Connector for flexible flat cable hanxia HX FPC 0.5-18P LTH2.0 0.5mm pitch electrical performance

Price Negotiable

Price: Negotiable

MOQ: Negotiable

Delivery Time: Negotiable

Product Description

Product Overview

This specification covers the 0.5mm Pitch FPC/FFC Connectors (HX FPC 0.5-18P LTH2.0) from Shenzhen Hanxia Electronic Co., Ltd. These connectors are designed for flexible flat cable applications.

Product Attributes

Brand: HX FPC
Origin: Shenzhen Hanxia Electronic Co., Ltd.
Certifications: UL 94V-0 (for LCP material)
Material: Main body: LCP UL 94V-0; Housing Lock: LCP UL 94V-0; Terminal/Contact: Phosphor Bronze (tin-plated)

Technical Specifications

Item	Specification/Requirement	Test Condition
Ratings
Rated Voltage (MAX)	50V [AC/DC(Virtual value)50Hz]
Rated Current (MAX)	0.5A
Ambient temperature Range	-25+85
Electrical Performance
Contact Resistance	30 m MAX	Mate applicable FPC/FFC and measure by dry circuit, 20mV MAX, 10mA.
Insulation Resistance	500 M MIN	Mate applicable FPC/FFC and apply 500V DC between adjacent terminals or ground.
Dielectric Strength	No Breakdown	Mate applicable FPC/FFC and apply 200V AC (virtual value) for 1 minute between adjacent terminals or ground.
Mechanical Performance
Locking and Withdrawal Force	Locking: 1.96n (N) MAX Withdrawal: 0.49n (N) MIN	Insert and extract applicable FFC (0.3mm thick) at the speed rate of 253mm/minute.
Terminal/Housing Retention Force	3.92N MIN	Pull the terminal at the speed rate of 25 3mm per minute.
Environmental Performance and Others
Repeated Insertion and Withdrawal	Contact Resistance: 60 m MAX	Insertion and withdrawal actuator up to 20 cycles at the speed rate of less than 10 cycles/minute (no power).
Temperature Rise	30 MAX	Carrying rated current load. (UL 498)
Vibration	Contact Resistance: 60 m MAX Discontinuity: 1 ms MAX	Amplitude: 1.5mm P-P; Sweep time: 10-55-10Hz/min; Duration: 2 hours in each X.Y.Z. axes (under DC 1mA).
Shock	Appearance: No Damage Discontinuity: 1 ms MAX	490m/s{50G}, 3 strokes in each X.Y.Z. axes (under DC 1mA).
Heat Resistance	Appearance: No Damage Contact Resistance: 60 m MAX	852, 96 hours, then return to room temperature for 1-2 hours.
Cold Resistance	Appearance: No Damage Contact Resistance: 60 m MAX	-402, 96 hours, then return to room temperature for 1-2 hours.
Humidity	Appearance: No Damage Contact Resistance: 60 m MAX Dielectric Strength: Must meet 4.1.3 Insulation Resistance: 20 M MIN	Temperature: 402; Relative Humidity: 90-95%; Duration: 96 Hours.
Temperature Cycling	Appearance: No Damage Contact Resistance: 60 m MAX	5 cycles of: a) -553 30 minutes; b) 852 30 minutes.
Salt Spray	Appearance: No Damage, Corrosion Contact Resistance: 60 m MAX	48 4 hours exposure to a salt spray from the 51% solution at 352.
SO2 Gas	Contact Resistance: 60 m MAX	24 hours exposure to 505ppm SO2 gas at 402.
NH3 Gas	Appearance: No Damage Contact Resistance: 60 m MAX	40 minutes exposure to NH3 gas evaporating from 28% Ammonia solution.
Solderability	Solder Wetting: 95%	Soldering Time: 20.5 sec; Soldering Temperature: 2455; 0.2 mm from terminal tip.
Resistance to Soldering Heat	Appearance: No Damage, Deformation	Soldering Time: 305 sec; Soldering Temperature: 2455; at least 5 times.