2.54mm Pin Header Connector Solutions Including Ckmtw B-2100R03P-A110 for Single and Double Row Pins
Product Overview
This specification covers the 2.54mm Pin Header spacing Connector series, including single-row straight pins, single-row right-angle pins, double-row straight pins, double-row right-angle pins, and surface mount variants. These connectors are designed for various electrical applications with rated voltage and current capabilities.
Product Attributes
- Brand: SHENZHEN CANKEMENG INDUSTRAIAL CO.LTD
- Origin: China
- Production Base: JIANGXI CANKEMENG ELECTRONICS CO.LTD
- Company Address (Shenzhen): Building 5, No. 36, Lihu Community, Xinhu Street, Guangming District, Shenzhen
- Company Address (Jiangxi): Putian Industrial Zone, Zhajin Town, Xiushui County, Jiujiang City, Jiangxi Province
- Contact Tel: 0755-81488157
- Contact Fax: 0755-83425987
- Contact Email: ckmtw168@163.com, ckm-scb@ckmtw.com.cn
Technical Specifications
| Product Name | Part Number | Rated Voltage (Max) | Rated Current (Max) | Ambient Temperature |
|---|---|---|---|---|
| Single Row Straight Pin | 210S-1*XP | 250V AC/DC | 3A | -40-+105 |
| Single Row Right-Angle Pin | 210R-1*XP | 250V AC/DC | 3A | -40-+105 |
| Double Row Straight Pin | 210S-2*XP | 250V AC/DC | 3A | -40-+105 |
| Double Row Right-Angle Pin | 210R-2*XP | 250V AC/DC | 3A | -40-+105 |
| Single Row Surface Mount | 210SMT-1*XP | 250V AC/DC | 3A | -40-+105 |
| Double Row Surface Mount | 210SMT-2*XP | 250V AC/DC | 3A | -40-+105 |
| Item | Test Condition | Requirement |
|---|---|---|
| 3.1 Electrical Performance | ||
| Contact Resistance | Mate connectors, reassure by dry circuit, 20mV MAX, 10mv. (Based upon JIS C5402 5.4) | 0.02 (MAX) |
| Insulation Resistance | Mate connectors, apply 500V DC between adjacent terminal or ground. (Based upon JIS C5402 5.2/MIL-STD-202 method 302 condition B) | 1000 M (MIN) |
| Dielectric Strength | Mate connectors, apply 500V AC for 1 minute between adjacent terminal or ground. (Based upon JIS C5402 5.1/MIL-ST-202 Method 301) | No breakdown and flashover |
| 3.2 Mechanical Performance | ||
| Insertion Force and Withdrawal Force (Whole Connector) | Insert and withdraw connectors at the speed rate of 253mm/minute. Mated 30 times. | Insertion Force: 0.2 kg/Pin (MAX), Withdrawal Force: 0.02 kg/Pin (MIN) |
| Pin Insertion Force (Single Pin) | Insert the crimped terminal into the connectors. | 1.5 kg/Pin (MAX) |
| Pin Retention Force (Single Pin) | Apply axial push force at the speed rate of 253mm/minute. | 0.5 kg/Pin (MIN) |
| 3.3 Environmental Performance and Others | ||
| Contact Resistance (After Repeated Insertion/Withdrawal) | When mated up to 30 cycles repeatedly by the rate of 10 cycles per minute. | 40m MAX |
| Salt Spray | 24 hours exposure to a salt spray from the 51% solution at 352. (Based upon JIS C5402/MIL-STD-202 method 101D conditions. B) | Appearance: No Damage, Contact Resistance: 40m MAX |
| Solderability | Soldering time: 30.5sec, solder temperature: 2305 | 95% solderable area |
| Resistance to Soldering Heat | Soldering time: 51sec, solder temperature: PBT: 2205, PA6T: 2605, PA9T: 2705 | No Damage |
| Life Test | 500 cycles | Appearance and function: No Damage |
Note: The above tests are subject to the company's testing conditions/capabilities.
Product Shape, Dimensions and Materials: Refer to attached drawings.
Packaging, Transportation, and Storage:
Packaging: Inner packaging is blister tray, outer packaging is carton. Products are sealed in the box without shaking.
Transportation: Any mode of transportation is allowed, but avoid direct rain, snow, and mechanical damage.
Storage:
- Connectors should be stored in a warehouse with ambient temperature of -10~40, relative humidity not greater than 80%, and no acidic, alkaline, or other corrosive gases in the surrounding air.
- The storage period for this product is 12 months. Re-inspection is required after 12 months. It is most suitable to use within 3 months. The company is not responsible for any abnormalities found if used beyond the storage period.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.