1.0mm Pitch FPC FFC Connectors hanxia HX 1.0-8P XGXJ-H2.0 with Electrical and Mechanical Reliability
Price:
Negotiable
MOQ:
Negotiable
Delivery Time:
Negotiable
Product Description
Product Overview
This specification covers the 1.0mm Pitch FPC/FFC Connectors, designed for flexible flat cable connections. They are suitable for applications requiring reliable electrical and mechanical performance under various environmental conditions.
Product Attributes
- Brand: Shenzhen Hanxia Electronic Co., Ltd
- Origin: Shenzhen, China
- Certifications: UL 94V-0 (for LCP materials)
Technical Specifications
| Item | Requirement | Test Condition |
| Rated Voltage (MAX) | 50V [AC/DC( Virtual value)50Hz] | |
| Rated Current (MAX) | 0.5A | |
| Ambient temperature Range | -25~ +85 | |
| Contact Resistance | 30 mMAX | Mate applicable FPC/FFC and measure by dry circuit20mV MAX 10mA. |
| Insulation Resistance | 500MMIN | Mate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground. |
| Dielectric Strength | No Breakdown | Mate applicable FPC/FFC and apply 250V AC virtual value for 1minute between adjacent terminal or ground. |
| Locking Force (MAX) | 1.96*n (N) | Insert and extract applicable FFC at the speed rate of 253mm/minute. |
| Withdrawal Force (MIN) | 0.49*n (N) | Insert and extract applicable FFC at the speed rate of 253mm/minute. |
| Terminal /Housing Retention Force (MIN) | 0.25N | Pull the terminal at the speed rate of 25 3mm per minute |
| Contact Resistance (after Repeated Insertion) | 60 m MAX | Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute |
| Temperature Rise (MAX) | 30 | Carrying rated current load.UL 498 |
| Contact Resistance (after Vibration) | 60 m MAX | Vibration 10-55-10Hz/min; Amplitude1.5mm P-P; Duration2 hours in each X.Y.Z. axes; DC 1mA current. |
| Discontinuity (after Vibration) | 1 ms MAX. | Vibration 10-55-10Hz/min; Amplitude1.5mm P-P; Duration2 hours in each X.Y.Z. axes; DC 1mA current. |
| Appearance (after Shock) | No Damage | 490m/s2{50G}, 3 strokes in each X.Y.Z. axes. |
| Discontinuity (after Shock) | 1 ms MAX. | 490m/s2{50G}, 3 strokes in each X.Y.Z. axes. |
| Appearance (after Heat Resistance) | No Damage | 852, 96 hour |
| Contact Resistance (after Heat Resistance) | 60 m MAX | 852, 96 hour |
| Appearance (after Cold Resistance) | No Damage | -402, 96 hour |
| Contact Resistance (after Cold Resistance) | 60 m MAX | -402, 96 hour |
| Appearance (after Humidity) | No Damage | Temperature402 Relative Humidity90-95%; Duration96 Hours |
| Contact Resistance (after Humidity) | 60 m MAX | Temperature402 Relative Humidity90-95%; Duration96 Hours |
| Insulation Resistance (after Humidity) | 20 M MIN | Temperature402 Relative Humidity90-95%; Duration96 Hours |
| Appearance (after Temperature Cycling) | No Damage | 5 cycles ofa) -553 30 minutes b) 852 30 minutes |
| Contact Resistance (after Temperature Cycling) | 60 m MAX | 5 cycles ofa) -553 30 minutes b) 852 30 minutes |
| Appearance (after Salt Spray) | No Damage, No Corrosion | 244 hours exposure to a salt spray from the 51% solution at 352. |
| Contact Resistance (after Salt Spray) | 60 m MAX | 244 hours exposure to a salt spray from the 51% solution at 352. |
| Contact Resistance (after SO2 Gas) | 60 m MAX | 24 hours exposure to 50 5ppm. SO2 gas at 402. |
| Appearance (after NH3 Gas) | No Damage | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution |
| Contact Resistance (after NH3 Gas) | 60 m MAX | 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution |
| Solder Wetting | 95% | Soldering Time20.5 sec. Soldering Temperature2455 0.2 mm from terminal tip |
| Appearance (after Soldering Heat) | No Damage, No Deformation | Soldering Time305 sec. Soldering Temperature2455 |
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hefei Purple Horn E-Commerce Co., Ltd.
Location
Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person
Sellina