0.5mm pitch locking FPC FFC connector hanxia HX 0.5-6PQFHY-H2.0 for electronic flexible flat cable

Price Negotiable
Price: Negotiable
MOQ: Negotiable
Delivery Time: Negotiable
Product Description

Product Overview

This specification covers the 0.5mm Pitch FPC/FFC Connectors (series Locking). Designed for flexible flat cable connections, these connectors offer a secure locking mechanism suitable for various electronic applications.

Product Attributes

  • Brand: Shenzhen Hanxia Electronic Co., Ltd
  • Origin: China
  • Certifications: UL 94V-0 (for LCP material)

Technical Specifications

ItemSpecificationTest ConditionRequirement
Electrical Performance
Contact ResistanceMate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA.≤20 mΩ MAX
Insulation ResistanceMate applicable FPC/FFC and apply 500V DC between adjacent terminal or ground.500MΩ MIN
Dielectric StrengthMate applicable FPC/FFC and apply 200V AC (virtual value) for 1minute between adjacent terminal or ground.No Breakdown
Mechanical Performance
Locking and Withdrawal ForceInsert and extract applicable FFC at the speed rate of 25±3mm/minute.Locking: 1.96*n (N) MAX
Withdrawal: 0.49*n (N) MIN
Terminal /Housing Retention ForcePull the terminal at the speed rate of 25 ± 3mm per minute3.92N MIN
Environmental Performance and Others
Repeated Insertion and WithdrawalInsertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minuteContact Resistance: ≤60 mΩ MAX
Temperature RiseCarrying rated current load. (UL 498)30 ℃ MAX
VibrationDC 1mA energized state; Vibration along XYZ three directions; Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each X.Y.Z. axesAppearance: No Damage
Contact Resistance: ≤60 mΩ MAX
Discontinuity: 1 ms MAX.
ShockDC 1mA energized state; 490m/s2{50G}, 3 strokes in each X.Y.Z. axes.Appearance: No Damage
Discontinuity: 1 ms MAX.
Heat ResistanceMate applicable FPC/FFC; Place in 85±2℃ air for 96 hours; then return to room temperature for 1-2 hours.Appearance: No Damage
Contact Resistance: ≤60 mΩ MAX
Cold ResistanceMate applicable FPC/FFC; Place in -40±2℃ air for 96 hours; then return to room temperature for 1-2 hours.Appearance: No Damage
Contact Resistance: ≤60 mΩ MAX
HumidityMate applicable FPC/FFC; Place in 40±2℃, 90-95% RH air for 96 hours; measure within 0.5 hours after returning to room temperature.Appearance: No Damage
Contact Resistance: ≤60 mΩ MAX
Dielectric Strength: Must meet 4.1.3
Insulation Resistance: 20 MΩ MIN
Temperature Cycling5 cycles of: a) -55±3℃ 30 minutes b) 85±2℃ 30 minutes (with 10-15 minutes at room temp between cycles)Appearance: No Damage
Contact Resistance: ≤60 mΩ MAX
Salt SprayMate applicable FPC/FFC; 24 ± 4 hours exposure to a salt spray from the 5±1% solution at 35±2℃.Appearance: No Damage, Corrosion
Contact Resistance: ≤60 mΩ MAX
SO2 GasMate applicable FPC/FFC; 24 hours exposure to 50±5ppm SO2 gas at 40±2℃.Contact Resistance: ≤60 mΩ MAX
NH3 GasMate applicable FPC/FFC; 40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.Appearance: No Damage
Contact Resistance: ≤60 mΩ MAX
SolderabilitySoldering Time: 2±0.5 sec. Soldering Temperature: 245±5℃ (0.2 mm from terminal tip)Solder Wetting: ≥95% area
Resistance to Soldering HeatSoldering Time: 30±5 sec. Soldering Temperature: 245±5℃ (in hot air oven)Appearance: No Damage, Deformation
Product Name and Part Number
Product NameFFC/FPC Flat Cable Connector
Part NumberHX 0.5-6PQFHY-H2.0
Ratings
Rated Voltage (MAX)50V [AC/DC (virtual value) 50Hz]
Rated Current (MAX)0.5A
Ambient Temperature Range-25℃+85℃
Product Shape, Dimensions and Materials
Main bodyLCP UL 94V-0
Housing LockLCP UL 94V-0
TerminalPhosphor BronzeSurface plated gold
ContactPhosphor BronzeSurface plated gold

Get in Touch

Have questions about our products or want to discuss a custom order? Our team is ready to help you.

Company Hefei Purple Horn E-Commerce Co., Ltd.
Location Room 1306B, Building A, Xindi Center, Qimen Road, Hefei City, Anhui Province
Contact Person Sellina

Request A Quote

Please check your email address.
Your message must be at least 20 characters.