0.8mm Pitch Pressure Type Bar Connector Ckmtw W-0800M12P-R000 Ensuring Stable Electrical Connections
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
0.8mm pitch pressure-type bar connectors designed for wire-to-board applications. These connectors offer reliable electrical connections with specific ratings for voltage, current, and operating temperature.
Product Attributes
- Brand: (SHENZHEN CANKEMENG INDUSTRAIAL CO.LTD)
- Product Name: /SUH0.8/0.8mm/
- Part Number: W-0800MXXP-R000
- Manufacturing Base: (JIANGXI CANKEMENG ELECTRONICS CO.LTD)
- Company Address (Jiangxi):
- Company Address (Shenzhen): 5 36
- Contact Tel: 0755-81488157
- Contact Fax: 0755-83425987
- Contact Email: ckmtw168@163.com, ckm-scb@ckmtw.com.cn
- Housing Material: LCP (Natural Color)
- Contact Material: Phosphor Copper
- Welding Slice Material: Phosphor Copper
- Plating: Nickel Base, High Tin
Technical Specifications
| Item | Specification | Requirement |
| Ratings and Applicable Wires | ||
| Rated Voltage (MAX) | [AC(rms)/DC] | 50V |
| Insulation O.D. | Outer Diameter: 0.5-0.6mm | |
| Rated Current (MAX) | AWG#30 | 0.5A |
| Rated Current (MAX) | AWG#32 | 0.5A |
| Ambient Temperature Range | -25 +85 | |
| Performance - Electrical | ||
| Contact Resistance | Measure by dry circuit, 20mV MAX, 10mA | 20 milliohms MAX |
| Insulation Resistance | Apply 100V DC between adjacent terminals or ground | 100 Megohms MIN |
| Dielectric Strength | Apply 200V AC (rms) for 1 minute between adjacent terminals or ground | No Breakdown |
| Contact Resistance On Crimped Portion | Measure by dry circuit, 20mV MAX, 10mA | 5 milliohms MAX |
| Performance - Mechanical | ||
| Contact Retention Force (Min.) | Apply axial pull out force at a speed of 253mm/minute | 4-7N MIN |
| Terminal /Housing Retention Force | Apply axial pull out force at a speed of 253mm/minute | 4-7N MIN |
| Contact Insertion Force | Insert and withdraw connectors with hand | 1-2N/PIN |
| Contact Withdrawal Force | Insert and withdraw connectors with hand | 0.3N/PIN |
| Performance - Environmental and Others | ||
| Repeated Insertion and Withdrawal | 20 cycles at a speed rate of less than 10 cycles/minute | Contact Resistance: 60 mMAX |
| Temperature Rise | Carrying rated current load (UL 498) | 30 MAX |
| Vibration | Amplitude: 5mm P-P, Sweep time: 10-55-10Hz/min, Duration: 2 hours in each X,Y,Z axes, DC 1mA energized | Appearance: No Damage, Contact Resistance: 60 mMAX, Discontinuity: 1 ms.MAX. |
| Shock | 490m/s {50G}, 3 strokes in each X,Y,Z axes, DC 1mA energized | Appearance: No Damage, Discontinuity: 1 ms.MAX. |
| Heat Resistance | 852 for 96 hours, then return to room temperature for 1-2 hours | Appearance: No Damage, Contact Resistance: 60 mMAX |
| Cold Resistance | -402 for 96 hours, then return to room temperature for 1-2 hours | Appearance: No Damage, Contact Resistance: 60 mMAX |
| Humidity | 402, 90-94% RH for 96 hours, then return to room temperature for 0.5 hours | Appearance: No Damage, Contact Resistance: 60 mMAX, Dielectric Strength: Must meet 4.1.3, Insulation Resistance: 20 M MIN |
| Temperature Cycling | 5 cycles of: -253 for 30 minutes, then 852 for 30 minutes, with intermediate room temp stabilization | Appearance: No Damage, Contact Resistance: 60 mMAX |
| Salt Spray | 24 hours exposure to a salt spray from 51% solution at 352. Followed by room temp water wash and drying. | Appearance: No Damage, Corrosion, Contact Resistance: 60 mMAX |
| SO2 Gas Resistance | 24 hours exposure to 505ppm SO2 gas at 402. | Contact Resistance: 60 mMAX |
| NH3 Gas Resistance | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution. | Appearance: No Damage, Contact Resistance: 60 mMAX |
| Solderability | Immersion at 2355 for 20.5 sec, 0.2 mm from terminal tip. | Solder Wetting Area: More Than 95% |
| Resistance to Soldering Heat | Immersion at 2555 for 50.5 sec, 0.2 mm from terminal tip. | Appearance: No Damage, Deformation |
| Conditions for Soldering (Pb-free) | ||
| Preheating Average Temperature Gradient | 2.5C/s | |
| Soak Time (tsoak) | Time above 150C (T1) | 2-3 minutes |
| Time above 180C (T2) | 60s | |
| Time above 250C (T3) | 50s | |
| Peak Temperature (Tpeak) | 2-5s | |
| Cooling Temperature Gradient | 255C (0/+5C) Max -5C/s | |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina