2.54mm pitch dual row right angle pin header connector rated 250V max voltage Ckmtw B-2100R38P-B110

Name: 2.54mm pitch dual row right angle pin header connector rated 250V max voltage Ckmtw B-2100R38P-B110
Brand: Hefei Purple Horn E-Commerce Co., Ltd.

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification covers the 2.54mm Pin Header spacing connector series. It includes dual-row right-angle pin headers.

Product Attributes

Brand: SHENZHEN CANKEMENG INDUSTRIAL CO. LTD
Origin: Made in China (Production Base: JIANGXI CANKEMENG ELECTRONICS CO.LTD)
Materials: Not explicitly specified beyond general connector components.
Certifications: None explicitly mentioned.

Technical Specifications

Item	Specification	Requirement/Standard
2. Ratings and Ambient Temperature
Rated Voltage (Max)	250V AC/DC	-
Rated Current (Max)	3A	-
Ambient Temperature	-40-+105	-
3. Performance Tests
3-1. Electrical Performance
Contact Resistance	Mate connectors, reassure by dry circuit, 20mV MAX, 10mv. (Based upon JIS C5402 5.4)	0.02 (MAX)
Insulation Resistance	Mate connectors, apply 500V DC between adjacent terminal or ground. (Based upon JIS C5402 5.2/MIL-STD-202 method 302 condition B)	1000 M (MIN)
Dielectric Strength	Mate connectors, apply 500V AC for 1 minute between adjacent terminal or ground. (Based upon JIS C5402 5.1/MIL-ST-202 Method 301)	No breakdown and flashover
3-2. Mechanical Performance
Insertion force and withdrawal force (Whole set)	Insert and withdraw connectors at the speed rate of 253mm/minute. Mated 30 cycles.	Insertion Force: 0.2 kg/Pin (MAX), Withdrawal Force: 0.02 kg/Pin (MIN)
Pin Insertion force (Single Pin)	Insert the crimped terminal into the connectors.	1.5 kg/Pin (MAX)
Pin retention force (Single Pin)	Apply axial push force at the speed rate of 253mm/minute.	0.5 kg/Pin MIN
3-3. Environmental Performance and Others
Repeated insertion/withdrawal (Contact Resistance)	When mated up to 30 cycles repeatedly by the rate of 10 cycles per minute.	40m MAX
Salt spray	24 hours exposure to a salt spray from the 51% solution at 352. (Based upon JIS C5402/MIL-STD-202method 101D conditions. B)	Appearance: No Damage, Contact Resistance: 40m MAX
Solderability	Soldering time: 30.5sec, solder temperature: 2305	95% or more solder coverage area
Resistance to soldering heat	Soldering time: 51sec, solder temperature: PBT: 2205, PA6T: 2605, PA9T: 2705	No Damage to appearance
Life Test	500 cycles	No Damage to appearance and function
4. Product Shape, Dimensions and Materials
Refer to attached drawings.
5. Packaging, Transportation and Storage
5.1 Packaging: Inner packaging is blister box, outer packaging is carton. Products sealed in the box without shaking.
5.2 Transportation: Allowed by any means, but avoid direct rain/snow and mechanical damage.
5.3 Storage:
5.3.1: Store in a warehouse with ambient temperature of -10~40, relative humidity not greater than 80%, and no acidic, alkaline, or other corrosive gases in the surrounding air.
5.3.2: Storage period is 12 months. Re-inspection is required after 12 months. Best used within 3 months. The company is not responsible for any abnormalities found when used beyond the storage period.