Durable hanxia HX IPEX 4.0-4P connector providing connectivity for electronic communication systems

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Shenzhen Hanxia Electronic Co., Ltd. - HX IPEX 4.0-4P Connector Specification

This document outlines the specifications for the HX IPEX 4.0-4P connector manufactured by Shenzhen Hanxia Electronic Co., Ltd. It details the application conditions, environmental requirements, electrical ratings, and comprehensive test procedures to ensure product performance and reliability.

Product Attributes

Brand: HX
Origin: Shenzhen Hanxia Electronic Co., Ltd.
Model: IPEX 4.0-4P
Certifications: SGS (for environmental compliance)

Technical Specifications

Item	Requirements	Test Method
Application Conditions
Operating Environment	Temperature: -40C to +90C, Relative Humidity: 25%~85% (Without loss of function)
Storage Environment	Temperature: -55C to +100C, Relative Humidity: 95% or Less (Without loss of function)
Ratings
Voltage Rating	60VAC
Nominal Characteristic Impedance	50
Frequency	DC0.1~6GHz
VSWR (Plug)	1.3 Max. (DC0.1~3GHz), 1.5 Max. (3~6GHz)
VSWR (Receptacle)	1.3 Max. (DC0.1~3GHz), 1.4 Max. (3~6GHz)
Test Requirements and Methods
Product Appearance	All components shall be properly assembled and free of burrs, warps, scratches, broken chips, and other abnormalities.	EIA 364-18B
Low Level Contact Resistance	Initial: 20m Max. Final: 70m Max.
Insulation Resistance	Initial: 500 M Min. Final: 100 M Min.	EIA-364-21D (Apply 100V DC for 1 minute between adjacent contacts)
Dielectric Withstanding Voltage	Current leakage: 0.50 mA Max. No evidence of breakdown or flash burn.	EIA-364-20D, Method B (Apply 300V AC for 1 minute on tested plug and connectors)
VSWR	Frequency: 100M~6GHz	Measure using network analyzer
Un-mating Force	Initial: 5N Min. After 30 cycles: 3N Min.	Push-on/pull-off machine at 253mm/min
Crimp Strength	5N MIN	Tensile strength machine at 253mm/min
Durability	Center conductor contact resistance: Initial 20m MAX, after testing 40m MAX. Ground contact resistance: Initial 20m MAX, after testing 40m MAX. Appearance: No abnormality.	Mate and un-mate 30 cycles at 253mm/min. EIA 364-09C.
Cable Retention Force	Center conductor contact resistance: Initial 20m MAX, after testing 40m MAX. Ground contact resistance: Initial 20m MAX, after testing 40m MAX. Electrical discontinuity: No electrical discontinuity greater than 1 micro-sec.	Apply force on cable. Run 100mA DC during testing.
Vibration	Appearance: No abnormality. Electrical discontinuity: No electrical discontinuity greater than 1 micro-sec. Center conductor contact resistance: Initial 20m MAX, after testing 40m MAX. Ground contact resistance: Initial 20m MAX, after testing 40m MAX.	Frequency: 10Hz-100Hz-10Hz/approx 20 minutes. Half amplitude, peak acceleration: 1.5mm or 59m/s(6G). 3 directions. Run 100mA DC. EIA-364-28E.
Physical Shock	Appearance: No abnormality. Electrical discontinuity: No electrical discontinuity greater than 1 micro-sec. Center conductor contact resistance: Initial 20m MAX, after testing 40m MAX. Ground contact resistance: Initial 20m MAX, after testing 40m MAX.	Peak acceleration: 735m/s(75G). Duration: 11msec. Half sinusoidal waveform. 6 directions. Run 100mA DC. EIA-364-27B.
Humidity	Appearance: No abnormality. Center conductor contact resistance: Initial 20m MAX, after testing 40m MAX. Ground contact resistance: Initial 20m MAX, after testing 40m MAX. Insulation resistance: Initial 500M MIN, after testing 100M MIN. D.W.Voltage: No creeping discharge, flashover, nor insulator breakdown.	Temperature: 402C, Humidity: 90~95%RH, Duration: 96 hours. EIA-364-31C, Method II, Condition A.
Thermal Shock	Appearance: No abnormality. Center conductor contact resistance: Initial 20m MAX, after testing 40m MAX. Ground contact resistance: Initial 20m MAX, after testing 40m MAX. Insulation resistance: Initial 500M MIN, after testing 100M MIN. D.W.Voltage: No creeping discharge, flashover, nor insulator breakdown.	Cycles: -55C (30 min) 85C (30 min). Transition time: 5 min Max. 5 cycles. EIA-364-32E.
High Temperature Life	Appearance: No abnormality. Center conductor contact resistance: Initial 20m MAX, after testing 40m MAX. Ground contact resistance: Initial 20m MAX, after testing 40m MAX.	Temperature: 902C, Duration: 96 hours. EIA-364-17B.
H2S Gas Test	Appearance: No abnormality. Center conductor contact resistance: Initial 20m MAX, after testing 40m MAX. Ground contact resistance: Initial 20m MAX, after testing 40m MAX.	Temperature: 402C, Humidity: 805%RH, Gas: H2S 31ppm, Duration: 96 hours.
Salt Spray Test	Appearance: No abnormality. Center conductor contact resistance: Initial 20m MAX, after testing 40m MAX. Ground contact resistance: Initial 20m MAX, after testing 40m MAX.	Temperature: 352C, Salt water density: 51% (by weight), Duration: 48 hours. EIA-364-26B, Method 101, Condition B.
Solder Ability	Appearance: No abnormality. Performance: Good.	Reflow profile: Number of times 2.