Ckmtw B2100R16PA110 254mm Pin Header Connector Series Offering Electrical And Mechanical Performance

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification covers the 2.54mm Pin Header spacing Connector series. It details the product's electrical, mechanical, and environmental performance, along with dimensions, materials, and packaging requirements.

Product Attributes

Brand: SHENZHEN CANKEMENG INDUSTRAIAL CO.LTD
Origin: China
Production Base: JIANGXI CANKEMENG ELECTRONICS CO.LTD
Company Address (Jiangxi): Putian Industrial Zone, Zhajin Town, Xiushui County, Jiujiang City, Jiangxi Province
Company Address (Shenzhen): Building 5, No. 36, Lihu Community, Xinhu Street, Guangming District, Shenzhen
Contact Tel: 0755-81488157
Contact Fax: 0755-83425987
Contact Email: ckmtw168@163.com, ckm-scb@ckmtw.com.cn

Technical Specifications

Product Name	Part Number	Rated Voltage (Max)	Rated Current (Max)	Ambient Temperature
2.54mm Pin Header Series	B-2100RXXP-A110	250V AC/DC	3A	-40-+105

Item	Test Condition	Requirement
3.1 Electrical Performance
Contact Resistance	Mate connectors, reassure by dry circuit ,20mV MAX,10mv. (Based upon JIS C5402 5.4)	0.02 (MAX)
Insulation Resistance	Mate connectors, apply 500V DC between adjacent terminal or ground. (Based upon JIS C5402 5.2/MIL-STD-202 method 302 condition B)	1000 M (MIN)
Dielectric Strength	Mate connectors, apply 500V AC for 1 minute between adjacent terminal or ground. (Based upon JIS C5402 5.1/MIL-ST-202 Method 301)	No breakdown and flashover
3.2 Mechanical Performance
Insertion Force and Withdrawal Force (Whole Connector)	Insert and withdraw connectors at the speed rate of 253mm/minute. Mated 30 cycles.	Insertion Force: 0.2 kg/Pin (MAX) Withdrawal Force: 0.02 kg/Pin (MIN)
Pin Insertion Force (Single Pin)	Insert the crimped terminal into the connectors.	1.5 kg/Pin (MAX)
Pin Retention Force (Single Pin)	Apply axial push force at the speed rate of 253mm/minute.	0.5 kg/Pin MIN
3.3 Environmental Performance and Others
Contact Resistance (After Repeated Insertion/Withdrawal)	When mated up to 30 cycles repeatedly by the rate of 10 cycles per minute.	40m MAX
Salt Spray	24 hours exposure to a salt spray from the 51% solution at 352. (Based upon JIS C5402/MIL-STD-202 method 101D conditions. B)	Appearance: No Damage Contact Resistance: 40m MAX
Solderability	Soldering time: 30.5sec, solder temperature: 2305	95% or more solderable area
Resistance to Soldering Heat	Soldering time: 51sec, solder temperature: PBT: 2205, PA6T: 2605, PA9T: 2705	No Damage
Life Test	500 cycles	Appearance and function: No Damage

Note: The above tests are subject to the company's test conditions/capabilities.

Product Shape, Dimensions and Materials: Refer to attached drawings.

Packaging, Transportation and Storage:

Packaging: Inner packaging is blister box, outer packaging is carton. Products are sealed in the box without shaking.
Transportation: Any mode of transportation is allowed, but avoid direct rain, snow, and mechanical damage.
Storage:

Connectors should be stored in a warehouse with ambient temperature of -10~40, relative humidity not greater than 80%, and no acidic, alkaline, or other corrosive gases in the surrounding air.
The product's shelf life is 12 months. Re-inspection is required after 12 months. It is recommended to use within 3 months. The company is not responsible for any abnormalities found if used beyond the storage period.