HRS SMA R A JJ SMA connector featuring stainless steel shell and coupling with high frequency design
Product Overview
The HIROSE HRM Series MIL/IEC Standard SMA Connector offers a reliable and high-performance solution for various applications. Originally developed by HIROSE in 1967, this series is recognized for its enduring reliability and adherence to MIL-C-39012 and IEC 60169-15 standards. Key features include high-frequency performance due to a design that compensates for discontinuous transmission line capacity, a compact and lightweight yet robust construction with stainless-steel shells, and a proven history of reliability across consumer electronics, defense, communications, and aerospace industries. The series also offers variations like the excellence impedance matching type HRM(G) and the reverse-type SMA(R), catering to diverse needs.
Product Attributes
- Brand: HIROSE
- Series: HRM
- Applicable Standards: MIL-C-39012, IEC 60169-15
- Certifications: RoHS2 Compliant
- Material (Shell): Stainless Steel
- Material (Coupling): Stainless Steel
- Material (Female Contact): Beryllium steel
- Material (Male Contact): Brass
- Material (Insulator): PTFE
- Material (Gasket): Silicone rubber
- Material (Boot): Polyolefin
- Finish (Shell): Gold Plating, Passivated
- Finish (Coupling): Gold Plating, Passivated
- Finish (Crimp Sleeve): Nickel Plating
- Finish (Right Angle Type): Nickel Plating
Technical Specifications
| Specification | Value | Conditions |
|---|---|---|
| Nominal Characteristic Impedance | 50 | |
| Operating Temperature | -55 to +125 | |
| Rated Voltage | 330V AC | |
| Operating Relative Humidity | 85 Max. | |
| Frequency Range | 0 to 18GHz | (Note) Ratings and standards may vary by products. |
| Contact Resistance | 4m Max. | Measured at 100mA Max. |
| Insulation Resistance | 5000M Min. | Measured at DC 500V |
| Withstanding Voltage | 1000V AC for 60 sec. | No insulation breakdown |
| V.S.W.R. | See below | See below |
| Female Contact Extraction Force | 1.5N Min., 0.3N Min. | Measured with 0.910 pin gauge, Measured with 0.9017 pin gauge |
| Center Contact Fixed Torque | 16.7mNm Min. | Measured with Applicable Connector |
| Coupling Tightening Torque | 0.6 to 1.0Nm | Measured with Applicable Connector |
| Coupling Fixed Strength | 490N Min. | Measured with Applicable Connector |
| Mating Durability | Contact Resistance : 6m Max. | 1000 times |
| Vibration Resistance | No electrical discontinuity of 1 s or more, No damage, cracks, or parts dislocation | Frequency : 10 to 2000Hz, Half amplitude : 0.75mm, Acceleration : 196m/s, 4 hours in each of the 3 axis |
| Shock Resistance | No electrical discontinuity of 1 s or more, No damage, cracks, or parts dislocation | Acceleration : 1960m/s, Duration : 6ms, Wave form : Half-sine wave, 3 times in each of the 3 axis |
| Humidity | Insulation Resistance : 100M Min. (in a high humidity environment), Insulation resistance : 1000M Min. (in a dry environment) | Left for 10 cycles (240 hours) in an environment with the temperature ranging from +25 to 65 and the humidity ranging from 90 to 98%. |
| Heat Shock Resistance | No damage, cracks, or parts dislocation | (65 : 30 min. 5 to 35 : within 5 min. 125 2 : 30 min. 5 to 35 : within 5 min. 5 cycles |
| Corrosion Resistance | Satisfying the V.S.W.R Standard | Continuous 48 hour cycle in 5% salt water solution |
Applications
Cable or radio communication equipment, broadcasting equipment, radar equipment, for in-flight wiring in electronic measuring device, for connection between units and contact for input and output of equipment configuration.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.