3 Suitable for Various Applications

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification covers the requirements for product performance and test methods for USB C TYPE plug and receptacle connectors. Designed for reliable connectivity, these connectors are built to meet stringent industry standards and ensure optimal performance in various applications.

Product Attributes

Brand: (Shenzhen Fugang Technology Co., Ltd.)
Product Type: USB C TYPE Plug and Receptacle Connectors
Origin: China

Technical Specifications

Category	Item	Description	Test Method	Test Specification
General Requirements	Product Appearance	Outward appearance shall be good without injurious problems. Structure shall meet design and dimension requirements of drawing.	EIA364-18	Visual inspection in accordance with each drawing.
General Requirements	Operating Conditions	Temperature Range: Storage: -20C to +60C; Operating: -30C to +80C; Nominal: +20C	N/A	N/A
Mechanical Performance	Insertion Force	5N - 20N	EIA 364-13 (Max rate: 12.5mm/min)	N/A
	Extraction Force	8N - 20N	EIA 364-13 (Max rate: 12.5mm/min)	N/A
	Durability	5000 cycles (Type C) at a rate of 200 cycles/hour (manual). Post-test requirements: Contact resistance (40m max, delta 10m), Insertion force (5N-20N), Extraction force (8N-20N), Visual inspection (no exposed base metal on contacts).	EIA 364-09	N/A
	Cable Flexing	100 cycles in each of 2 planes, 120 degrees. Dimension x = 3.7 x cable diameter. No discontinuity over 1 microsecond. No physical damage allowed.	EIA 364-41	N/A
	Cable Pull-Out	40N steady state axial load for 1 minute. No discontinuity or physical damage allowed. 8N tensile force for 10 seconds (min) at 0, 90, 180, 270 directions. No discontinuity greater than 1s.	EIA-364-38	N/A
Electrical Performance	Insulation Resistance	100m minimum (unmated) between adjacent contacts and contacts and shell.	EIA 364-21C (Apply 100V DC)	N/A
	Low Level Contact Resistance	40m (Max) initial for VBUS/GND, delta 10m (Max) after test.	EIA 364-23b (20mV Max. open circuit at 100mA Max.)	N/A
	Dielectric Withstanding Voltage	No breakdown.	EIA 364-20 (Apply 100VAC (RMS) for 1 minute)	N/A
Current Rating	Contact Current Rating	5.0A for VBUS pins, 1.25A for VCONN pin, 0.25A for other contacts. Temperature rise not to exceed 30C at an ambient temperature of 25C.	EIA364-70	N/A
Environmental Performance	Temperature Life	105C without applied voltage for 120 hours. (Preconditioning: 72 hours at 105C without voltage per EIA 364-1000.01). Post-test: Visual inspection, contact resistance (40m max).	EIA 364-17	N/A
	Thermal Shock	10 Cycles: -55C to +85C. Mated connectors. No evidence of physical damage.	EIA 364-32	N/A
	Cyclic Temperature and Humidity	24 cycles: 25C3C at 80%3%RH and 65C3C at 50%3%RH. Ramp: 0.5 hour, Dwell: 1.0 hour. Test per EIA 364-1000.01.	EIA 364-31	N/A
Soldering	Solderability	Solder coverage minimum 95% of immersed surface.	EIA 364-52 (260C5C, 25.4mm6.35mm/sec for 5s immersion)	N/A
Material Compliance	RoHS Compliance	Pass (Lead, Mercury, Cadmium, Hexavalent chromium, PBBs, PBDEs, DEHP, BBP, DBP, DIBP)	IEC 62321 series	EU RoHS Directive (EU) 2015/863